Exhibitor ListView All Search by Keyword by Sector Capability by Sub Group
Make It Stoke-on-Trent and Staffordshire Inward Investment Service works on behalf of the Stoke-on-Trent City Council and Staffordshire County Council to assist organisations that wish to move in to the area. Make It Stoke-on-Trent and Staffordshire offers free and confidential assistance to companies on relocation and expansion. Stoke-on-Trent and Staffordshire’s geographic position within the United Kingdom places the area within close proximity to a number of key car plants, with Bentley, MG, General Motors and Toyota all within an hour’s drive. This makes the area an ideal location for automotive supply chain companies.
If you generate metal waste (scrap metal) whether it from machining, cutting, shaping, bending or just from surplus stock, then you will need to make sure you receive the best value for this scrap material. Utilising over 50 years of combined experience our philosophy is to be ‘scrap metal at its most professional’. 2 Recycling Ltd is part of an new generation of dynamic metal recyclers who deal only B2B and are as far apart as you can get from the more traditional image of ‘scrap metal dealers’. It is this same philosophy that motivated us to become proud sponsors of the BLOODHOUND SSC project, recognizing the importance of inspiring the next generation of engineers into the manufacturing sector.
“2020 Business Performance is dedicated to helping you extract greater efficiency from your existing business and infrastructure. Our three divisions operate individually or in collaboration to deliver cost savings and performance improvements. Energy: Innovative solutions tailored to support the delivery of your organisations cost reduction and environmental strategies which involve light heat and water. Systems: BabelBox is the next generation state of the art BI tool designed to make reporting, analysis and dash boarding as easy as searching the internet. Telecoms: We our partners, we are committed to reducing costs whilst improving voice and data communications within your business.”
2KM are one of Europe’s leading suppliers for machinery and systems used in the manufacture, assembly and finishing of composite components. The company have been supplying turnkey solutions to the wind energy manufacturing sector for the last 12 years with over 700 systems in use throughout the world.
The company manufactures machinery for the processing of reactive polymers and all units are globally backed up by local support centres.
360 Composites (Technology) Ltd are suppliers of a comprehensive range of machines, materials and solutions to improve productivity, health and safety and working environments inclusive of chopper spray, gel spray, silicone spray, RTM and putty, PU and adhesive dispensers. We also supply and install spray booths.
We are the European distributor for GS Manufacturing and the UK distributor for Phoenix Equipment and Silicone Composites Ltd. We supply and service all Graco equipment with a full range of spares. We can create bespoke equipment and adapt materials to suit individual client needs. Come and visit us on stand G155 to learn more.
3DDC specialises in the metal plating of plastics and other non-conductive materials using its proprietary Metalise it … process. The plating process was developed specifically for plastic parts produced using additive manufacturing and 3D printing technologies. However, it has also had impressive results with vacuum cast, injection moulded and laminated composite parts.
The team at 3DDC has an exceptional in-depth knowledge of the range of additive technologies that produce plastic parts and how to plate them. Metalising components with a very precise thickness of metal can provide increased structural strength, resistance to moisture, temperature, humidity and corrosion, and can be used for RFI shielding.
This opens up endless applications for manufacturers, prototypes and components can now be made strong enough for real testing in more aggressive environments.
3DDC is an ISO 9001 : 2008 approved company.
Experts in Additive Manufacturing (AM), 3T produces lightweight, high performance parts usually unachievable by conventional techniques. By working with 3T, prototype and end use production parts can be designed to reduce weight and optimised for high strength. With the UK’s largest combined capacity of laser AM, parts can be produced in a range of high performance materials including Nylon12, Aluminium, Titanium and Inconel. 3T carry AS9100, ISO9001 and ISO13485 approvals.
ACC Silicones manufactures silicone moulding rubbers, adhesives, sealants and electronic compounds in the UK and Italy.
In addition to VBS26, a sprayable liquid silicone that cures quickly at room temperature, ACC have an extensive range of moulding rubbers both addition and condensation cure including new Food Grade approved materials.
The SILCOTHERM® range of thermally conductive silicone adhesives, compounds and Gap Fillers used to dissipate heat in high power electronic components used within automotive and aerospace applications
ACMOS (UK) LTDMore
Acmos is a World Leader in External and Internal Release agents for the Composite Industry. Wind Power approved Semipermanent ACMOScoat Release Systems provide savings in Release Agent consumption and surface preparation. Latest developments in Semipermanent Release Technology show features like – Enhanced release power – Greater number of lifts per application – Improved post-treatment abilities – Increased polarity on manufactured parts – Elimination of Diethyl Ether in the release system The new semi-permanent ACMOScoat Release Systems allow manufacturers in Wind / Aircraft / Mass Transportation / Medical / Recreational / Construction / Marine / Motorsports and other components.
ACS delivers total engine and vehicle test facility integration services. From planning, design, equipment procurement and installation, to construction and commissioning, ACS provides single source project responsibility, which means early identification & clarification of project scope and costs, an accelerated schedule, and reduced administrative burden for clients. Our expertise ranges from turnkey delivery of new technical centers to single test cell renovations and retrofits, and includes development and production facilities.
Test & measurement systems, R&D, end-of-line production test, component test stands/rigs, NVH, design & fabrication of custom test equipment
AcSoft specialises in instrumentation for sound & vibration measurement, representating world class manufacturers of transdcuers right through to data acquisition systems, and application software.
This year we will be featuring several new products.
The 40LS surface microphones from GRAS are already finding fans amongst the aerospace community for measurements on fuselages and wing surfaces, with its low profile, and extended frequency response.
The HEADlab front end from HEAD acoustics is a modular multichannel front end for the powerful ArtemiS software, for noise, vibration, digital and CAN data.
The Acoustic Camera from GFAI is the de-facto standard in acoustic beamforming, offering detailed pictures of noise sources in real-time.
ADS is the Premier Trade Organisation for all companies operating in the UK Aerospace, Defence, Security and Space sectors. Farnborough International Limited (FIL) which runs the Farnborough International Airshow, is a wholly owned subsidiary.
Everything that ADS does is driven by understanding the issues, opportunities and priorities of the four sectors we represent. We are dedicated to representing the interests of our Members and supporting them in growing and developing their businesses.
ADS Members, have instant access to a wealth of expertise, information and support, delivered by a dedicated support team.
Together with its regional partners, ADS represents over 2,600 companies
Advanced Laser Technology is a research and development consultancy that employs engineering staff who have high-level qualifications in manufacturing and laser material processing.
We specify, test and install the latest technology in laser systems; developing as necessary cladding heads, coating methods, recipes and electronics to integrate robots, lasers, material handling and CAD systems. Our expertise helps precision engineers in automotive, aerospace and other industries access new technologies to reduce manufacturing costs while improving output.
Precision part manufacturers within the automotive industry may be interested in our research into new techniques to harden components in order to reduce wear and increase their product lifetime.
AER Stafford is the UK’s largest manufacturer of rubber, foam and plastic components in to the automotive industry. We as part of the Avon group have facilities across the UK and Europe. We specialize in the following areas:-
- High speed , CNC Die cutting
- Vacuum forming
- NVH solutions
- CNC Routing solutions
- Robotically applied sealing products
- Compression moulding
- Rubber and Plastic moulding
- Polyurethane foam moulding
- Water jet cutting
Aero Consultants provide a full range of composite related materials forthe aerospace, automotive and allied industries. We offer advice and support for any issues relating to the manufacture of lightweight compositeparts.
The Company is a service and logistic partner for all materials distributed by them. We own our own large storage facilities and employ a team of fully trained and qualified personnel to guarantee full traceability andproduct quality.
Aeroform France is a leading European designer and manufacturer of quality process equipment for the composites industry. We are specialist in composite processing and repair equipment, we provide off the shelf and turnkey solution for all composite industry sectors. Our newly appointed UK and Ireland distributor North Composite Engineering can supply hotbonders, autoclaves, ovens, specialist heat blankets, heat lamps and all associated accessories to meet your standard and bespoke requirements.
The AAD KTN is the single overarching network across industry, Government & academia. By joining our network you will be able to grow your business through the exploitation of innovative technology. You will increase your chances of accessing UK R&D funding. You will advance your position within the UK’s technology supply chain. You will make better strategic business decisions based on knowledge of the innovation landscape.
Media partner : Stand: A75
Since its launch at the 2006 Farnborough Airshow, Aerospace Manufacturing has grown to become the leading B2B publication focusing on the design, production and supply chain of the civil and defence aerospace sectors. Published 10 times each year, the magazine provides news and exclusive features on the latest technologies, along with comment from key organisations and industry figureheads. Distributed to 11,000 industry professionals within Europe, Aerospace Manufacturing’s informed editorial content serves as a regular source of information for those within the industry making decisions that will shape the aircraft of tomorrow.
Editor: Mike Richardson
Tel: +44(0)1634 830566
Sales Manager: Mark Deadman
Tel: +44(0)1634 830566
Published by MIT Publishing Limited
Featherstone House, 375 High Street,
Rochester, Kent, UK ME1 1DA
Tel +44 (0) 1634 830566
Fax +44 (0) 1634 408488
The Aerotherm Group are industrial engineers, focused on practical process and carbon reduction solutions, providing high levels of innovation, quality and financial payback for our clients, throughout the UK and overseas. We specialise in Bespoke design and manufacture Industrial Ovens, Dust/Fume Extraction systems, air management systems and environmental solutions. The Olmar Group, which was founded in 1945 specialise in bespoke design, manufacture and installation of Autoclave systems, steam boilers and pressure vessels. We have vast experience in the composites, food processing, glass, vulcanisation and pharmaceutical industry. Both companies are ISO 9001 and ISO 14001 and are market leaders in the chosen fields.
AIM Composites Ltd is one of the leading composites companies in Europe working with the latest materials and technologies for a wide range of customers including the Aerospace, Defence, Rail and Marine industries.
AIM can supply a complete composite service, including materials, component manufacture, sandwich panels and Mechanical/FST testing.
AIM can also offer a composite repair facility for both Aerospace and Industrial parts.
AIM is an authorised distributor of Hexcel materials, including honeycomb, prepregs and adhesives.
AIM Composites Ltd
T: +44 1223 441000
As part of the Ainscough Industrial Group, Ainscough Vanguard is the UK’s leading industrial machine mover, specialising in machine removals, machinery installations and the relocation of industrial plant & machinery across the UK and beyond.
We are a specialist provider of Automotive factory installations and decommissioning projects, and continue to provide a consistent, high quality service through experienced in-house personnel operating under current health and safety systems, including CDM regulations.
For 25 years Air Cleaning Systems (acs) has been a leading solutions provider of mist and fume extraction equipment to the aerospace, automotive, medical and sub contract industry.
Our range of downdraught filter benches fully comply with Health and Safety HSG258 legislation and are suitable for de-burring, linishing, sanding and finishing operations.
Supplied in bespoke as well as standard formats acs provides solutions to provide a cleaner, safer working environment.
AirBench self-contained downdraught bench captures dusts generated during sanding and processing of composite materials, drawing them down through the ventilated surface and capturing them in internal filters. Clean air is returned to the room.
Fume and dust extraction problems solved in minutes; AirBench is the UK’s leading downdraught bench and can be demonstrated on site prior to purchase.
“AirBench Ltd will be demonstrating live their down draught Dust & Fume extraction table that must be of interest to those that are keen to meet their H & S obligations under COSHH “
AKTON Recruitment is one of the UK’s fastest growing Manufacturing and Engineering recruitment consultancies. We focus on providing a premier, value added service, by partnering with companies who we choose to work alongside, in order to build long lasting relationships. Our short history speaks volumes for its self, with OEM’s, 1st & 2nd tier companies returning to AKTON time and time again.
We specialise in the following industries, Automotive, Aerospace, Electronics, and Composites & General Manufacturing.
‘Aktrion Group is one of the largest suppliers of fully managed and rapid response, flexible resource service solutions. Working in many diverse industry sectors, including automotive quality and manufacturing, with a UK, European and Global presence. Aktrion have a long history and proven track record of working in high volume industries which are sensitive to volume fluctuations, which demand excellent quality coupled with 1st class customer service’.
Alchemie Ltd is a privately owned U.K. company that specialises in the formulation and manufacture of Epoxy resin, Polyurethane resin and silicone rubber products. Established in 1987, the company has out grown a number of manufacturing sites but is now firmly established at its 5 acre site in Warwickshire.
Alchemie has developed its market share by listening to its customers and distributors to facilitate product development in line with the market requirements. Some of our most successful products are attributed to specific customer requests.
To add to the extensive range of products for the tooling industry, Alchemie have also developed a range of Epoxy and Polyurethane resin for the Electronics market for potting and encapsulation of electrical parts.
The major industry sectors covered by Alchemie in the U.K. include Composites, Electronics, Oil & Gas, Automotive, Formula 1, Rapid Prototyping, Marine and M.O.D.
To assist our distributors and customers, Alchemie offer a comprehensive technical support. The product development chemists are available to discuss any technical requirements our customers may have. We also have a demonstration facility which can be used to offer training for Vacuum casting, RIM moulding, resin tool making and silicone mould making.
Alchemie are an Iso 9001-2008 quality standard registered company. This gives our customers peace of mind and helps us offer full product traceability.
For more information you can visit our website at www.alchemie.com
Alicona UK LtdMore
Innovative Non Contact Measurement solutions:
Alicona provides customer-oriented, innovative standard and customised measurement solutions in the micro and nano range to deliver efficient and easy-to-achieve quality assurance in 3D.
Alicona offers the high-end optical measurement system InfiniteFocus for the laboratory as well as production processes. Key competences include outstanding solutions for the accurate and easy 3D measurement of complex topographies, such as geometries with steep flanks and diffuse reflections.
Leading companies successfully use the firm’s products in research and development activities, as well as in quality assurance. Alicona systems are in use whenever surfaces need to be measured quickly, precisely and reliably.
Continuous research and development guarantees state-of-the-art solutions for optical measurement and inspection systems based on requirements. And with systems designed to serve your particular needs, Alicona’s customer intimacy, service and fair project execution assure products and measurement solutions tailored to your demands.
Goplasticboxes.com will be showcasing for the first time its standardised range of KLT storage containers on Stand G71, Hall 5.
Developed specifically with car manufacturers in mind for the storage and distribution of vehicle parts, Goplasticboxes.com’s KLT containers conform to Europe’s VDA standards for the automotive industry.
Also on display will be a range of Euro containers, and the company’s complete pallet, container and lid system.
Telephone: 01323 744057
Altair empowers client innovation and decision-making through technology that optimises the analysis, management and visualisation of business and engineering information.
Privately held with more than 1,500 employees, Altair has offices throughout North America, South America, Europe and Asia/Pacific.
With a 26-year-plus track record for high-end software and consulting services for engineering, computing and enterprise analytics, Altair consistently delivers a competitive advantage to over 3,000 customers in a broad range of industries, including automotive, aerospace, government and defence, marine, energy and consumer goods.
Come and meet us on stand C86
To learn more, please visit www.uk.altair.com
Amari Aerospace is a fast growing subsidiary of the UK’s largest independent multi-metals stockholder that provides specialist services to customers in the aerospace, defence and allied industries. With an extensive inventory of aluminium, steels, titanium, copper and nickel alloys in all semi-finished forms, Amari Aerospace provides customers with a cost-effective single source for all their metals requirements, over 50% of Amari sales consist of non-standard products.
Amber Composites develop and manufacture performance composite materials. Amber provides materials and technical expertise to a number of industries; these include motorsport, automotive, industrial and marine. Amber Composites has historically been well known for its strength in composite tooling. Amber’s success is based on the principles of developing the highest quality material, providing service that goes above and beyond the expected, and being responsive to customer needs.
Since its founding by Andreas Maier in 1890, our company has lived through many exciting times.
Today we are the leading manufacturer in Europe for clamping and fixture systems.
- Clamping and fixture systems
- Magnetic and vacuum clamping technology
- Hydraulic clamping systems
- Toggle clamps
- Standard clamping elements
AMI-CON is a leading complete supply solution of composite and engineering materials and accessories. From pre-treatment through to application and processing on to finishing, AMI-CON is your ultimate supply partner. We support a comprehensive and complementary range of both new technology and proven chemistry.
We proudly boast a number of technical partnerships and technical associate agreements with the globally renowned and respected businesses we support. Dealing with highly challenging applications, within very tight deadlines has become the frame work that AMI-CON has been specifically and successfully designed around. Our distribution agreements and supplier relationships enables necessary product development and new technological advancements ultimately driven by you.
The University of Sheffield AMRC is a cluster of industry-focused manufacturing R&D centres and supporting facilities. It includes:
- Advanced Manufacturing Research Centre (AMRC) with Boeing, providing advanced machining and materials research for aerospace and other high-value manufacturing sectors.
- Nuclear AMRC, helping manufacturers develop new capabilities in large-scale machining and joining for the energy sector.
- AMRC Training Centre, offering advanced apprenticeship training and higher-level skills for high-value manufacturing.
WELCOME TO THE WORLD OF ANGLO-Krempel COMPOSITE & POLYMER PRODUCT
High performance composite and polymer products from ANGLO-Krempel are used across the globe in demanding applications within the aerospace, defence, medical, automotive and industrial sectors.
Operating from our large, modern manufacturing site in South West England ANGLO-Krempel provide innovative and technically advanced products to world-class customers.
ANGLO-Krempel products touch virtually every element of how we all live in the modern world – in cars, airplanes, defence equipment, trains, ships, new energy, engineering, F1 racing….
As a member of KREMPEL-GROUP we continue to develop new materials and processes for demanding applications and markets.
Anochrome Group is a specialist applicator of surface coatings and pre-applied technologies, serving diverse industries such as automotive, aerospace and telecommunications.
With over 50 years of expertise in the application of corrosion protective coatings for ferrous and non-ferrous components, Anochrome Group offer numerous finishes, including the latest hexavalent chromium free coatings, sacrificial zinc flakes and black topcoats.
A comprehensive range of pre-applied thread locking/sealing products is also available, as well as underhead sealants, including new duplex seals and patches in Precote® 5 and 200 materials.
All companies within the Group are accredited to ISO 9001 or TS16949, where applicable.
Ansomat specialise in assembly solutions for the manufacturing industry. Our dedicated team of PLC and fabrication engineers dedicates itself to providing bespoke assembly solutions to meet our customer’s mechanical and software requirements. Ansomat has been providing bolt tightening solutions for over 25 years utilising various quality brands of electric and pneumatic tightening equipment. We also offer repair, calibration and preventive maintenance services. More information can be found on www.ansomat.co.uk.
ANSYS, founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers, designers, researchers and students across a broad spectrum of industries and academia. The company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The company and its global network of channel partners provide sales, support and training for customers. Headquartered in U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS and its subsidiaries employ more than 1,600 people and distribute ANSYS products through a network of channel partners in 40+ countries. www.ansys.com.
“Founded in 1978, Apex Recruitment is a leading, independently owned, recruitment agency specialising in Automotive, Energy and Utilities, Pharmaceutical/Chemical, and Aerospace Engineering roles, nationwide. With thousands of unique candidates on our database and access to over 10 million CV’s, we can find the right person for your business. We have successfully supported JLR in their recruitment since 1985 facilitated by our highly skilled, market specific consultants. We can support you in all your temporary, permanent and contract recruitment needs.”
Aro PR and Marketing is the only UK communications agency specialising in promoting the composites industry and engineering companies. We use our unique focus and specialist skills to boost our clients’ sales – whether that’s from existing customers or new customers and new markets. Aro can devise and implement PR/marketing strategies that are highly effective in raising your profile. We’ll roll up our sleeves to help your organisation secure its sales and marketing objectives, through successful communication. As a small group of experienced PR & marketing professionals, our philosophy is to work closely with your internal team. Aro’s integrated approach, and being without high overheads, delivers value for money. We don’t cost the earth!
Arpek, High Pressure Aluminium Die Casting-HPDC- foundry, is located in Gebze-Kocaeli. Arpek was founded in 2004.
Arpek uses Bühler Evolution and Carat machinery from 420T up to 1400T in Turkey.
Arpek is qualified on casting tool design and production.
A state-of-the-art plant with a high degree of automation facilitates, the production of complex series and also enables the quick delivery of die casting parts.
Arpek provides an “All-in-one” approach – design, tool production, casting, machining and assembling.
Arup is an independent firm of designers, engineers, consultants and technical specialists offering a broad range of technical services. Our Advanced Technology & Research practice generates value for client through developing and applying innovative concepts, alternative design strategies and advanced numerical optimisation techniques. Advanced analysis is central to our work. We are developers and distributors of the Oasys LS-DYNA Environment – a suite of software programmes used by our engineers to push the boundaries of what is possible with finite elements whilst improving efficiency. The suite has specific tools that allow the user to model and extract data from multi-layer composites with complex geometries and variable fibre layups.
ASC is a leading manufacturer of process equipment including Autoclaves, Ovens, OoA (Out of Autoclave) Ovens, RTM systems and Hot Drape forming equipment. We hold manufacturing approvals for the USA, Europe and China. ASC also designs and manufactures control systems, and bespoke software, our CPC™ Autoclave and Oven control software is utilised by OEM’s such as Boeing, Lockheed, 3M, BAE, GE, USAF & Goodrich. We also provide integrated autoclave and oven production scheduling software. Offices in the UK, USA and China
Composite ply cutters from Assyst Bullmer are in use in all aspects of carbon fibre composite cutting. Our UK customers include some of the biggest aerospace and automotive companies, F1 teams and smaller composite workshops, cutting pre-preg, dry carbon, glass, Kevlar etc. Our cutters can cut single ply straight from the roll or multi-ply, are built in Germany and are renowned for their precision and low running costs.
We also supply everything to make the ply cutter productive:
- CAD software for optimum nesting and cost control
- Robotic takeoff of cut components
- Laser ply alignment and identification (for those without a robot!)
- Automated composite feeding to allow cutting straight off the roll
- automated film removal
ATA Engineering Processes have been trading for nearly 50 Years, supplying Air Tools, Fastener Installation Tooling, Wedglok Temporary Fasteners, Rivet Squeezers, Counter Sink cutters and Cages, Anchor Nut Drill Jigs, Rivet Guns and Router Cutters to Airframe, Automotive and Composite Machining Industries. We hold large Stocks and are able to delivery stocked items on a Next Day service. Our Sales Engineers are from an Aerospace Background so understand our Customer Needs.
Atlas Composites are industry leaders and one of the UK’s most accredited and trusted composites manufacturers.
Our team of highly skilled composite engineers are a dynamic force in the development and manufacture of composite structures for next generation military vehicles.
This experience means we continually provide solutions and components that are both stronger and lighter, yet more efficient and cost effective, improving the performance of existing platforms such as tooling and components for engine-bay doors; high precision radomes; antennae housing and electronic enclosures.
Atlas Composites were one of the first composite manufacturers in the UK to have achieved the prestigious AS9100 Revision C accreditation and are currently working towards SC21 Bronze recognition
ATP has been producing, in accordance with ISO 9001, ISO 14001, ISO/TS 16949, high-quality, solvent free, adhesive film and tape solutions since 1991. Using a broad range of adhesives and support materials we specialise in the manufacture of heat-seal thermosetting adhesive films and a bespoke range of single and double-sided pressure sensitive adhesive tapes for a wide range of applications in the, automotive, electronic, graphic, label, building and construction industries.
Attwater Group is a British company who manufacture and machine thermoset plastic composites in sheet, tube and rod format. These are used for engineering and electrical insulation applications and materials include:
• Epoxy Glass
• Polyimide Glass
• Phenolic Fabric
• Carbon Fibre
Attwater offers CNC cutting and machining of the composites manufactured and has Solid Works 3D Model capability.
AS9100 / ISO9001 approvals held.
Contact: Rachael Kennedy, Sales Director
Attwater Group, Hopwood Street Mills, Preston, Lancashire PR1 1UN
Tel: +44 (0)1772 258 245
Fax: +44 (0)1772 203 361
AIC specialises in providing, service, calibration, control upgrades and system refurbishments for engineering process equipment across a wide range of industries. AIC delivers a premium on site service including training, spares and expert advice, whilst working within the scope of our ISO 9001, 14001 and 17025 approvals. Our new ‘AMCS’ control system launched last year delivers a proven software package, developed in house with hardware provided and supported by Honeywell
Autoclaves Group specialise in bespoke autoclave design, project management, manufacture and installation; backed by excellent technical support and efficient after sales service.
The company’s main focus is on the following industries:
Education / Research and Development
Medical Waste Sterilisation
Come and visit us on Stand B126, we will be delighted to see you there.
Autodesk, Inc., is a leader in 3D design, engineering and entertainment software. Customers across the manufacturing, architecture, building, construction, and media and entertainment industries ¾ including the last 15 Academy Award winners for Best Visual Effects ¾ use Autodesk software to design, visualize and simulate their ideas. Since its introduction of AutoCAD software in 1982, Autodesk continues to develop the broadest portfolio of state-of-the-art software for global markets.
Automated Cable Solutions Ltd offer tailor made solutions for all wire crimping and cable preparation. We offer a large range of New and Used machines for Wire & Cable Cutting and Stripping, Cable Pre feeders, Coax stripping, Pull Testers, Crimping Presses and Mini Applicators, Our suppliers offer high quality and performance with being very price competitive. We also offer a comprehensive design and manufacture of blades and crimp tooling. Showing a new range of machines from Carpenter Mfg. Inc USA and Gamma Italy. Come and see us on Stand B5 for a demonstration on the NEW (budget) Model 93 cut and strip machine and NEW Model 70C-S wire strip and twist machine.
Autonational is an experienced partner for the engineering, production and turn-key delivery of production equipment for composite products.
Because of the variety of composite products, Autonational engineers have a wide range of capabilities, know-how and solutions to optimize the product and production process.
For 35 years Autonational has done multiple projects with a combination of the following techniques: composite product design, composite technology, filament winding (continuous, discontinuous), RTM, mandrel pretreatment, resin storage and dosing, curing, mandrel release, product machining, pressure testing, laser engraving, track and trace…..
Due to our knowledge and experience of system integration, we are able to supply tailor made production lines with all the necessary elements to guarantee a high product consistency and a competitive cost price.
Autoy was established in 1943, and specialises in Sub-Contract precision engineering machining,
handling orders from ‘1 off’ to large volume strategic production runs.
Many of our Customers have been with us for over 30 years, and we count the Aerospace, Sub-sea, Nuclear, Automotive, Printing and Textile sectors amongst them.
Our highly skilled workforce is dedicated to providing our customers with exemplary quality,
schedule adherence and support services.
Aviation Composite’s 2 acre Lasham site houses manufacturing facilities that include environmentally controlled clean room with temperature and humidity constantly monitiored, trimming and asssembly areas, temperature controlled freezers, computer controlled ovens, autoclaves allowing programming of cures up to 240 degrees centigrade and material testing facilities, calibrated to aerospace requirements.
AEL is originally a light aviation based company specialising in structures manufactured in composite materials, now operating mainly in the marine renewable energy and energy conservation fields. AEL offers a one stop service from structural design (in which we have particular skills with fatigue analysis(; through tool manufacture, prototype manufacture and test and series manufacture. AEL has a strong history of project success and basing design on properly researched and tested materials and design principles. From development of a complete light aircraft to development of blades for wind and tidal turbines amongst other projects AEL has a reputation for quality and service and is always up for a challenge if you have one.
Axon Automotive has developed a unique internationally patented process “Axontex” for production of lightweight carbon fibre structural beams. These are particularly suitable for automotive use as discrete components or whole vehicle structures e.g. spaceframes. Extensive research and development has been done on the simulation of the performance of these components together with correlation of real results including crash testing of vehicle structures. Our current projects include a complete vehicle frame, investigation of potential suspension components and motorcycle frames and components. Axon is able to support all aspects of the material from component design, analysis, testing and low volume manufacture.
Base Group is the only company worldwide that supports the entire manufacturing cycle from polymer to 3D machined prototype, model, pattern, jigs and subassemblies. We are an internationally recognised manufacturer of high value technical products and services which aid the manufacture of lightweight composite components. Since our formation we have successfully implemented an ambitious development programme to provide high performance model and tooling boards, pre impregnated fabrics, surface coatings and custom formulated resin systems to the advanced composites industry. These products are supported by a fully integrated design and manufacturing facility utilising the latest 3 and 5 axis milling technology, serving the prototype, pattern and tooling requirements of many advanced engineering sectors including aerospace, automotive and motorsport.
Batten & Allen was established over 40 years ago and has built a reputation as a leading designer and manufacturer of precision stampings and precision high speed tooling.
We meet the needs of a wide range of industry sectors – including electrical, electronic, medical, automotive, telecommunications and solar energy.
Our philosophy is to develop a close working relationship with clients and work together to design and manufacture components for their specialised requirements.
Beagle Technology Group – Stand G150
‘Niche Engineering From Concept To Supply’
Situated in Christchurch (Dorset, UK) since 1955, Beagle Technology Group designs and manufactures metallic and composite parts and structures, as well as highly finished carbon fibre components for the Aerospace, Defence and Marine markets.
Beagle holds NADCAP, AS9100, ISO:9001, and numerous customer approvals, serving a wide range of customers including BAE Systems, Rolls-Royce, GKN, Trelleborg, Sunseeker, General Dynamics, and Agusta Westland.
Having invested over £1 Million in our NADCAP approved composite facility allows us to deliver a repeatable and reproducible product on time and in full. Key enabling technology includes Blackman and White Automated Pre-Preg Cutters, Laser Ply Positioning Systems, 3.5m(D) x 9m(L) Autoclaves, and ISO Class 8 Clean Rooms. Beagle Composites now also offer a unique carbon fibre manufacture and high performance lacquering system that has multiple applications including top end Marine, Autosport and Consumer products.
Stop by our stand (G150) for more information.
For further information or to arrange a one-to-one meeting contact Joseph Crabtree – Head Of Business Development and Marketing – firstname.lastname@example.org – +44 (0) 7887418848
“Providing automotive, aerospace and composites industries with smart and cost-effective solutions: for applications on advanced materials such as carbon, kevlar and light alloys, special systems have been designed to achieve the best accuracy and machining reliability. The major operators in the aeronautical field have chosen our machining centres for milling light alloys, sandwich panels and composites. The outstanding performance and the wide range of machining centres enable to satisfy every customer’s request.”
Bentley Advanced Materials – Stand B171
Bentley Advanced Materials, who have been at the forefront of moulding and casting technology since 1978, will be demonstrating the new vacuum bagging system on Stand B171 at the Composites Engineering Show 2013 held at the Nec Birmingham.
Bentley Advanced Material’s new vacuum bagging system features “instant” custom made silicone bags that are created using either spray-on or brush-on silicone. The new silicone, which is completely neutral and leaves no footprint at all, creates bags that can be used over and over again. The process is much faster, cheaper and greener than the traditional methods widely used in aerospace, automotive and marine composite moulding.
We will also be showing our new range of Epoxy resins, to include castable epoxies that are used for a variety of industrial applications. These are exceptionally easy to use and contain no VOCS and are solvent free. We also have an extensive range of high performance polyurethanes and also epoxy adhesives.
Please come along and meet Chris Warren and Rob Price, who will help you turn your ideas into reality.
We are proud to be able to offer a “Consultancy Service” which can be tailored to your company needs.
Bespoke Composite Panels is an award-winning privately owned company specialising in design, development and manufacture of technology based composite structures. We have produced composite panels since 1988, and were early pioneers in the concept of honeycomb core certification testing. The flexibility of the cores means that a variety of profiled shapes and contoured components can be produced for industries including construction, aerospace, automotive, marine, rail, defence, science, technology and print.
BIBUS METALS Ltd is a major supplier of nickel alloys and titanium to a wide variety of industries including chemical, petrochemical, thermal processing, oil & gas, power generation, automotive, marine, LBGT, aerospace, electrical & electronic.
Products include all wrought forms such as plate, sheet, strip, tube, pipe, bar & billet together with flanges, fittings and welding products.
bigHead develops and manufactures fastening systems for modern composites and plastics. The unique bigHead bonding fastener, a flat perforated head which locks the product securely into position and spreads the load, is welded to a wide choice of studs, nuts, collars, pins and other fixings to offer versatility. bigHeads are simple to use, no drilling, filling or “making good” is needed and reduce production cost. Over 400 standard bigHeads are available at short notice in a wide range of sizes in mild or 316 stainless steel. bigHead’s Engineers also design fasteners for specific applications and provide customers with samples for prototyping as well as critical data to help them optimise design and performance.
We are Europe’s oldest, largest and most experienced manufacturer of technically advanced, reusable, reclosable fastener systems.
Our facilities in Germany are ISO 9001 and 14001 accredited. And our products are also OEKO-TEX Standard 100 approved.
Binder a family company devotes huge resources to R&D. We have developed products and adhesive systems to meet the needs of a very demanding industry. Our markets are diverse and include Transportation, Aerospace and medical applications.
Quality is one of the most important factors for customers when establishing confidence in a company. Before a product is released for sale, it has to be tested in a climatic environment that resembles natural conditions as closely as possible. BINDER is the international leader in its industry and one of the pioneers in developing simulation chambers. Its products are proven in the field, and can be found in numerous laboratories around the world.
Blackman & White is a global supplier and UK manufacturer of high precision automated cutting solutions for a large spectrum of materials and industries. The first choice for many leading national and international aerospace and composite manufacturers and research institutions, the Blackman & White range of static and conveyorized blade and laser cutting solutions are powered by market leading nesting and design software. Sustained by the company’s proven technical expertise and build to order approach, Blackman & White customers continue to document significant productivity increases and cost savings, enabling them to stay at the leading edge of their industry. For more information please visit www.bwcutters.com / www.blackmanandwhite.com
Boilerhouse is a global marketing communications service provider. We provide advice and we design, develop and deliver marketing programmes, initiatives, processes and tools. We offer integrated, multi-channel communications and help our clients save money by improved flow of data and information. We help our clients exploit digital media. We marry traditional communications channels such as events and publishing to digital technologies and new media opportunities. Our strategy of providing implementation not just advice added to a culture of continuous innovation, proactive collaboration and finding the right solution to match each problem has allowed us to grow steadily for the past decade.
Non-damaging tools in composite plastic materials are moulded at the Bojo Inc. factory in California. In-house design and modular tooling facilitate bespoke products and rapid prototyping in a range of material options for our customers worldwide. MRO facilities recognise improvements in productivity and safety which our unique range provides.
TS-16949 manufacturer of innovative solutions focused on lightweighting; including rivets which require no holes, reusable vibration and noise resistant couplings permitting repeated access without need for threads. Compensating fasteners that accommodate tolerance stack-up without loss of performance, alongside market leading RIVNUT® here demonstrated using fully-automated equipment.
A team of competent engineers can visit and discuss your requirements. Development and sampling are all part of our service. Visit our stand to view tomorrows fastening solutions.
Borer Chemie is a leading supplier of products and technologies for mechanical parts cleaning and disinfection. Cleaning of ophthalmic lenses, precision optics, precision engineering and metal parts, flat panel displays, aircraft components and all other items prior to vacuum coating, are just a few of the niches in which Borer Chemie has successfully positioned itself.
Braithwaite Tax Recovery Consultantswww.btrcl.co.uk
Brightek is a leading Taiwan-based LED company. We are a LED packaging manufacturer specialising in various LED components and modules. Our product portfolio includes PTH Lamp, SMD, Dot Matrix, Superflux, CHIP LED, High power LED…etc. For automotive application we are undergoing the important AEC-Q101 test. European Office is based in London, UK, provide our customer no-time-gap for high qualities and fast services on electronics. Vertech is a leading Taiwanese PCB manufacturer providing full range PCB production. Our factories are accredited with TS16949 and offer PCB for automotive, industrial, telecommunication and many other applications. We offer heavy copper, high layer count, HDI, gold bonding, MCPCB and flexible PCB.
British Composites Society – A Division of the Institute of Materials, Minerals and Miningwww.iom3.org More
“The British Composites Society (BCS) is the division of the Institute of Materials, Minerals and Mining (IOM3) that supports the composites community. The BCS provides professional recognition, support and benefits for composite engineers of all ages and levels of experience. It engages in the collation and dissemination of knowledge, training and education across all industry sectors. BCS members work hard to educate, enthuse and support the composite engineers of tomorrow.”
Broadwater Mouldings Ltd, was established in 1973 and is a subsidiary of the Betts Group of companies which employs approximately 178 people. Broadwater operates from a 6,500m² (70,000ft²) purpose built manufacturing facility, on a 17,500m² site (4.3ac) in Suffolk. The size of the workforce may vary slightly depending on workload, but at the time of writing this text 112 people were employed. With an experienced and highly skilled team, offering engineering solutions in the manufacture and supply of Glass Reinforced Plastic (GRP) mouldings and assemblies, Broadwater has a diverse and considerable experience accumulated over more than 35 years, providing a service spanning many industries worldwide
BROWNELL LIMITED design, manufacture and develop solutions to the potential damaging humidity problems that can occur within packaging applications. Desiccant bags, humidity indicators, polymer desiccants and pressure relief valves can all be used to solve different problems. As extended shelf life and product preservation are becoming increasingly important requirements.
BS&B Safety Systems innovates in the design, certification and manufacture of pressure safety devices. Our custom engineered bursting disk designs are developed to achieve the wide range of burst pressures, and to support the operating conditions demanded by the OEM, aerospace and defence industries. From space programs, exploration of fossil fuels, renewable energy to vehicle protection systems, BS&B products lead industry standards in quality, design, safety and performance.
Burgmann Packings Group has over 100 years’ experience in providing high quality braided solutions to customers. In 2011 our dedicated Composite Materials Team was established to produce braided composite materials to match your performance requirements. From feather light Carbon/Epoxy to resilient thermoplastic based composites we can provide braided preforms or moulded parts tailored to your specific requirements. Customer and quality focused, our team of braiders and engineers are continually working to bring the performance advantages of braids to the composites market. Currently the Group consists of manufacturing plants in Ireland, Turkey & China, and offices in Germany.
A part of the Erodex group, BWP offer a full design, build and project management service for complex workholding and lifting solutions.
EDM electrodes, electrode holders and fixtures can be co- engineered and delivered from this one trusted source.
Designs can be produced from a choice of software packages:
Inventor, Autocad, Unigraphics, and Catia
5 axis machining fixtures (Magerle Blohm and Makino viper grinding etc)
Diamond roll dressers
EDM electrodes & holders
C+W Specialist Equipment Ltd, established in 1978 is an ISO 9001 registered company that manufacture Salt Spray Cabinets, CCT Cabinets and Humidity Cabinets. Each cabinet is available in 100, 200, 450, 1000 and 2000 litre capacities and they operate to all the major Salt Spray, CCT and Humidity Standards including ASTM B117, and are used throughout the automotive and aerospace industries.
Caltest Instruments offer high level technical/applications support, an extensive range of demo and rental equipment and a comprehensive service/UKAS calibration department.
Caltest proudly represent a number of industry leading manufacturers supplying:
AC and DC Power Sources and Loads
Electricity Meter Testers and Calibrators
CPC was formed in 2012. In a short space of time the company has gone forward with heavy investment to equip the facility to produce high standard, composite tooling structures and components
The aim of the company is to supply a very high quality product with a rapid turnaround with a budget that suits our clients.
Our attention to detail and a will to produce the best has already landed work from major F1 and Le mans prototype clients
We can produce patterns moulds and components, for one off prototypes to multiple production runs
CPC is a dynamic forward looking company with a vision for the future.
Camcoat are using this show for their European launch of the fantastic DiamonDyze™ ceramic anodising process. Already market leaders in ceramic coating exhausts for performance vehicles this new facility allows Camcoat to enhance their product offering to existing customers and to enter completely new markets such as aerospace,defence and marine.
DiamonDyze™ is similar to existing anodising processes but the addition of the ceramic provides a denser surface to give better chemical, corrosion and wear resistance all with the traditional range of colours
Campbell Associates are proud to provide innovative systems and transducers for measuring sound and vibration for all aspects of engineering.
We have new acoustic mapping tools to help you pinpoint sound and vibration issues quickly and accurately and our sound and vibration transducers are fit for all applications.
We have a UKAS accredited calibration laboratory for acoustics instrumentation, and a full calibration service for accelerometers.
Our number one priority is customer service and value for money. Please come and discuss your requirements at stand F74, Hall 5.
W: www.campbell-associates.co.uk T: 01371 871030 E: email@example.com
CANDA Systems – an IT and Internet Solutions Company specialising in the development of the Web Based Supply Chain Portal – XACTIO an online web portal that improves Supply Chain performance, providing client’s suppliers with real time data online. Supplier statistics on performance, quality, cost, delivery & responsiveness, it is a relationship management web portal that helps communication at all levels between the client and their supply chain. It delivers vast improvements on delivery performance of suppliers with proven results of “on time in full” and “right first time”. The Cloud based software is modular, modules include RFQ’s, Quality Questionnaire, Open Orders, Work Orders, Inventory Management, Reporting with all linked to the clients Production Control Software and designed to work as a bolt on to existing in-house systems.
Cannon is an international Group supplying a wide range of equipment and engineering solutions to industrial end-users. Founded in the early 1960′s with the aim of manufacturing dispensing machines for Polyurethane foams, Cannon has soon reached the leading position in its market and kept it since. In 1988 Cannon has diversified its activities in synergetic fields of the industry, and counts today among its Companies leading suppliers of equipment for Thermoforming, Composite Materials, Moulds, Aluminum Die-casting, Industrial Electronics, Industrial Boilers, Special Heating Ovens, Water and Environmental Treatment technologies.
Sole UK Distributor for Fluid-Bag Ltd, the highly innovative flexible packaging solution for Adhesives & Sealants, Liquids, high-viscosity Pastes & Resins including semi-solid materials.
Carbolite are a UK based manufacturer of furnaces & ovens with over 70 years practical experience & reputation for quality.
Our products are in widespread use for the heat treatment of aircraft components, both for initial manufacture & for MRO as well as in R&D applications..
All of our products are designed & manufactured in the UK under a quality assurance scheme that is certified to ISO 9001:2000. Carbolite’s in depth understanding of aerospace industry standards mans that for those companies seeking to provide heat treatment to NADCAP / SAE Standard AMS 2750 we are able to specify exactly the right furnace or oven to operate within a specific compliance class.
In addition to the enormous range of standard models, Carbolite has the skill & expertise to modify our furnace & oven designs so that they more precisely meet our customer’s requirements, or where required start with a blank sheet of paper for totally custom built designs.
Carl Zeiss will be showing the New O-Inspect 3-2-2 and DuraMax RT machines at Aero Engineering 2013. Carl Zeiss is a market and technology leader in the field of Co-ordinate Measurement Machines, Optical CMM’s and CT Scanners. The Rugby site provides demo, training and contract measurement facilities.
Contract Measurement using both CMM and CT scanners. Contract programming is also provided by our team of expert engineers. We are also active in providing CMM retrofits to non-Zeiss users allowing them to benefit from Zeiss industry leading Calypso software.
Carr Reinforcements will be exhibiting their range of woven Carbon, Aramid and Hybrid fabrics and tapes. Also being exhibited are their range of decorative Carbon fabrics from colours to metallics. In addition Carr’s new developments in low temperature, low pressure Thermoplastic composites will be shown.
Co-locating with Parkhill Textiles
CASiM offers West Midlands manufacturing SMEs the opportunity to test & trial new products & ideas using virtual simulation technology. Innovation doesnt have to be expensive, access world class facilities & expertise without large capital investment giving your business an exciting opportunity to try our & explore the innovative technology in a cost effective, reliable and safe environment. CASiM is a collaborative project between; MTC, University of Birmingham & Rolls-Royce; is part funded by the European Regional Development Fund. The aim of the project is simple, to share knowledge and expertise in simulation & modelling to support & benefit businesses.
We believe that creative thinking and engineering rigour can make anything lighter, stronger, faster and more efficient. Part of the Caterham Group, we’re a specialist company delivering turn-key lightweight structural solutions to all industries. We offer fresh thinking, new perspectives and an unquenchable thirst for improvement. Our focus is on the aerospace, automotive, marine, and motor sport industries.
Our unique experience, spanning more than 25 years, combined with ground-breaking technology and a free-thinking environment means we can deliver tailored innovation for our customers.
Caterham Technology and Innovation (CTI) is part of the fast expanding and dynamic Caterham Group of companies. Created in 2011, CTI has an experienced engineering team who are leading the development of an exciting new range of vehicles and products for the Caterham brand. In parallel, we provide engineering expertise to external clients in the automotive, motorsport, aerospace and marine industries.
We can offer a broad range of specialist skills and test facilities to support your specific project requirements, from initial concept development through to production. Core areas of expertise include; niche vehicle development, lightweight structures, advanced concepts, composites, dynamic performance development, powertrain enhancement, electronic integrations and manufacturing engineering.
Cathay Composites Ltd ( formerly GRPMS/ Umeco Distribution)
A leading distributor to the European composite market with
- Over 40 years of expertise and experience
- The widest and strongest portfolio of composite products from world leading suppliers such as Ashland, Jushi, Cytec and Lantor
- World class service
- Innovation and technical support
Part of the Cathay Investments Group which serves customers across Europe, Middle East and Africa.
“ Global resources; local service”
CC Patterns Ltd is a Machine and Pattern Shop with 3 and 5 axis machining capabilities. We specialise in the manufacture of master patterns and moulds for many Industries, but are equally as happy to manufacture components. We work with many types of material including epoxy tooling block, rohacell, carbon fibre, MDF, metals and various plastics.
CC Patterns are able to provide a complete service including;
- CAD modelling and CAM programming, both using Delcam software
- CNC machining using our Haas machines
- Surface finishing/polishing
We proudly supply F1 teams and use the same expertise to provide a fast, high quality, competitive service to all of our customers.
ELKOM specialises in bespoke heating – cooling platen systems, Heating-Cooling Tables and Composite Vacuum Pressing systems, designed and built in accordance with your specification.
We manufacture electric, water and oil platen systems offering precision temperature control and uniformity up to 250 deg C. They can be supplied as independent units or integrated into your existing equipment. Produced from high quality and well-proven components, extreme reliability and performance is guaranteed.
The CE4MRO concept combines the expertise of two major cleaning technology companies for the ultimate benefit of our customers. FinnSonic and Galvatek are cleaning experts with more than 60 years’ combined experience as a strategic, reliable partner with technical ability and know-how in the aviation industry.
Together FinnSonic and Galvatek form a technical powerhouse that offers turnkey solutions for the aviation maintenance, repair and overhaul industry. A long history with the most demanding of MRO customers has been key to the deep understanding of the technology required. This expertise offers added value with lower running costs and documented, first class cleaning results. Whatever the current condition of your cleaning shop, we can help you take it to the next level and beyond.
CEL, founded in 1992, is one of the biggest European suppliers of honeycomb and foam cores for sandwich panels plus semi-finished sandwich panels. Our presence across diverse industries allows us to produce at the highest levels of quality; satisfying the most specialised requests for custom-made products.
We also offer the most cost-effective way of entering the prepreg production market with the Tipton-Goss hotmelt resin impregnation system.
Censol is an established supplier of spill containment products and specialist low lint wipers to the aerospace industry.
Our unique fully audited and managed Absorbent Stations are a major development in the cost effective control of oil and chemical spills on the shop floor.
Each Station contains Absorbent Socks, Pads and Rolls together with Aircelle and Rolls Royce approved specialist dry and wet wipes for the safe and effective removal of sealant, oil and marking inks.
To find out more visit us on Stand B95
CentraTEQ Ltd have continued their success in the UK as the exclusive UK distributor for ETS Solutions range of new vibration shaker systems, amplifiers, combo systems and associated equipment. With new developments in multi-axis shakers recently released by ETS solutions, CentraTEQ are looking forward to opening new markets for the new products.
In addition to shakers, CentraTEQ Ltd are also the UK distributors for LAB Equipments range of package testing systems and AVCO/AVEX shock testing machines. Due to the breadth of their products and the complimentary nature of their applications CentraTEQ are very much a turnkey solutions provider able to provide extensive experience and support to your current and future test engineering requirements.
If you have an application for new mechanical testing equipment please come and see us at the show.
CGTech is the developer of VERICUT® CNC Machine Simulation, Verification and Optimisation software. VERICUT protects CNC machine tools against potentially disastrous collisions by providing a virtual machining environment for program simulation and testing of post processed CNC code.
CGTech also offers programming and simulation software for the rapidly growing CNC Composites Automated Fibre placement market.
Based in Irvine California CGTech have subsidiaries in UK, France, Germany, Italy, Japan, China, Brazil and resellers throughout the world.
China Outsourcing Ltd is a supplier of cast, forged, machined, fabricated and sheet metal propriety parts and sub-assemblies manufactured to our customers’ drawings and specifications. We have a very experienced team of engineering, quality and procurement professionals both in the UK and China. This allows us to use the very best of Chinese manufacturing to provide great prices without compromising on quality or delivery.
Chomarat, specialist in textile reinforcements for composite materials provides a large spectrum of technical reinforcements (glass, aramid, carbon), for different markets: transportation, marine, building & construction, energy, protection, civil engineering, sports, and luxury goods. Chomarat manufactured products include the RovicoreTM family of products for LRTM, RTM, CCBM and the traditional vacuum infusion Process. Chomarat also produces woven and multi-axial fabrics under the tradename G-PLYTM (glass) and C-PLYTM (carbon). With C-PLYT Bi-Angle and Advanced NCF range, launched in partnership with a research group of manufacturers and academics, Chomarat,opens new perspectives for lighter composites with better performance.
Clayton provides HEPA-filter vacuums and source-capture shrouded tools to aerospace manufacturers, aviation maintenance, repair and overhaul facilities and composite fabricators worldwide. Hazardous dusts in the workplace from composite materials, coatings and heavy metals cause serious health issues and compensation claims. The best way to avoid them is to capture dust at the source during sanding, grinding and a host of similar processes. HEPA-filtered vacuums range in size from an ultra-portable single-user model to large central systems. Clayton offers a wide variety of innovative tools for dustless sanding and composites fabrication to remove dust at the point of generation. UK Agent Craig Tools International Ltd Tel-01280 700101
CMA Moldform Ltd is a 1st Tier supplier to major companies in the automotive industry and numerous manufacturers.
Services offered include:
• Vacuum Casting
• RIM Moulding
• Pressure Casting
• Centrifugal Casting
• Component Finishing
CMA Moldform produces exceptional quality master patterns and moulds using CAD design, SLA/SLS and CNC machining, all completed to the highest possible quality standard (ISO 9001).
Nottingham based machine tool manufacturer CMS provide large format 3 & 5 axis CNC machining centres and waterjet cutting machines for a wide variety of applications within the aerospace sector, offering the very latest technology guaranteeing highly flexible, productivity and full integrated solutions.
Typical applications include
• Carbon fibre machining
• Composite trimming and drilling
• Honeycomb machining
• High speed machining of structural aluminium components
• Machining of stacked aluminium
• Waterjet cutting systems from
High-Density Metals We are a market leader in manufacturing tungsten-based high density metal alloys in rough oversize to finish, semi-finished and finished machined parts. We manufacture a broad line of tungsten based high density materials at our facility We are certified AS9100C and ISO 9001:2008 for the manufacture and machining of high density materials. Our manufacturing expertise in powder mixing, pressing, sintering and machining allow us to provide world-class quality and our responsive service and application experience allow us to offer valuable solutions to many customers around the world.
Cobham Composite Technologies is part of the Antennas Strategic Business Unit within the Aerospace & Security Division. The company designs, develops and manufactures high performance composite structures and radomes for the Aerospace, Defence, and Communications markets.
We deliver a through life solution, covering design, manufacture, in-service support / repairs to aircraft structures and radomes utilising a wide variety of materials and manufacturing techniques.
Cobham’s vast experience in the use of advanced composites have placed us at the forefront for design and manufacture of specialist components and structures in Europe.
The first choice for composite structures used in demanding environments.
Codem Composites is a technology business in the rapidly expanding market of carbon fibre component manufacture. Keeping pace with the latest materials and technologies, our highly skilled team use their wealth of expertise and experience to provide a complete solution to the challenges that face our customers.
We offer a competitive, turn-key service to suit your needs, from CAD model to completed components and assemblies. Having a specialised team allows us not only to meet our client’s expectations but in most cases exceed them.
Combined Composite Technologies operates as a business unit within Momentive Speciality Chemicals, a global company of $8bn offering financial stability and resources.
From Design, to prototyping and component manufacture our collaborative customer driven approach ensures the highest quality solution for tooling and components to the Aerospace, Automotive and Defence sectors.
Our excellent reputation is based on providing unique solutions to complex challenges and we do this by bringing our deep technical expertise, market experience and technology portfolio to bear.
Our new 44,000 sq ft facility and over 50 years’ experience can help you through the complex process of making the virtual, actual.
Composite Integration Ltd provides market-leading, innovative and well-engineered solutions to the composites industry, specialising in RTM (Resin Transfer Moulding).
The company manufactures a full range of RTM machinery and ancillary equipment supported by comprehensive tooling and training services.
Customers include manufacturers in the aerospace, automotive, defence, construction and marine industries.
Based in the UK, the company exports worldwide supported by an experienced distributor network.’
compositejobsearch.com is the first and only jobboard dedicated solely to recruitment for the Composite Industry, working with and on behalf of suppliers, R+D specialists and production companies globally. The site encompasses every type and category of position from graduate researchers to senior management, and every area from design through to customer support as well as more specialised requirements. If you are looking to recruit or be recruited then compositejobsearch.com is your only choice – why not visit the website and see for yourself today?! SPECIAL OFFER: THE ENTIRE SITE IS FREE OF CHARGE UNTIL 2014!! MAKE THE MOST OF THIS OFFER, TODAY!!
Composite Test & Evaluation Ltd is an Independent UKAS 17025 approved test laboratory specialising in the testing of a variety of non-metallic materials such as composites, adhesives, foam and honeycombs to name a few. The company draws on over 10 years of experience in the testing of non-metallic materials within the aerospace industry and can offer its customers access to this technical expertise as well as a variety of testing services. CTE is a well-equipped facility with the ability to provide solutions to its customers ranging from simple material batch release testing through to full material qualification programmes.
CTE’s current customer base includes companies such as:- AgustaWestland Ltd, National Composites Centre, McLaren, Cobham Advanced Composites Ltd, Tods Aerospace Ltd etc.
Please visit our website for more information on our capabilities.
Composites Evolution is a supplier of innovative, sustainable materials to the composites industry. Product lines comprise fibres, resins, prepregs and sheets based on natural, bio-derived, recycled and recyclable feedstocks, which enable customers to meet cost, weight and environmental targets. Specific products include Biotex high performance natural reinforcement yarns and fabrics (Jute, Flax, Flax/PP, Flax/PLA etc.) and PFA bio-based, fire retardant prepregs.
Composites Horizons, a division of AIP Aerospace LLC, manufactures components and assemblies in high temperature composites for the aero engine/nacelle industry. This includes poyimides, BMI and epoxy resins usually with, but not limited to, carbon fibers. The company also produces parts made with ceramic oxide materials with performance up to 2000F.
Composites UK Ltd is the trade association for the UK composites industry. The group represents the whole supply chain from research and development organisations through to materials suppliers, manufacturers and end-users. Our key objective is to support industry with advice on technical and legislative issues in order for it to continue to grow and to compete in the competitive world of global composites production. With over 145 members the association is a strong industry voice.
STAND: A23 Supporting media partner
OK, we admit, we can’t make containers any more interesting than they are – they are big and steel and box-like. What we can do though is a be container company with the GAS factor because we do Give A S**t about our customers and the service we offer. If you’ve been let down by other storage companies or just want to talk about storage to someone a bit more interesting, come and have a chat to us on stand E156a. We’re in disguise as Team Refrigeration today, but we’re not just about being totally cool.If you’re too shy or busy to come and see us, you can always call Tim on 07860 179664 or email firstname.lastname@example.org We’d really like to hear from you.
COREX-Honeycomb is a UK based company producing high quality aluminium honeycomb core. Aluminium honeycomb core can be tailored to the exact requirements of the customer and supplied in the following conditions: expanded or unexpanded, as full blocks or cut slices, perforated or non-perforated and treated to prevent corrosion. COREX has been producing quality aluminium honeycomb since 2005, for use in industries including rail, defence, automotive and marine. At the start of 2012 the company’s quality management system was certified to BSEN9100:2009. Aerospace QMS for aeronautical, space and defence.
Cosworth provides high performance engineering and manufacturing solutions to customers in the aerospace, automotive, defence and motorsport industries. Cosworth has a long and distinguished history of engineering class-leading engines and electronics which has grown out of our unique experience in world class motorsport. Cosworth is able to deliver a wide range of programmes from concept design and hardware prototypes through to niche volume production and Tier 1 supply.
The Faculty of Engineering and Computing at Coventry University is committed to working closely with industry partners and is proud of its long history of business engagement.
Our key services include:
- Internationally recognised research
- Accreditation of existing company training schemes
- Tailored professional development for the workforce
- Consultancy to solve your business problems
- Funded support through specific projects
- Graduate placements and employability support
Come and meet us on stand G18 or visit www.coventry.ac.uk/ecbusiness to find out more.
Craig Tools International Ltd an associate company of Craig Tools Inc. California USA. A manufacturer of standard & specialist rotary cutting tools for aerospace, automotive, military & industrial markets. May 2006 acquired the assets of ‘Bardolph Aircraft Tools’ a long established UK based supplier of aircraft tools and consumables. June 2013 appointed agents for Clayton Associates source capture dust extraction. Visit us on stand B113 for a live demonstration of the Clayton clear revolution shrouds. With many years of experience we are able to offer technical & professional advice covering all products that we sell across all industries. We look forward to meeting new & existing customers to discuss your tooling requirements.
Ambersil is the global brand of CRC UK, and is well known and respected throughout all industrial segments. A British based manufacturer, Ambersil has been providing a Complete Chemical Solution™ for over six decades to professional maintenance engineers. Carrying multiple approvals from aviation, automotive, and military; the Ambersil range covers: Cleaners, Degreasers, Lubricants, Oils, Greases, Anti-Corrosion, Wipes, and more – over 200 products
Cresco Industrial Supplies Ltd.
As a UK Master Distributor for ADL Insulflex™ we offer the complete range of Insulflex™ products, at competitive prices, complete with customer service that is tailored for each individual requirement. Many of our products have international approvals ranging from MSHA, Germanischer Lloyd and UL 1441 as well as certifications that run from abrasion, flame, molten splash and oil resistance.
Formed in 1990, Cristex Ltd. has steadily evolved to become the UK’s premier supplier of High Performance Fibres and Fabrics for the UK Composites and Reinforced Plastics Markets.
Representing several World Class companies in the UK, Cristex supplies a comprehensive range of products manufactured from Glass Fibre (E.C.S. ECR), Carbon fibre, Aramid, Dyneema®, Thermoplastic and Natural fibres.
The scale of product usage is extensive, ranging from Automotive, Aerospace, Marine, Wind Energy Generation, Sports and Recreation, through to National Utility Provision. With many years of industry experience, the Cristex Team is available for consultation to assist in the development of intelligent solutions to meet every requirement.
Innovative products and continual improvements in production technology combine to ensure that Cristex clients always receive the highest possible level of quality and service.
Curtiss-Wright Surface Technologies (CWST) provides highly-engineered processes through its international network of over 75 operating divisions and specialist onsite teams. These surface treatments enhance critical components by improving life, strength and performance. CWST serves major industries worldwide including aerospace, automotive, energy, marine, medical and other specialty industries. Since our earliest involvement with the aerospace industry over 100 years ago we continue to meet the complex challenges of our customers by delivering the latest in high-technology solutions including controlled shot and laser peening, thermal spray, engineered coatings and analytical services.
Cutting Industries is a manufacturer of high quality rubber, foam & plastics components. The business has a team of highly skilled and experienced production operatives. From design to delivery, Cutting Industries offers its customers a complete service, supported by our excellent technical and after sales teams.
Our products include;
- Washers, seals,
- Insulating pads,
- Air filter foam for breathing and industrial,
- Sealing foam,
- Abrasion resistant rubber,
- Rubber & urethane grading screens,
- Fuel tank strap extrusion.
CVT was established in 1977, specialising in the Design and Manufacture of UHV
components and systems, and is currently extending its capabilities into new markets.
Major investment in plant, machinery, premises and personnel followed our acquisition
by The Lipco Group in 2011. We provide a complete engineering package.
Our services include – 3D Solidworks CAD/CAM, 5 Axis Machining, Coded Tig welding
ISO Class 5 Clean Room Assembly and Test.
“Cygnet is a specialist automation integrator. We have vast knowledge of Industrial Automation and robotics, machine vision & inspection, & motion control.
We apply best practice and solution to any application, whether it’s a small modification to an existing system, design and development of a full production line or complex development of a new process. Our asset is the understanding of project and customer requirements from conception to completion. We work on our own projects and in partnership with OEM’s or directly with end users in a diverse range of sectors including, but not limited to, aerospace, automotive and composites.”
CYTEC is a global provider of advanced composite and process materials for aerospace, automotive, wind energy, motorsport, marine, mass transportation and other demanding applications. Our focus on technology and application expertise allows customers to adopt more efficient manufacturing approaches. Our product portfolio supports the end-to-end manufacturing of composite parts and includes tooling, fibre, prepregs, resin systems, vacuum bagging, and adhesive, resin and surfacing films.
Dalau specialises in the precision machining of plastic components in all engineering plastics to the medical, electronic, and aerospace industries most stringent technical specifications. We machine PTFE, PEEK, POM, PA, PE, ETFE, Ultem, for prototyping, small batches, and large volumes.
We use Multi & 5 axis CNC machining centres, Swiss Sliding Head machines with CAD design. Quality is assured by our in-house computerised Statistical Process Control (SPC) system.
We produce superior PTFE Films for high temperature composite applications.
Approval’s: AS9100 Rev C & ISO9001:2008, Underwriters Laboratories and WRAS.
Ford Road, Clacton-on-Sea, Essex, CO15 3DZ, England
Tel: +44(0)1255 220220
Fax: +44(0)1255 221122
Reg. No.: 609539
AS 9100 BS EN ISO 9001: Q5588 Dalcon 001 E135533
Subsidiaries: Dalau Incorporated, USA, Dalau GmbH, Germany
Dantec Dynamics is a leading supplier of integrated optical measurement systems for fluid dynamics and solid mechanics applications. Delivering state-of-the-art turn-key systems using the latest techniques, Shearography, ESPI, Digital Image Correlation, LDA, PIV & CTA.
Shearography is a non destructive testing technique widely used in the aerospace industry for inspecting composite materials. Shearography covers large areas quickly providing users live results on the detection of delaminations, disbonds, and impact damage. R&D, in-service inspection and fully automated production systems are available. The RAF is the UK’s largest user, for in-service inspection of the Sentry aircraft.
Digital Image Correlation is also an optical technique, measuring strain and deformation. It provides full field, 3D, non contact results over a flexible measuring range of mm to m on any material. It is ideal for material & component testing, FEA validation and high speed impact & vibration analysis.
Provision of expert consultancy, design and training services. An extensive range of composite training courses for beginners, technicians, engineers and designers. Remote consultancy services, bespoke courses and on-site training to suit your needs.
For full details please call +44 (0)1582 791001
or visit our website www.darkmattercomposites.co.uk
About Dassault Systèmes
Dassault Systèmes, the 3D Experience Company, provides business and people with virtual universes to imagine sustainable innovations. Its world-leading solutions transform the way products are designed, produced, and supported. Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world. The group brings value to over 150,000 customers of all sizes in all industries in more than 80 countries. For more information, visit www.3ds.com.
CATIA, SolidWorks, ENOVIA, SIMULIA, DELMIA, 3DVIA, 3DSwYm, EXALEAD, and Netvibes are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.
Come and see us on stand C10
Dedienne Multiplasturgy® Group – Stand: A101
Dedienne Multiplasturgy® Group; a convertor of thermoplastics and technical and high performance polymers for over 65 years, offers a unique MULTIPLASTURGY offering, combining project management, machining, forming, thermoforming, stamping, injection, RTM, dual material injection, EMC, decoration and metallisation. Since 2007, a licensee of RocTool for plastic composites, 7 sites in France and Romania all ISO 9001 accredited and EN 9100, AQAP 2120 or ISO/TS 16949 and ISO 14001 (market dependant).
Established in 2005, Development Engineering & Enterprise Ltd (DEE-Ltd) provides innovative engineering solutions to a broad spectrum of customers and market sectors. Through our unique relationship with Toyota DEE-Ltd offers, new, direct from plant engines and transmissions for use in a variety of different applications. DEE also offers a full suite of engineering support and consultancy capabilities, ranging from full vehicle programs to component & system development projects.
Delcam is the world’s leading specialist supplier of machining software, with supporting programs for design and inspection. The company offers a comprehensive selection of software for toolmaking, prototyping and production machining, including PowerMILL for high-speed and five-axis machining, FeatureCAM for feature-based programming, PartMaker for turn-mill equipment and Swiss-type lathes, and ArtCAM for routing and engraving. All these programs allow companies to increase productivity, reduce lead times and improve quality.
Delcam Professional Services works with its clients to improve their manufacturing processes by increasing productivity, improving accuracy and shortening lead times. The services provided vary from supplying design, reverse engineering and CAM-programming resources when the customer’s existing staff are overloaded, through to developing completely new turn-key processes for the production of novel designs, including the manufacture and inspection of prototypes or initial production runs within Delcam’s Advanced Manufacturing Facility.
DELO Industrial Adhesives is a world leading developer and manufacturer of customized industrial high technology adhesives and corresponding curing and dispensing equipment. Our experienced teams of engineers, scientists, and chemists work on fast and reliable solutions for individual customer needs. DELO offers adjusted adhesives for bonding different materials. The focus on Automotive Engineering 2013 will be on adhesives for automotive applications.
Company: DELO Industrial Adhesives
Street: DELO-Allee 1
City: 86949 Windach, Germany
Phone: +49 8193 9900-0
Fax: +49 8193 9900-144
Formed in 1975 as manufacturers for the coating, laminating and converting industries, Delpro has built on its experience and expanded its range to include the design and manufacture of pre-preg machines and other composite material processing equipment.
Details of our new UD and pre-preg composite production line will be featured together with information on our range of standard and/or customised machines for composite material processing , all of which is available for inclusion in original machinery installations or for retrofit to existing plant.
Dentons is a global firm driven to provide a competitive edge in an increasingly complex and interconnected marketplace. Dentons has an outstanding reputation and valued clientele by responding to the local, regional and national needs of a broad spectrum of clients of all sizes – individuals; entrepreneurs; small businesses and start-ups; local, regional and national governments and government agencies; and mid-sized and larger private and public corporations, including international and global entities. Dentons’ is located in more than 75 locations spanning 50-plus countries across Africa, Asia Pacific, Canada, Central Asia, Europe, the Middle East, Russia and the CIS, the UK and the US.
Founded in 1986, Desktop Engineering (DTE) has developed an extensive customer base in the automotive, aerospace, architecture and general mechanical engineering markets. Desktop Engineering is an accredited business partner with Dassault Systemes and MSC Software, supporting the industry standards of CATIA, DELMIA, ENOVIA, Nastran, Patran, Marc and Adams. As a full service provider, DTE trains and supports its customers in the use and application of these solutions, together with methodology development to improve design productivity and efficiency. Above all, DTE prides itself on quality, responsiveness and technical excellence which is why it has such a high customer retention rate.
DEVELOP3D Magazine looks at the essential role technology plays in product development, investigating how it is used at leading design and engineering firms from concept all the way to manufacture.
Key topics range from 3D CAD/CAM/CAE software and workstation technology to 3D printing, reverse engineering and mould and die design.
DEVELOP3D is available in print, PDF, online and on the Kindle, Android and the iPhone/iPad. The magazine features a bold contemporary design and is FREE to UK subscribers.
Dewetron designs and manufactures a range of measurement systems, amplifiers, A-D boards and software, with focus on Automotive, Transportation, Aerospace and Industrial markets. In addition to their existing range of measurement systems Dewetron will be launching their latest product family, DEWE2-TRION, with a modular amplifier/A-D architecture, available in different formats for portable or laboratory based measurement applications. In addition, SIRIUS data acquisition instruments from Dewesoft sample at 200KHz per channel with dual core 24bit ADC and offers a range of input amplifiers for accelerometers, strain gauges and voltage measurement up to 1000V, all fully isolated. The 8 channel, USB instrument can be stacked with other SIRIUS
DIAB philosophy is to provide solutions based on long-term experience and customer insight.
DIAB is a world leader in composite solutions and high-performance core materials.
DIAB solutions and core materials are based on in-depth understanding of our customers’ needs. We provide our customers with high performance and light weight products and deliver all the benefits of the DIAB experience: world-wide supply, availability in kit- and sheet form, a safe and long design life and a stable customer production process with excellent bonding results.
At DIAB, we truly believe that our customers gain many benefits from us being a global company. Delivering high value by providing solutions, we work in close co-operation with our customers. To facilitate this, our strategy is to have sales representation close to our customers. DIAB is a global company with sales and customer support in 17 countries, including DIAB Ltd based in the UK and an extensive network of distribution channels.
DIAB has manufacturing units in Italy, Sweden, the United States, Ecuador, China, India and Lithuania.
The essential finishing touch
We are a corporate branding specialist with over 30 years’ experience of manufacturing innovative, high quality, badges, nameplates, fascia’s and labels.
We’ll help you design and finish the perfect customised badge, nameplate or label by selecting the right style and finish from our vast range of processes.
Whether the badge is gracing the front of the latest sports car, reflecting the quality of an advanced Hi-Fi system or simply displaying important information on aviation electronics, you can trust Diametric to offer the right solution.
For further information on how we can apply the essential finishing touch to your product, please visit us on stand J75.
Disposables UK are one of the leading manufacturers and distributors of paper disposables and related cleaning and hygiene products. The Perfect Finish and Optimum ProWipers brands of non-woven wiping products offer a complete portfolio of top quality wipers developed to effectively meet the requirements of every wiping and polishing task. The consistent quality and performance of the Perfect Finish and Optimum ProWipers brands build confidence in use together with reliability, variety and flexibility. The Perfect Finish brand is ideal for the automotive re-finishing market while the Optimum ProWipers range has a portfolio of wipers developed for automotive engineering. We look forward to welcoming visitors to our stand I46.
‘DJB Instruments UK Ltd has been at the forefront of dynamic vibration and pressure measurement for nearly 40 years. Previously known as DJ Birchall Ltd they are the UK’s leading manufacturer of accelerometers and microphones with their unique Konic ceramic sensor design. Offering a wide range of instrumentation and cable assemblies manufactured to any configuration they are able to offer quick delivery and custom design solutions for any application.
DJB will be exhibiting a range of new and existing products including, High Shock accelerometers, High temperature IEPE accels to +185C, Seismic and their ultra-miniature A/128 IEPE teardrop accel at just 0.25gm.’
DNAagile provides the building blocks for supply chain excellence by aligning people, processes and systems to the DNA of manufacturing businesses and their supply chain partners. For more than 25 years we have been providing innovative production control systems, ERP and supply chain software to high value manufacturing businesses enabling our clients to establish a robust foundation for growth through streamlined processes, standardisation and systems integration. Our advisory team facilitate supply chain development programmes and change management projects by implementing best practice processes and embedding a committed team through coaching and development.
Machines and systems developed and manufactured by the Hilger u. Kern / Dopag Group are used to meter, mix and dispense plural component polymers in the production of composite products across the globe, especially within the automotive, aerospace, wind energy, defence, rail and shipbuilding industry sectors.
With more than 300 employees, 8 subsidiaries and 24 distributors worldwide, the group is one of the leading polymer dispensing system manufacturers in the world serving these high technology sectors.
DOPAG (UK) Ltd is a subsidiary of the Hilger u. Kern / Dopag Group, who for almost 35 years has been at the forefront of developments in metering, mixing and dispensing technology for plural-component polymers and single component media.
Dormer is one of the world’s foremost producers of solid carbide and high speed steel cutting tools with a comprehensive and ever-evolving product range covering a wide range of drilling, milling and threading applications.
A key member of the Sandvik group, Dormer has sales units in 25 countries serving over 100 markets worldwide. Pan-continental logistical systems ensure unrivalled product availability and delivery lead times
2013 marks Dormer’s centenary year. The company has, since the early part of the 20th century, developed a reputation for quality, innovation and brand leadership and remains at the forefront of the global tooling industry.
DQS UK Ltd is recognised as an accredited certification body that assess management systems and processes to the requirements of more than a 100 nationally and internationally recognized standards and specifications, offering ISO 9001 (Quality), 14001 (Environmental), BS OHSAS 18001 (Health and Safety), ISO/TS 16949 (Automotive), EN9100 (Aerospace), ISO50000 (Energy) Sedex Supplier Audits (which are a specific combination of Quality Management, Environmental Management, Health and Safety, Social Accountability and financial requirements for suppliers) and many more.
With a global reach by way of our international offices located in more than 60 countries and with over 2300 active auditors worldwide, we can provide a cost effective service.
Dust extraction specialists, Dustcontrol UK Ltd, are not satisfied with just selling products. We manufacture cyclone based industrial extraction systems and portable dust extractors with very high levels of filtration to your requirements.
Our main goals are to help you achieve an efficient production process, increase productivity, improve product quality and promote a safe working environment. The fact is that everything runs so much more smoothly when you avoid being stopped or disturbed by dust and other pollutants. In short, Dustcontrol supplies stationary extraction systems and portable machines to help companies all over the world to achieve better results.
Eastman Machine Company manufactures the industry’s widest range of classic, hand-held and manually-operated fabric cutting machines; as well as a comprehensive line of fully automated, computerized cutting and plotting systems. Manufactured with the highest quality materials, built to precise specifications, and subject to rigorous testing, Eastman’s line of cutting systems have been setting the standard for over a century. Eastman’s world headquarters are located in Buffalo, New York, U.S.A. with sales offices, agents and distributors around the world. The company was established in 1888 and is a fifth-generation, family-owned business with a broad base of elite customers in the wind energy, marine, composites, military, aerospace and industrial fabrics industries.
Eclipse Magnetics are a world leader in magnetic technologies, designing and building magnetic solutions for wide range of industries.
Their range includes magnet materials and customised assemblies, magnetic filtration systems, magnetic lifting and handling systems, and magnetic separation systems for advanced production and processing lines.
Eclipse provides a full package of support services such as consultation, product design, protoyping and testing, to ensure the customer finds the optimum solution.
EEF is dedicated to the future of manufacturing. We work with the UK’s manufacturers, from the largest to the smallest, to help them work better, compete harder and innovate faster. With our unique combination of business services, government representation and industry intelligence, no other organisation is better placed to provide the skills, knowledge and networks they need to thrive. Not a member? Join us and benefit. Call us on 0845 250 1333 or visit www.eef.org.uk.
Address: Mount Pleasant, Glazebrook Lane, Warrington, WA3 5BN
Tel: 0161 777 2500
Fax: 0161 777 2522
Elder Engineering (Herts) Ltd has more than 30 years experience with the supply and selection of engineering plastic materials in stock shapes, semi-finished or machined part form. The range of materials has developed over the years to encompass everything from general engineering plastics through to the advanced and high performance.
Elder engineering are certified to AS9100 Rev C and BS EN ISO 9001:2000. Our priority is focused on quality and service at competitive prices to our customers in the aerospace, food, packaging, medical, printing and many other industries.
Elder Engineering (Herts) Ltd
City Park, Watchmead
Welwyn Garden City
Media partner : Stand: J101 – Headline sponsor
Media partner : Stand: J101 – Headline sponsor
Electrox manufactures laser marking systems for permanent product identification and traceability on a wide range of materials including most metals, plastics, wood, glass etc. All Electrox laser marking systems can be integrated onto production lines or supplied with a safety workstation for a turnkey solution.
Electrox has been manufacturing laser systems for materials processing for over 30 years.
Emerald is a global publisher linking research and practice to the benefit of society. The highest quality of double-blind peer reviewed research is at the heart of what we do, working alongside some of the most prestigious contributors in their respective fields.
One of our specialist collections, Engineering has editorial representation at 75% of the world’s top 20 engineering universities and almost 70% of the journals are indexed by Thomson Reuters.
Emkay Plastics are the Official UK Distributors for Rohacell
Steve King and Paul Meek formed Emkay Plastics Ltd in 2000 and are Stockists for the distribution of Rohacell IG-F/WF and IG-UF foam in the UK and Eire.
Emkay Plastics Ltd has invested in a state of the art horizontal band saw. This enables Emkay Plastics Ltd, to cut Rohacell IG-F/WF/UF to various thicknesses and sizes, to a tolerance of +/-0.2mm depending on customer’s requirements. Emkay Plastics can currently offer the following grades and densities from stock. 31. 51, 71 and 110 IG-F densities, also available from stock are 51, 71 and 110 WF. We stock a specialist type of Rohacell for modelmaking 51 UF (ultra fine).
Engis (UK) Ltd. is part of the Engis Corporation, a world-wide organisation, which manufactures and markets superabrasive finishing systems for operations that demand precision surface polishing and close tolerance requirements. Engis provides products, services and technological advances in several key areas including: diamond flat lapping/polishing, diamond and CBN-plated tools, bore finishing tools and machines, tool room products and accessories and R&D and technical support.
ENSINGER Ltd specialises in the manufacture of standard and high performance engineering plastics as well as high precision plastic machined components for many industries including aerospace. Five-axis CNC turning, milling and routing capacity is available and engineering drawing data can be accepted in many electronic formats.
Telephone: +44(0) 1443 678400
Fax: +44(0)1443 675777
EOS is the world leader in laser sintering. Laser-sintering is an additive layer manufacturing technology and the key technology for e-Manufacturing. It enables the fast, flexible and cost-effective production of products, patterns or tools directly from electronic data. The process accelerated product development and optimizes production processes. EOS thus sets the standard for developing intelligent e-Manufacturing solutions for industrial applications. Aeronautics is one of the main growth markets for e-Manufacturing. Typical applications include engine and turbine parts, as well as components for cabin interiors. Fully operative parts with complex geometries and aerodynamic properties can be made available.
Designed for the unique needs of key industries such as aerospace, Epicor software provide the end-to-end, industry-leading solutions and the domain expertise you need to increase operational efficiency and drive competitive advantage. With nearly 40 years of experience in delivering innovative, award-winning ERP and software solutions to our customers, Epicor is a strong, stable partner that you can rely on now and in the future.
Here at epm technology we combine industry know-how with a can-do attitude that constantly pushes the boundaries of composite technology.
Our highly-skilled workforce manufactures components for high performance engineering industries from aerospace to motorsport, from an existing product to a truly bespoke solution.
Like you, our customers are likely to be world leaders in their field, demanding quality and delivery, 24 hours a day, seven days a week.
So, whether you find yourself visiting us on Stand 647 at the show or our Technical Centre in Derby, we’ve created an environment that’s customer-centric, displays attention-to-detail, drives innovation and built on loyalty.
Winning takes talent, to repeat takes dedication.
The EPSRC Centre for Innovative Manufacturing in Composites undertakes early-stage research to enhance the competitiveness of the UK composites industry by investigating core industrially relevant composites manufacturing technologies. The EPSRC Centre is a partnership between four leading universities (the Universities of Nottingham, Bristol, Cranfield and Manchester), the National Composites Centre and several leading companies. The EPSRC Centre provides world-class composites manufacturing facilities and expertise.
Ergomat delivers innovative safety solutions for the contemporary workplace. Our comprehensive ERGOMAT® product line includes a broad range of specialized ergonomic matting to match the unique requirements of every working environment. Our DuraStripe® brand, which was the industrial marketplace pioneer of durable peel-and-stick floor markings, continues to evolve and expand as the most flexible, versatile product for safety, 5S and Visual Workplace programs. Ergoperfect® ergonomic furniture completes our collection of health and safety enhancements for a variety of industrial and office applications.
ESI Group is a global supplier of end-to-end virtual prototyping software and solutions, incorporating the physics of materials for manufacturing industries. It provides virtual test applications and solutions for casting, composites and plastics, vibro-acoustics, electromagnetism, biomechanics and fluid dynamics, to realistically simulate a product’s behaviour during testing to fine-tune the manufacturing processes in accordance with desired product performance and to evaluate the environment’s impact on the product performance. ESI provides its products to various industries, including automotive, aeronautics, energy and defense among others.
The Electronics, Sensors, Photonics KTN is a Knowledge Transfer Network funded by the UK Government through the Technology Strategy Board. One of our key work programs is the promotion and support of the printed & plastic electronics community in the UK. We carry out these duties through a variety of knowledge exchange tools and activities including industry events, strategy workshops, training courses, international missions, seminars & tutorials. Activities cover the entire value chain, from basic science at universities through process development and manufacturing up to and including end user interaction with brand holders. The KTN is free to join and provides access to people and organisations across the whole ESP technology space.
ESTECO is a company founded in 1999 and established in the AREA Science Park in Trieste. It operates in the field of research and development of engineering technologies and is the creator of the multidisciplinary and multi-objective optimization software modeFRONTIER. Furthermore, ESTECO supports companies in terms of efficient use of simulation tools in designing new and perfecting existing products, as well as designers and researchers in acquiring new skills in the use of optimization tools.
The software modeFRONTIER is the core product of ESTECO, designed in such a way to enable its use in any discipline presenting input and output variables and a problem requiring optimization (objectives and constraints), as well as to be integrated with any CAE (Computer Aided Engineering) platform. modeFRONTIER assists the user at all design stages owing to its unique interface and process automation and helps him answer the question: “What is the best solution to my problem?” The software also has a series of tools for statistical analysis, decision-making and data visualization allowing the user to have a complete view of the concerned problem. In short, modeFRONTIER acts like a robot automatically performing numerical analyses and leading them in an intelligent way towards optimal solutions.
Stand: F196 – co-locating with ANSYS
Esterel Technologies, a wholly-owned subsidiary of ANSYS, Inc., is the leading provider of critical systems and software development solutions for the aerospace and defense. System and software engineers use Esterel SCADE® solutions to graphically design, verify, and automatically generate critical systems and software applications with high dependability requirements.
- SCADE System® – System Architecture Design
- SCADE Suite® – Control and Logic Application Development
- SCADE Display® – Display and HMI Development
- SCADE LifeCycle® - Application Lifecycle Management
- SCADE Solutions for ARINC 661 Compliant Systems – ARINC 661-compliant Avionics
SCADE has been qualified at the highest level of safety across six market segments by more than ten safety authorities worldwide.
ETPS specialise in programmable power supplies and test systems. Our wide product selection can cater for almost any power, voltage or current requirement you may have. Specific ranges include AC & DC Power Sources, Electronic Loads, DC-AC Inverters, Battery Chargers and High Voltage PSUs. Standard product platforms can also be modified by our design team to meet any unusual application requirements.
This year we will be launching our innovative range of high current Power Recycling DC Systems. The LAB-GSS-HC is available as 20kW or 32kW modules and can operate as either a DC Source or Electronic Load. This versatility allows performance and qualification testing of virtually any power consuming or power feeding device. This eliminates thermal issues associated with traditional heat dissipative Electronic Loads, while providing the added bonus of significantly lower electricity costs.
Engineers from the Composites Industry launched Euro-Projects Recruitment Ltd in 1996. It is now the leading recruitment consultancy, which organisations turn to for specialist engineering, technical, scientific, manufacturing, operations, QA, project management and sales professionals in the automotive, aerospace, defence, marine, manufacturing & process sectors. To discuss current or future hiring plans, or to propel your career in any of these sectors, visit us on stand 426 and talk to one of our industry experts. All visitors will receive a complimentary Guide to Recruitment including industry salary survey. Alternatively call us on 01530 833825 or visit www.europrojects.co.uk
Euroresins Europe Holding GmbH & Co. KG is Europe’s largest distributor of premium products for the composite industry and a fast growing European network of distribution companies operating in Benelux, UK, France, Spain, Italy, Germany, Switzerland, Sweden, Norway, Finland, Baltic States, Poland and Turkey.Euroresins offers premium products from leading principals such as DSM Composite Resins, BÜFA Gelcoat Plus, BÜFAtec machinery, PPG Fiber Glass, SAERTEX non-crimp fabrics, peroxides from Akzo Nobel and United Initiators, Alcan core materials, and 3B CFM.The Euroresins brand represents professionalism, premium product quality, technical expertise and reliable logistics. Euroresins is the premium one-stop-shop with a complete product range for composite applications.
Euroresins UK Ltd.
Cloister Way, Bridges Road
Cheshire CH65 4EL
Phone +44 151 3488800
Fax +44 151 3488806
Invensys Eurotherm is a global supplier of instrumentation, software and solutions for a diverse range of process control applications . Eurotherm have been providing engineered solutions for control and data management in multiple industries for more than 40 years.
Come and visit us on Stand C8 at Aero Engineering 2013 where we will be showcasing our new additions to our portfolio.
Increasing stiffness of a composites structure by means of sandwich construction in combination with low production cost are the up coming challenges. ROHACELL®, the PMI-based structural foam core, produced and globally marketed by Evonik, Germany, has been used in composites technology for more than 30 years. And it is by no surprise that ROHACELL® set new standards in the area of high-grade lightweight sandwich construction. ROHACELL®’s success can be attributed to the customers advantage, like:
• Excellent mechanical properties over a wide temperature range, even at low densities (32 kg/m³)
• High temperature resistance up to 220°C
• Unique compressive creep behavior for processing up to 190°C and 0.7 MPa
• Excellent dynamic strength
• Cell sizes that can be tailored for each processing method
As a special service of the ROHACELL® team, experienced engineers will be available for consultation at our booths. We do much more than merely exhibit our ROHACELL® products and applications. You’re welcome to discuss your specific problems at our booths and can expect to get solutions for your sandwich structure applications.
Phone +44 1536 529347
Fax +44 7788 581260
Bespoke cleaning and degreasing machines, EVT will be showing its range of hermetically sealed solvent cleaning and degreasing systems using chlorinated hydrocarbons (CHCs), hydrocarbons(HCs-AIII) or modified alcohols. With almost “no” solvent emissions an EVT system can provide Environmental protection whilst also utilising the excellent degreasing characteristics of solvents.
Exactaform are specialists in the design and manufacture of PCD cutting tools, primarily for composite machining. As the largest PCD manufacturer in the UK we are dedicated to providing the aerospace industry with the most cutting edge technologies. As leader in the race for ONE SHOT tooling, Exactaform are your ideal partner to tackle the most challenging of machining operations. Our primary focus is customer convenience, and we strive to produce the most competitive lead-times found anywhere in the market.
Exel Composites is a leading technology company that designs and manufactures composite profiles for demanding industrial applications.
Exel Composites products are manufactured using pultrusion, pullwinding and continuous lamination processes; which gives high levels of fibre reinforcement, high dimensional accuracy and excellent surface finish.
Profile shapes range from standard parts, such as tubes, through to complex designs for bespoke customer applications.
Fibre reinforcements include glass, carbon or aramid. Thermoset resins types include polyester, vinyl ester, acrylic, epoxy and phenolic; depending upon requirements such as mechanical properties, chemical resistance and fire performance.
With our extensive materials, processing and design expertise, we work closely with our customers to develop innovative composite solutions.
Expert is a long established and highly respected supplier of Assembly Tooling, Special Purpose Machines and Automation Products. We supply equipment to the Automotive, Aerospace, Machine Tool, Pharmaceutical, Plastic and Transport Industries. Expert is a privately owned company with an annual turnover in excess of £19 million and has facilities in the Midlands and North East.
Our services range from:
-Simulation – Robcad
-Design – Catia 24 seats
-Installation, commissioning and Pass off
We have expertise in:
-BIW and T&F tooling
-Prototype and production tooling
-Drive Line and Suspension
-Body In White
-Palletised Assembly Systems
We have experience in supplying direct to OEM’s, 1st and 2nd tier suppliers.
We are an expert digital marketing company based in Staffordshire. We provide bespoke website design, search engine optimization (SEO), email marketing, social media marketing and multilingual marketing in all these media. We have established a great reputation, which has been built up over 13 years. We are also ISO 9001 quality accredited.
The team at ExtraMile Communications Ltd, has been creating great looking websites and brilliant email marketing campaigns since April 2000. We’re a dynamic, dedicated group of varying ages, who get to grips with complex web and emailing projects, deal with multiple European languages and, most of all, are committed to giving you great service.
We use the best of web technologies to develop:
Websites – including e-commerce, social networks or content-managed systems as well as multilingual solutions. We continue to innovate and our latest exciting development is responsive design websites – a technology whereby the website configures itself, automagically, to match the environment in which it is being viewed.
Email marketing and multilingual email marketing – including all subscription management, templates, testing, sending and full reporting in languages from almost anywhere in the world
Social media – including integration of Facebook and Twitter into other online media, and other viral techniques. We also provide training services.
Search engine optimization – getting the best from your website by driving relevant traffic to your pages. SEO is important for any company that is serious about engagement with their audience.
Graphic design – We can completely overhaul your current identity, give it a fresh new look or utilise current branding across any marketing material.
Web hosting and domains – Our servers are hosted in the UK on our premium network and provide a robust, reliable service with all the features you need for any type of website hosting.
You may have been using online media for years, or you might never have considered it before: either way, we can help you drive your business forward and enter new markets. Learn more about our services and then come and see us on stand F1 for an assessment of your needs.
FAR-UK is a product and process design company of composite materials specialising in carbon fibre components. We are focussed on automotive design and manufacture. FAR is a recently formed SME whose staff have a combined experience of over 60 years in the composites and automotive industries. The company already has customers including automotive OEM and 1st tier suppliers. FAR offers three core processes: 1) Design of components in carbon fibre and the tooling and processes to manufacture them 2) Supply of tooling and validation of initial components from that tooling 3) Initiation of series production in-house or in a company selected by the customer We offer a revolutionary approach to lightweight structural composite components.
FARO offers coordinate measurement devices and software. Portable equipment from FARO permits high-precision 3D measurements and comparisons of parts and compound structures within production and quality assurance processes. The devices are used for inspecting components and assemblies, production planning, and inventory documentation, as well as for investigation and reconstruction of accident sites or crime scenes. Worldwide, approximately 9,500 customers are operating more than 20,000 installations of FARO measurement systems.
Fastener + Fixing Technology presents the latest fastener engineering concepts to designers, engineers and production managers. Through case studies, technical articles and news from leading fastener technology suppliers, it reinforces the critical value of integrating fastener technologies to the design process and adopting their intelligent use for in-place cost reduction, continuous product improvement, as well as safely and performance enhancement. Our editorial policy is to provide comprehensive, in-depth coverage of the latest fastener engineering concepts. We present content genuinely worthy of being read by industry professionals making critical fastening technology decisions.
Fenn Tool has established itself as a market leading independent distributor of specialist solid shank tooling and manufacturer of our own highly acclaimed range of self-manufactured FETOGA milling cutters.
Fenn Tool has an extensive team of Technical Sales Engineers with exceptional product knowledge, offering support directly to end users. This is backed up by our office based team offering full technical support for standard tooling and manufactured specials.
Fiberweb is a global manufacturer which supplies the composites industry with nonwoven and net products for veils, adhesive film supports and bleeder materials. Fiberweb has a strong history of creating innovative products, utilising a wide range of technologies to give unique loft, strength, flow and mechanical properties suitable for processing. Areas of experience include adhesive film production, pultrusion, filament winding and open and closed moulding processes. Fiberweb is committed to excellence in customer service and invests heavily in research and development to meet customer needs. Please visit stand F135 to find out more.
We provide a tailored manufacturing service to meet the most demanding outsourcing requirements for machined engineering plastic components.
Based across two UK manufacturing sites, we focus on responsiveness and flexibility and aim to help our customers improve their supply chain performance.
Our broad range of CNC technology covers sizes from less than 1mm to more than 2500mm in prototype through to high volume.
Materials expertise includes in-house processing of PTFE / TFM® from powder to part, unbiased guidance on material selection and help with component design using an extensive range of plastics including PEEK, Polyimide, Vespel®, PAI, PEI, Torlon®, Fluoropolymers, Nylon, POM, Acetal and many other engineering polymers.
COME AND SEE US ON STAND: F185 (Composites)
Fibrecore is the UK agent for CEL Components – one of the biggest European suppliers of honeycomb and foam cores for sandwich panels plus semi-finished sandwich panels. Via CEL, Fibrecore also offers Tipton-Goss prepreg machinery. The Tipton-Goss system offers the most cost-effective way into the lucrative prepreg production market. Fibrecore also supplies EMS Grilon and Griltex speciality copolymer fibres and powders, and represents industrial laminating firm Reliant in the UK.
Supporting media partner: D22
Fine Cut Advanced Engineering are 5 Axis machining specialists. Experts in high speed 3D machining of precision engineered parts, rapid prototypes, rotational mould tools, EPS mould tools and 3D Models.
Experienced in custom projects, concept to completion, including in-house design studio, cutting edge CAD software, 3.5m x 1.5m working area and vast experience of aluminium, resin and composite machining, we are perfectly positioned to deliver Precision Tooling to suit your needs.
If the highest quality tool is required with maximum accuracy and minimal flashing then Fine Cut Advanced Engineering can supply precision machined tooling for any requirement.
(Advanced Engineering Division)
Finishing Techniques Ltd is the UK’s leading supplier of deburring and polishing solutions, capable of surface finishing of metals, plastics & coatings down to 0.01Ra – even on large components. On the stand there will be an ECO disc finishing system, providing an opportunity to see wet process deburring/polishing firsthand, ideal for small components.
Also being demonstrated will be the GFM MikroCAD 3D non-contact measuring system, designed for high speed profile and roughness checking in a production environment, this works for a variety of materials, including soft structures which could be deformed during the measurement process.
With over 30 years of experience, we are able to offer sub-contract processing, including laser engraving.
Fischer Instrumentation (GB) Ltd is part of the multi-national Helmut Fischer GmbH, experts in coating thickness measurement, material analysis and micro hardness testing instrumentation. The comprehensive product range developed over 60 years takes Fischer into all areas of industry and research and extensive use of both the hand-held and desktop ranges is to be found in the automotive and aerospace industries. Fischer GB is well known for its highly responsive after sales service and maintenance programmes.
As part of Fives Group, CITCO custom manufactures diamond and polycrystalline cubic boron nitride (PCBN) cutting tools; diamond and cubic boron nitride (CBN) grinding wheels; and diamond dressing tools. As part of Fives Group, Gardner custom manufactures Disc Grinding Wheels, Cylinder Grinding Wheels, Centerless & Roll Grinding Wheels and Super Abrasive Grinding Wheels. In addition, Gardner also offers Vitrified Grinding wheels. Although these are primarily used in the automotive industry; the company provides equipment for customers in the aerospace, medical, energy and steel industries.
7605 Discovery Lane
Concord Township, Ohio 44077, USA
481 Gardner Street
South Beloit, Illinois 61080, USA
RESIN FLOOR FINISHES, FLOOR SCREEDS, UNDERFLOOR HEATING, CAR PARK DECKING AND ANTI-CORROSION COATINGS… Welcome to Flowcrete UK – the market-leading manufacturer of innovative industrial flooring products that are simply bursting with enhanced features to bring our clients the very best in performance flooring technology. Flowcrete’s resin floor finishes have been used extensively across the globe by many of the world’s largest automotive and aerospace companies to suit the variety of service conditions found in these demanding sectors including fuel, oil, heat, chemical and slip resistance. Speak to the Flowcrete team on stand 701 to see how a new resin floor finish can improve your working environment.
Fluid-Bag Ltd manufactures 900 and 1000 litre flexible container systems, which are perfectly suited for sensitive and high-viscous liquids, pastes or semi-solid products, such as high-viscous adhesive resins. The closed packaging system avoids the risk of air, particle or moisture contamination, which is essential when working with sensitive and reactive products. Fluid-Bag offers two flexible container solutions (IBC): Fluid-Bag Flexi (one-way) and Fluid-Bag Multi (multi-trip). Fluid-Bag also provides state of the art equipment for highly efficient discharge of high-viscous products, enabling important cost savings by reducing product residue and simplifying container handling.
Foam Techniques Ltd is the leading independent manufacturer of flexible solutions for a wide range of industries and applications. Our vast range includes, Filtration, Acoustic, Sealing and Gasketing, Thermal and Packaging materials which can be processed to meet your specific requirements. From our purpose built factory in Northamptonshire we offer a rapid response from enquiry to delivery, supplying customers both nationally and internationally. Using the latest technology we are confident that we are the flexible solution. Flexible products from flexible people, contact us today to gain access to a world of foam at The Home of Foam.
Foamotive are manufacturers and suppliers of precision moulded, cross-linked polyethylene foam components.
A subsidiary of the Palsiv Group, Foamotive have manufacturing facilities in both Israel and Romania.
As the major supplier of high volume technically moulded foam parts to OEM Automotive, Foamotive are key partners with VW, Audi, Seat and Opel as well as Tier 1 customers such as Magna Mirrors, Ficosa, SMR, Dr Schneider Kunstoff and others.
Our parts are produced by a unique – closed mould – Thermoforming process and are used in the automotive market as gaskets for external mirrors, NVH insulation damping for interior cabin as well as many under bonnet applications. Their blend of closed cell and versatile mechanical properties make them a choice material for design and use in a wide range of applications.
Our market leading Engineering, Design and Production facilities are directly complemented with current sales into Germany, France, Spain, Hungary, Poland, Slovak Republic, Mexico and the USA. We have direct sales and engineering support in key markets of Germany, UK and Spain.
For more information, go to: www.foamotive.com
FORMAPLEX is a dynamic manufacturing company experienced in supplying Tooling and Master Patterns to the Automotive, Aerospace and Motor Sport industries for Composite Part Manufacture.
With the ability and experience in creating tool designs from customer part data, and using leading edge 3 & 5 axis CNC machining technology (25 machines up to 5m bed size), dynamic work practices and unlimited 24/7 hours production in a modern purpose built manufacturing facility, FORMAPLEX proves as total service solution to the Composites Industry.
Dakota Business Park, Downley Road
Havant, Hampshire. PO9 2NJ
Tel: 02392 499276 Fax: 02392 499277
Sales Director – Andy Bone
Direct tel: 07900 221111
FORMAX is a leading global manufacturer of composite reinforcements, specialising in the production of lightweight carbon fibre multiaxials and highly engineered glass fibre and aramid fabrics. FORMAX’s goal is to deliver materials of the highest quality, specifically tailored for each individual customers application. Through continuous investment in research and development, and new technology, and by a philosophy of working alongside each customer, we believe that we can continue to make our customers products lighter, stronger and more cost effective. We supply materials to main areas of the composites industry such as Automotive, Motorsport, Marine, Wind Energy, Industrial and Sports goods. FORMAX’s willingness to manufacture new and innovative materials is legendary, while the facilities within its new research and development facility for analysing the performance of these new materials are second to none.
At Forresters, we provide clear, sensible and practical advice on intellectual property, including patents, trademarks, designs and copyright, in the UK and across the world. We take a collaborative approach with our clients, drawing on their knowledge to ensure that we understand what they want to achieve.
With over 40 years of experience and the skills of more than 800 competent employees Forteq offers know-how of functional plastics from gears and transmission systems to electronic/electric components and metal replacement. Customers choose Forteq to convert their ideas into tangible solutions for Automotive, Medical and Consumer products. They rely on our competences in mould tool engineering, plastic materials expertise and experience in processing components and assemblies of high quality and reliability. Forteq is a global company and has manufacturing plants in the UK, Switzerland, Czech Republic, USA, Italy and China.
Forward Composites Ltd offer an end to end composites solution from tooling and component design and manufacture through to complete project management. Amongst our current projects we are proud to announce that we are a partner in the prestigious Watchkeeper project.
Forward Swindon is responsible for economic development and regeneration in Swindon. Famous for it’s manufacturing heritage, Swindon is home to Honda, Intel, Johnson Matthey and BMW, and ranked amongst the top 10 most innovative towns in the UK. Swindon is a leader in Hydrogen technologies, with the Country’s first open-access hydrogen re-fuelling station and a strategy for hydrogen development throughout the Borough.
Forward Swindon offers a free service to make it easy for businesses to move, or expand operations in Swindon.
Freescale Semiconductor (NYSE: FSL) is a global leader in embedded processing solutions, providing industry leading products that are advancing the automotive, consumer, industrial and networking markets. From microprocessors and microcontrollers to sensors, analog integrated circuits and connectivity – our technologies are the foundation for the innovations that make our world greener, safer, healthier and more connected. Some of our key applications and end-markets include automotive safety, hybrid and all-electric vehicles, next generation wireless infrastructure, smart energy management, portable medical devices, consumer appliances and smart mobile devices. The company is based in Austin, Texas, and has design, research and development, manufacturing and sales operations around the world.
FUCHS is the world’s largest independent lubricant manufacturer. We research, develop and manufacture bespoke machining fluids; technology that is approved for use by leading manufacturers and available globally via the FUCHS organisation. We understand the unique challenges of aerospace machining and dedicate our expertise to ensuring our cutting fluids deliver competitive advantage to your production. FUCHS offers customers a full line supply service for all coolant and lubricant demands.
Fullerton (UK) LtdMore
Fullerton (UK) ltd, represent some of the leading Manufacturers of Cutting Tools from around the world.
The range encompasses Milling, Drilling, Threading, Micro-cutting Tools for an ever increasing range of applications.
Leading brands such as;
Fullerton Tool Company Inc (USA)
Zecha Micro Tooling (Germany)
C.P.T. Threading Solutions (Germany)
Vergnano Tapping Solutions (Italy)
Christian Kafanke MD
Unit 22, Queens Square Business Park,
Gazechim Composites UK is part of Gazechim Group a Europe wide specialist composites distributor offering top quality products and service second to none.
Our portfolio represents many of the leading products in the composites industry including:
- Glass Reinforcement
- Technical Glass Fabrics
- Glass Tissues
- Carbon fabrics and prepregs
- Core materials
- Resins / Gel coats
- Epoxy Resins
- Polyester and vinyl ester spraycores
Gerber Technology’s Composites and Automation division with its Virtek product line offers specialized technology solutions that meet the demands associated with the processing of composite materials. These include automation solutions for nesting, cutting, kitting, quality control and ply lay-up. Customers in the aerospace, automotive, marine, metal inspection and wind energy markets rely on Gerber’s best-in-class hardware and software solutions for increased manufacturing efficiencies.
Established in 1971 as a UK subsidiary for the German Gesipa Group, Gesipa Blind Riveting Systems Ltd. manufactures blind rivets, rivet nuts and nut studs of the highest possible standards, here in the UK. We operate from our factory base in Keighley, West Yorkshire.
- Blind Rivets, rivet nuts and rivet nut studs
- Specials designed for varied industry applications including automotive, construction, railway, white goods, electronics etc.
- Riveting tools from the revolutionary AccuBird, PowerBird and FireBird battery-powered portable tools through to pneumatic Taurus with process control and fully automatic riveting systems like GAV
- I S O 9001 and TS 16949-accredited service
Glas-Craft supplies a large range of dispense equipment, hand tools and ancillaries for the composites industries.
We are well known for high quality engineering with low cost of ownership.
Long trusted by companies requiring high standards of quality and reliability.
Many unique dispense solutions in the Composite, Foam and Polyurea market including bespoke systems.
Innovating GRPu (Glass-Reinforced Polyurethane)
• Dispense Systems
• Spray Systems
• Drum Heaters
• Laminating Rollers
GOM – Professional 3D optical metrology.
Optical metrology is today providing an alternative approach to traditional dimensional inspection tools. With no limits on component size, fast complete measurements enable parts to be thoroughly checked.
The GOM ATOS 3D scanner is developed for the dimensional control requirements of the manufacturing industry. Fast, accurate, GOM scans are now an established way of reducing product development times and ensuring highest quality components.
For material and component testing GOM Deformation products include digital image correlation and 3D point tracking. By measuring surface strain over large areas comprehensive results provide developers with the information they require.
Goplasticboxes.com will be showcasing for the first time its standardised range of KLT storage containers on Stand G71, Hall 5. Developed specifically with car manufacturers in mind for the storage and distribution of vehicle parts, Goplasticboxes.coms KLT containers conform to Europes VDA standards for the automotive industry. Also on display will be a range of Euro containers, and the companys complete pallet, container and lid system. Goplasticboxes.com offers the UKs most comprehensive range of plastic boxes available from stock more than 115 different containers, crates and trays and a variety of accessories, including dollies, lids and flooring.
Granta helps advanced engineering organizations to manage and apply critical data on materials – metals, composites, and plastics. We help these enterprises to capture and control their own materials data, to access the materials reference data that they need, and to use all of this data in making better materials decisions – for example, on materials selection or substitution during product design. We’ll be demonstrating our novel MI:Materials Gateway technology that enables you to find and apply materials data from directly within leading CAD, CAE, and PLM software. Development is driven in close collaboration with the Granta Consortia, which include top engineering enterprises such as Boeing, NASA, Rolls-Royce, GE-Aviation, Honeywell, and Eurocopter.
Graphtec Corporation of Japan have manufactured high quality test and measurement equipment since 1949, Our experience of more than 60 years has culminated in what we believe is he best data logging solutions available today. UK distributors Graphtec GB are based in Wrexham, North Wales, and our experienced sales engineers are happy to supply unbias advice as to the best solution for your application.
Greater Lincolnshire has become an important engineering centre and the GLLEP is committed to creating the right conditions for growth in this important sector.
The UK’s first purpose built engineering school for more than 20 years opened recently at the University of Lincoln giving access to industry focussed R&D and a skilled workforce.
Lincolnshire companies have strong business clusters in the sector particularly around design engineering, advanced materials and manufacturing.
Provider of structural optimization software, simulation and product design services for the Automotive, Motorsport, Aerospace, Marine, Defence and Wind Power Industries. GRM has a strong bias in composite optimization and advanced non-linear composite simulation including impact and damage modelling. Our optimisation tools are used by the majority of the Formula 1 teams for their laminate design and development.
Group Rhodes (which incorporates Chester Hydraulics, John Shaw, Fielding and Platt and Joseph Rhodes) has a long and successful track record in designing and manufacturing specialist machinery for the aerospace, automotive and composites industries. The Company is world renowned for its range of Super Plastic Forming and Diffusion Bonding Machinery; Composite Moulding Presses; Rubber Pad Presses; Three Point Bending Machinery; Hot Joggling Presses; Munition Presses; Expanding Presses; Aluminium Stretch Forming Presses; Dualform Presses; Autoclaves and Tube Bending Machinery. In 2010, Group Rhodes won the prestigious Queen’s Award for Enterprise: Innovation for it’s range of SPF/DB presses.
Grove Automotive Design is one of the UK’s leading designers of drivetrain systems. We specialise in all aspects of drive train development.
We have particular expertise in All Wheel Drive systems from power take off to final drive units.
Many of our projects involve adaptations or conversions of existing vehicles where creative design solutions are key to satisfying customer requirements
We believe we can offer creative and cost effective solutions to your design needs
“GTMA represents leading companies in precision engineering, rapid product development, metrology, precision machining and tooling technologies and is a focus for technology transfer and business support.
The GTMA provides procurement and supply chain initiatives, and our associated company the Manufacturing Resource Centre provides supply chain/engineering solutions to tier one manufacturing companies in the aerospace, automotive, medical, energy and marine sectors”.
Guhring Ltd, the UK division of one of the world’s leading manufacturers of rotary cutting tools offers extensive facilities for research and development, manufacture, service and support to the aerospace industry.
With the advances of composite, exotic and tougher materials Guhring can be considered as the optimum tooling partner to assist the aerospace industry to be at the forefront of machining technology whilst at the same time working to drive productivity costs down.
Gurit is a global leader in the development and manufacture of advanced composite materials. Gurit’s multinational engineering team includes 30 engineers specialising in composites, based in Europe, USA, and New Zealand, who have been involved in over 2000 large composite structures, over the last 30 years. Gurit have expertise in established markets and also in bringing advanced composites to new markets. Gurit’s engineering team are part of the wider technical group, which includes expertise in materials development, composite processing, testing and prototyping. This enables development of full composite solutions, from feasibility studies to design, analysis and optimisation of composite structures and onsite support.
Haas Group International is the largest supplier of chemicals and associated products. Working proactively with key suppliers, Haas Group International provide their customers access to innovative products and technologies required to support their businesses with engineering solutions and cost reductions.
This extensive range of products covers adhesives, sealants, tapes, lubricants, coatings, chemicals, composite materials and workshop consumables.
Providing an array of value-added services encompassing consignment inventory, managed stocks, vending solutions.
Haas Group International SCM Ltd
Tel +44 (0)1293 459 500
Fax + 44 (0)1293 459 600
For the automotive market, Hamamatsu Photonics has produced optical semiconductors for over 30 years, adapted to meet the market requirements and qualified accordingly (e.g. AEC-Q100). Vehicle manufacturers and suppliers trust the good performance and extremely high reliability of our products. The use of optical sensors for different applications in cars has increased drastically over recent years. Hamamatsu Photonics offers standard products and custom specific developments such as (avalanche) photodiodes and arrays, photo-ICs, CMOS image sensors, LEDs and other optical semiconductors.
HGF Patent and Trade Mark Attorneys together with sister firm HGF Law, is the fastest growing, full-service intellectual property firm in the UK. Engineering and Electronics specialists work across a wide range of technologies, including automotive, aerospace, defence and medical industries. The team advises on drafting and prosecuting patents as well as IP strategy, licensing, due diligence and litigation.
Hays is the UK’s leading specialist recruitment group and provider of services to the engineering sector, placing professionals into permanent, temporary and interim jobs. We recognise the importance of local knowledge and understand what you want from a recruiting partner. From automotive and manufacturing to civil, structural and electrical engineering, we have the expertise and reach to help you find the best talent. We work with a variety of established companies, large contractors and public sector employers throughout the UK. So whether you are looking for a contract or permanent job, we can find you the right role to develop your career.
The very best in data acquisition from HBM
On show from HBM will be a range of data acquisition systems. Based on standard, off-the-shelf products, they deliver the very best data quality and accuracy. Their reliability is second to none, ensuring retainment of all critical data, as well as traceability of test data. HBM systems are versatile and re-configurable, easy to use, set up and operate, and are among the leading cost-effective solutions available today in the automotive testing and test stands.
Hellermann Tyton Ltdwww.hellermanntyton.co.uk
Heraeus Noblelight GmbH with its headquarters in Hanau and with subsidiaries in the USA, Great Britain, France, China and Australia, is one of the technology- and market-leaders in the production of specialist light sources. In 2010, Heraeus Noblelight had an annual turnover of 98.9 Million € and employed 689 people worldwide. The organization develops, manufactures and markets infrared and ultraviolet emitters for applications in industrial manufacture, environmental protection, medicine and cosmetics, research, development and analytical measurement techniques.
Accelerate your performance with HP Workstations. In engineering, models are getting more detailed and software is getting more sophisticated. HP helps you stay ahead of the curve with a portfolio of workstations designed for today’s challenges. HP Workstations deliver the innovation, high performance, expandable memory capacities and extreme reliability you need to deliver projects in less time. HP also brings you high-resolution displays that help you see your work in vivid detail; hardware certification for a wide range of professional applications; and HP Performance Advisor, an HP exclusive tool for performance optimisation that helps you identify correct BIOS settings, drivers and application settings. Come and see us at stand H5.
Hexagon Metrology is part of the Hexagon AB Group and includes leading metrology brands such as Brown & Sharpe, CogniTens, DEA, Leica Geosystems (Metrology Division), Leitz, m&h, Optiv, PC-DMIS, QUINDOS, ROMER and TESA.
Hexagon Metrology empowers its customers to fully control manufacturing processes that rely on dimensional precision, ensuring that products manufactured precisely conform to the original product design.
High-Tech Engineering is a precision sub-contract machining company focused on customer satisfaction. Operating from a purpose built facility housing the latest equipment they offer a 24hr manufacturing service. With unrivalled success on SC 21 with a Bronze award in 2008 followed by 4 consecutive Silver awards the company has a sustained level of exceptional quality and delivery performance over a 5 year period and is now looking to expand.
High-Tech would like to hear from companies who can offer regular scheduled work and LTA’s. www.high-tech-eng.co.uk
HK Technologies represent Mitsubishi EDM – Electro Discharge Machines in the UK and Ireland. As the worlds leading manufacturer of wire cutting and die sinking machines Mitsubishi’s advanced technology ensures exceptional accuracy, productivity and ease of operation in a variety of industries such as aerospace, mould making, medical and motorsport. Mitsubishi also offer automation solutions and are pioneering wire cutting of CBN Grinding Wheels. Complimented by excellent applications and service support Mitsubishi / HK Technologies offer the complete solution to all EDM – Wire Cutting and Die Sinking requirements.
Full-automatic cleaning machines, aqueous and solvent based. Closed-loop systems with single or multiple working chamber versions Höckh bring an untouchable reputation for supplying high quality degreasing plants throughout the World for companies who value automation, high grade of cleaning, sparing solvent distillation and reduced energy costs. Höckh systems under work under vacuum in a closed-loop system and meet all legal rules including the Solvent Emissions Directive.
hofer powertrain, established in the 1980′s, is a privately owned, German automotive engineering consultancy employing over 400 specialists. hofer powertrain works with many of the world’s top automotive OEMs, Tier 1 suppliers and automotive technology centres providing the latest powertrain, e-mobility, transmission and control software solutions – from clean sheet to series production. hofer has a global reach with technical centres across Germany and in the UK (Warwick), Austria, Italy, the USA and China and has numerous designs of powertrain components in production.
50 years’ experience in the forming and machining of aluminium extrusions serving all industry sectors. We offer stretch forming, roll forming and flow forming techniques in house so have the solution to your bending requirements. Our CNC division can machine parts up to 12500mm in length with 5-axis capability giving us flexibility no matter what the size. A turnkey service is offered enabling us to help improve your supply chain.
Holding Company Composite is Russian a large-scale manufacturer of carbon fibre and carbon fibre-based fabrics and prepregs. Our products are used around the world in aerospace, wind energy, construction, transportation, shipbuilding, power industry, sporting goods, and medicine. Our carbon fibre products production facilities are located in Moscow, Elabuga, Saratov, Chelyabinsk and Dubna, Russia. In 2010 the company established an R&D Center to develop new products and improve the operational performance of existing production facilities. In 2011 a Nanotechnology Centre of Composites (NCC Russia) was created to provide comprehensive engineering support for customers. In 2013 the company will open significant new production facilities
Fully approved to BS EN 9100, ISO 9001:2008 & SC21 Bronze award holders, Hone-All Precision specialise in Deep Hole Boring, Deep Hole Drilling, CNC Turning, and CNC Honing up to 3 metres in length.
Continual investment and improvement combined with a commitment to excellent customer service, flexibility and absolute quality, contribute to our ongoing success within the Aerospace and Defence industries.
We’re precise about what we do – from start to perfect finish…
After the consolidation of three separate HORIBA companies in October, 2012; HORIBA UK now serves a One Company approach; providing research and test equipment for the full capabilities of all its segments. HORIBA UK manufactures and delivers instruments and systems for testing a huge range of applications in various fields.
We aim to help you make our environment a stronger and healthier place within:
Automotive Test Systems; engineering engine, driveline, brake, wind tunnel and emissions test systems.
Process & Environmental; providing total solutions for protection of the environment, like air pollution monitoring.
Medical; contributing to idea diagnostic systems for the support of daily medical care activities in hospitals.
Scientific; offering elemental analysis, forensics, Raman and water quality through advanced technologies.
Semiconductor; developing high-level solutions for the manufacture of solar batteries and LEDs.
We measure air. We measure efficiency. We measure water. We measure blood. We measure food.
Our contributions to the environment make a difference in our world of growing technology and testing regulations. With over 60 years’ of global experience and extensive in-house expertise, HORIBA’s product portfolio is dedicated to and adapted in order to meet our customer’s specific needs. Moreover, proven quality and trustworthy performance worldwide have established prevalent confidence in the HORIBA brand. We have one world; let’s look after it.
The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. HORIBA manufactures and sells automotive emission measurement systems, environmental measuring instruments, wide range of scientific analysers, and medical diagnostic analysers, and measuring equipment used in the semi-conductor industry. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand.
HTMS is a Belgian company specialized in the development and production of high tech metal seals. HTMS metal seals solve problems for the most severe applications, where the use of conventional sealing products is excluded due to temperature, pressure, radiation, permeability, fatigue, corrosion, required low fugitive emissions …
HTMS’ main products are metal O-rings, metal C-rings and oysterseals.
Sizes from 0.79 to 12.70 mm section and diameters up to +3 m
Materials: Inconel 718/625, Elgiloy, Nimonic
In-house plating capabilities include silver, nickel, gold, and tin, PTFE coating is outsourced
HTMS is ISO 9001, ISO 14001 and EN 9100 certified.
Hutchinson Stop-choc is a leading manufacturer of advanced vibration and shock protection systems, light-weight racking for military vehicles & aircraft applications and illuminated display control panels for aircraft cockpits, military vehicles, naval applications and simulators. Hutchinson Stop-choc are the sole UK distributor of the EDAK range of light weight aluminium transit cases.
Hutchinson companies: BARRY CONTROLS, CLAROPAN, ESPA, HUTCHINSON, JEHIER, JPR, KAEFER, LJF, LJF STILLMAN, MARQUEZ, PAULSTRA, STOP-CHOC, STRATIVER, VIBRACHOC
The High Value Manufacturing Catapult, set up and overseen by the Technology Strategy Board to accelerate the commercialisation of new and emerging technologies, provides an integrated capability and embraces all forms of manufacture using metals and composites, in addition to process manufacturing technologies and bio-processing. It consists of seven partners; Advanced Forming Research Centre (AFRC), Advanced Manufacturing Research Centre (AMRC), Centre for Process Innovation (CPI), Manufacturing Technology Centre (MTC), National Composites Centre (NCC), Nuclear AMRC, and WMG.
HSP is a UK based manufacturer of specialist components for hydraulic systems. The company supplies equipment to enable the efficient testing, measurement and maintenance of fluid power systems and also manufactures a range of niche fluid power system components. The hydraulic test equipment enables pressure, temperature and fluid samples to be measured from a single common test point and these points can be installed at any location in the system. System components manufactured by HSP include check valves, gauge protection valves, relief valves and flow control valves. This are supplied in a conventional form and also as cartridge valves.
Hydrotechnik UK Ltd is a leading test and measurement equipment distributor for Hydraulic, Process, Offshore and Municipal industries.
We offer a huge range of Minimess Test Points, Adaptors, Microbore high pressure hose assemblies, pressure gauges & kits, measurement sensors, data acquisition devices, calibration, repair and testing services.
Flowtechnik is a subsidiary of Hydrotechnik UK and has a variety of flow meters, process measurement sensors & instrumentation to suit a wide range of industries.
Visit us on stand G153 for special show offers!
HYLOMAR® Limited manufacture a wide range of high performance sealants & adhesives for the global automotive, aerospace, white goods, power generation, electronics and engineering industries. Products include: HYLO®BOND, HYLO®CLEAN, HYLO®FIX, HYLO®FLEX, HYLO®GLUE, HYLO®GRIP, HYLOMAR®, HYLOSEAL, HYLOLOC, HYLOSIL® Unlike many sealants & adhesives companies, HYLOMAR® Limited actually manufacture and can develop products to customer requirements. All commercially viable sealing and/or bonding projects considered.
Increasingly strict environmental regulations affecting the cleaning of parts have provided us with the motivation to provide solutions that satisfy both market requirements and our the environment. We have drawn on both extensive experience and new ideas, the result being a range of compact cleaning systems with state-of-the-art patented process technology.
IDAC is an approved ANSYS re-seller and a Computer-Aided Engineering (CAE) Consultancy, providing customers with advanced analysis capabilities in Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD). IDAC delivers analysis expertise in all fields, from simple structural problems to complex multiphysics simulations. IDAC together with its clients, manages, executes and delivers complete engineering solutions on time and on budget. IDAC also offers ANSYS training for engineers, in all aspects of ANSYS.
Leading polymer specialist, igus UK, will be showcasing its new high performance tribo-polymer bearings, energy chains and cables at Advanced Engineering Show, on stand G101. Visitors to the stand will be able to see live demonstrations of its industry-leading maintenance-free products including new stock plates and e-spool cable management system. Visitors will also have the opportunity of meeting the polymer experts to learn how to optimise processes and reduce costs through innovative use of plastic components.
The Imetrum Video Gauge provides state of the art resolution and accuracy for non contact precision strain and extensometer measurements. Quick and easy set up enables the system to make real time strain, displacement, extension, rotation and Poissons Ratio measurements on Composites Rubbers Polymers and Metals.
Simultaneous strain and displacement measurements from multiple faces of a sample are complemented by the ability to post process a video file previously saved by the system or from a high speed camera.
The Video Gauge has traceable calibration to BS EN ISO 9513:2002 class 0.5 and can measure modulus and elongation on specimens ranging from 25mm (standard dogbone) to individual carbon fibres less than 10 microns in diameter.
IMSM are leading ISO specialists, operating on a fixed fee and trouble free basis, supporting companies with tangible business growth and competitiveness. IMSM are recognised as industry leaders since 1994, serving an international client base, across 6 continents and operating in 18 different countries.
IMSM promotes success through the globally recognised international ISO business credentials, satisfying the expanding quality focused engineering market. Supporting companies of all sizes and sectors developing business relationships built on integrity and results.
In2grate Business Solutions provides MRP, ERP and PLM software solutions to help manufacturing companies to grow their business and remain competitive. In2grate is one of the few UK Gold Partners for Microsoft Dynamics NAV, a Master Affiliate for Infor XA and the sole supplier in Europe for JOBSCOPE ERP. With more than 40 years’ experience our clients include Hamilton Sundstrand, Nash Mechanical Seals, Park Air and Cobble Manufacturing.
High quality testing solutions from IncoTest
Incotest Materials Testing Service, based in Hereford, UK, is one of Europe’s leading independent UKAS and NADCAP approved Test House.
From purpose built facilities we are able to provide high quality, cost effective materials testing from some of the best equipped facilities in the world, supplying high integrity testing data at competitive prices to clients in the automotive, aerospace, chemical, nuclear and offshore sectors
Aerospace engineered coatings
Indestructible Paint has been inventing and manufacturing specialist coatings for aeroengines for nearly 30 years.
A tier 1 supplier to Rolls Royce, we also supply coatings to Pratt & Whitney US ; Canada; GE; Turbomeca; BMW Rolls Royce ; ITP; and many others
Experience with producing coatings for lightweight, high temperature, composites and exotic metals including titanium, magnesium, aluminium etc This gives us the ability to provide high tech solutions to aero engine coating problems. Including Dry Film Lubricants; intumescents ; sacrificial coatings and many others
These are often applied by specialist applicators.
ITC are the leading UK manufacturer, modifier, re-grinder and distributor of precision round cutting tools in both HSS and carbide. In addition to possessing one of the most modern and well equipped grinding facilities in the UK, with CNC grinding machines from Walter, Rollamatic, Schneeberger, Anca and Deckel, ITC is also sole UK stockist and approved re-grinder of cutting tools from Widia Hanita and Metal Removal (USA).
Industrial Tooling Corporation Ltd.
Lichfield Road Industrial Estate
Tel 01827 304500
Fax 01827 304501
Contact Peter Graves
Instron is a leading provider of testing equipment for the material and structural testing markets. Instron’s products are used to test the mechanical properties and performances of various materials, components and structures in a wide array of environments. Additionally, Instron offers a broad range of service capabilities, including assistance with laboratory management, calibration expertise and customer training.
Interface Force Measurements are specialist in Force, Multi Axis, Torque and Pressure measurement solutions with a strong belief in supplying the best solutions possible.
This belief is backed by the products we supply which include:
Load Cells, multi axis devices and torque measurement devices from leading manufacturers, Interface Inc and AMTI: Pressure sensors, transducers and pressure mapping solutions from Dynisco- Viatran and XSensor Technology Corp.
These products are back by a quality of pre and post sales support which is second to none.
For more information vist;
Intrinsys is a leading supplier of PLM software; CATIA, ENOVIA, SIMULIA and 3DVIA along with the associated services. The business supports a number of leading customers across a wide range of industries, with particular focus on the application of composite engineering. Intrinsys uniquely combines the supply of CATIA composite and Abaqus software with a thriving engineering business providing engineering design, structural analysis and manufacture of composite components.
The strength of intrinsys is the quality of its engineers who have both detailed engineering expertise and an extensive understanding of the PLM solutions. When combined with a culture of quality customer service support, these attributes have seen the company grow in both size and capability with the client base spread as far as North America and the Far East.
Invest Black Country is the Inward Investment team for the Black Country, covering Dudley, Sandwell, Walsall and Wolverhampton in the heart of England. Home to 1 million people and 33,000 businesses, and with an economy generating £17bn every year the Black Country is the place to be. With the largest cluster of High Value Engineering and Manufacturing Companies in the country and the location for the £750m new Engine Plant for Jaguar Land Rover, the Black Country is changing. Benefitting from a superb location, the Black Country also has the most successful Enterprise Zone in the country. Contact Invest Black Country for details of how we can help your company relocate to the most enviable business destination in the UK.
Ipeco Composites – a division of Ipeco Holdings Limited, has a long-standing reputation for expertise and innovation in the design, development and production of high performance structures utilising both metallic and advanced composite materials.
Covering a wide range of markets from aerospace and defence to medical and industrial, our capabilities include autoclave moulding, CNC machining, assembly and inspection.
We have experience of all the prime thermosetting matrices and fibre reinforcements.
Improve your Advanced Quality Manufacturing Process by 75%
IPI Solutions Ltd is a leading provider in Aerospace, Automotive, Medical & Defence sectors for process improvement software to reduce the burden of the quality reporting process, from a single site to a whole supply chain. The range of software by IPI enables high technology organisations to maximise their profitability by increasing productivity, improving quality and reducing lead times.
VIPI SQL Our latest platform allows for all your process data to visibly come alive
VisualFAIR Has revolutionised the AS9102 FAI reporting for Aerospace customers worldwide, with typical savings in excess of 75%.
VisualPPAP Enables the preparation & management of your PPAP process, whilst generating the necessary customer documentation. Utilising our SQL version enables visual management of your PPAP elements to be made in real time.
Visual CMM Directly imports data from any type of CMM providing the output is in some form of TXT, CSV, XLS, XMS.
Visual BOM Has the ability to import a Bill of materials from any MRP/ERP system such as SAP & uniquely identify differences between configurations & revisions
Visual FMEA A simple powerful way to create your Failure Modes and Effects Analysis reports, which is intuitive with branch creation of multiple cause and effects with associated detection methods and RPN’s risk priority numbers.
Visual MID Delivers management KPI’s that drive process behaviour & conformance. Visualise each element within your process & throughout your extended supply chain. This can be customised to analyse specific management data from inside a SQL database.
Tel: 01623 272500
Isograph is one of the world’s leading companies in the development and provision of integrated Reliability, Availability, Maintainability and Safety software products. Our products are well proven in use at over 7000 sites worldwide where they are used on many high profile projects. Please visit our stand to discuss how our Availability Workbench software can enable you to optimise your maintenance plan to minimise downtime and reduce costs. Availability Workbench is integrated with SAP PM, Maximo and Ellipse. For conducting ISO26262 safety studies our Reliability Workbench software is an integrated environment in which Fault Tree Analysis, FMECA, failure rate prediction and Reliability Block Diagram are combined.
Co-locating with JR Technology Limited
ISOJET EQUIPEMENTS, provide specialist equipment and expertise for Resin Transfer Moulding (RTM). As one of the pioneers in their field ISOJET EQUIPEMENTS have a wealth of RTM experience and apart from supply of standard machines provide advice and equipment specially designed to suit specific applications ranging from multi component injection machines to simple resin pumps. ISOJET EQUIPEMENTS commission all new machines and give training to new operatives and provide a full maintenance back up service.
ISOJET EQUIPEMENTS machines are well recognised and are in use in many industries including aerospace, wind energy, research establishments etc.
ITI TranscenData is your central source for CAD Data Exchange and PLM Integration Solutions. Since 1985 we have partnered with the leading CAD/CAM/CAE/PLM vendors to assemble an unparalleled suite of software products and related services – all aimed at eliminating the non-value-added time and costs associated with reusing product data, and maintaining data integrity and value. ITI TranscenData’s solutions include CADfix, Proficiency, DrawtoPMI, CADIQ and DEXcenter and are widely deployed in the global aerospace, automotive, consumer goods and electronics industries. Included among ITI TranscenData’s customers are Airbus, BAE Systems, Boeing, EADS, General Dynamics, Honeywell, Lockheed Martin, NASA, Pratt & Whitney and Snecma.
ITW Delfast is part of the Global Fastener Group within ITW (Illinois Tool Works) a Fortune 100 company based in Chicago.
In the UK we supply a range of innovative engineered fasteners in a variety of plastics to the Automotive Industry.
These are manufactured at our facility in Basingstoke.
Our operation has accreditation to ISO.TS16949 – ISO 14001 and we are working toward ISO 18001.
We design and manufacture innovative fastening and metal replacement solutions for all areas of the vehicle, using the latest energy efficient injection moulding machines.
6 axis robotics and PLC controlled automation is utilised for assembly and product transfer operations.
Our team in Basingstoke consists of 32 people, whilst our sales office in Coventry has 3 dedicated project Managers.
ITW Delfast provides fastening solutions to Jaguar Land Rover, Nissan, Mini and many of the Tier 1 suppliers.
Non-contact position and displacement measurement using inductive, capacitive, optical and laser technologies. Ranges from 50µm to 500m, resolution to 0.01 nanometre, frequency response to 200KHz and up to 850 degC.
Loadcells for tension and compression forces – miniature and fatigue rated. Custom designed strain gauged bolts and clevis pins for force measurement.
Ixthus provide full technical support for design, installation and calibration to R&D, testing, quality control and production areas.
Extensive capital investment in J A Harrison’s dedicated PTFE and Engineering Plastics facility gives us a complete in-house capability to produce a wide range of PTFE and Engineering Plastics components, as well as semi-finished billets.
Our polymers are purchased strictly from world-recognised manufacturers and include grades such as virgin, glass, carbon and bronze filled.
We can produce both large and small quantities of machined components; these typically include PTFE envelopes, valve seats, bellows, chevron sets and diaphragms.
In addition, we now machine PEEK, Acetal, Nylon and many other Engineering Plastics. Furthermore we can now compression mould PEEK to produce thin wall tubes.
J R TECHNOLOGY are composite production, test & repair specialists. As an ISO9001:2008 registered organisation, we provide equipment for NDT, manufacture & rectification of bonded parts
Products & services include workshop tools, processing plant, consumables & fittings. Our range of temperature controllers & portable hot bonders complement the IR lamps, flexible rubber heater mats & other heating systems we supply. Damage mapping equipment comprises the newly updated Woodpecker with XY plotter & moisture monitors
JRTL are the newly appointed UK sales & service centre for ISOJET’s resin transfer moulding injection machines
Having many approvals customers include: aerospace, military, marine, civil, automotive & sports industries.
JAM are true specialists in providing recruitment solutions to engineering and manufacturing companies and have particular expertise in the defence and aerospace, energy, transport, electronics and software sectors.
With access to the best candidates in the industry, including thousands of security cleared candidates, you can rely on JAM to relieve your recruitment stress and find the best person for your business. JAM’s track record speaks for itself with over 7000 people placed.
Independent Material and product testing service-
UKAS Accreditation, ISO9001:2008 Certification, ISO17025 Certification
Serving the manufacturing and processing industries
Structural, Thermal, Environmental, biological, physical and flammability
JEC is the largest composites industry organization in the world with a network of 250,000 professionals. JEC promotes composite materials worldwide and expands composites markets by providing global and local networking as well as information services through the JEC COMPOSITES Shows, Conferences, Innovation Programmes & Awards in Europe (Paris), Asia (Singapore) and America (Boston), the JEC COMPOSITES Magazine, Technical publications and Web portal: wwwjeccomposites.com Next JEC event: JEC EUROPE Show: 11 – 13 March 2014 in Paris
Since 1986 JETCAM has developed and distributed its award-winning Expert CAM and nesting system to over 70 countries. We provide savings in three key areas – programming time, machine runtime and material savings. At the show we will also be demonstrating our Material Life Management (MLM) software, which provides full traceability of material life, from roll to ply to finished part. Ask us to demonstrate how quickly JETCAM can deliver a return on your investment.
‘Modern Materials Technology’
John Burn is one of the UK’s largest distributor of advanced prototyping, tooling and composite materials. In partnership with Sika® Tooling & Composites GmbH, one of the most recognised global leaders in the manufacture of specialty chemicals, we are able to offer UK customers an extensive range of composite epoxy systems for mould making and parts production. All of our epoxy systems have the Germanischer Lloyd approval and the new CR122 is LBA approved for the construction of gliders and motor gliders.
For more information go to our website www.johnburn.co.uk
The Junair name is synonymous with innovation in spray booth development, providing solutions that deliver energy-savings, higher productivity, enhanced performance and, ultimately, increased profitability for our customers. Junair Spraybooths are the market leader in spray booth technology producing high quality spray booths manufactured in the UK to exacting standards. Junair supply spray booths , Ovens and ancillary equipment to the Automotive, Commercial Vehicle, Aerospace and Industrial markets.
We are a subcontract precision engineering firm based in the North West of England. We are a leading provider of CNC machined components produced using the latest CNC & CAD/CAM technology. In addition we can also build special purpose machinery, jigs & tooling to suit a customer’s individual requirements. Our flexible approach allows us to be able to cater for a one off manufactured item through to large batch production. We work within numerous industries including motorsport, food production & textile manufacturing.
For over 60 years KARL STORZ has built a reputation and name synonymous with quality, innovation and technology.
As a manufacturer of Remote Visual Inspection equipment with over 400 national and international patents, KARL STORZ sets the standard for quality.
Innovation is one of our key foundations and we are proud to offer to the Aviation Industry the unique Multipoint Laser Measuring System incorporated into our videoendoscopes. This system provides 99% accuracy in all viewing conditions (linear, area and depth dimensions) without the requirement to alternate tips, providing you with the accurate information that you need to make critical decisions.
KDPES is a privately owned consultancy, design and manufacturing facility established in 1972 based in Gamlingay near Sandy in Bedfordshire. We offer a broad based range of electronic and electrical design, development, test, calibration and repair services to customers spanning the Aerospace, Defence and Transportation industries as well as the General Industrial and Commercial markets. KDPES is a specialist in the design of instrumentation and system integration solutions. We are the UK distributor for the Meggitt Sensorex product line which comprises LVDTs, RVDTs, Inclinometers, Gyros, Accelerometers, IMUs, Shock Recorders and ASICs.
Kenard is an established tier 1 supplier to a number of major OEM organisations within the aerospace industry. With a focus on the role of subcontract precision engineering as a critical element of the supply chain, we provide a complete manufacturing service that supports customers from the product development stage through full production to final assembly. Kenard is fully certified and compliant with AS9100 across its two manufacturing facilities.
Kestrel Technologies Ltdwww.kestreltech.co.uk
KIMBERLY-CLARK PROFESSIONAL* is changing the conversation we are having with our customers. We don’t just make exceptional products . . . we create EXCEPTIONAL WORKPLACES for our customers and help their employees become healthier, safer and more productive. The Efficient Workplace programme helps customers drive out waste using LEAN principles and helping you become more efficient. We have already helped customers in the aerospace industry reduce disposal costs by £80,000 and reduce solvent consumption by 30%. Visit us at Stand E62 to see how we can help your business by more efficient.
The Swiss-based Kistler Group is a leading global supplier of dynamic measurement technology for pressure, force, torque and acceleration. Kistler’s technology is used to analyse physical processes, control industrial processes and optimize product quality. Kistler Instruments will be showing its NCF electromechanical servo-press systems and the maXYmos process monitoring and control system together with a range of piezoelectric sensors. The NCF actuators use integrated sensor technology and powerful force-displacement evaluation for complete process monitoring and documentation of all measurement results. The maXYmos X-Y process monitors provide a flexible monitoring and control solution for many manufacturing applications.
The KraussMaffei product brand is internationally recognized for its groundbreaking, multitechnology system and process solutions for injection and reaction molding technology and factory automation. With its standalone, modular or standardized machinery and systems, and a wide, customizable service offering, KraussMaffei is a full-system partner for customers in many industry sectors. KraussMaffei bundles many decades of engineering expertise in plastics machinery and is headquartered in Munich, Germany.
Kubtec X-ray is a leading manufacturer of high quality digital X-ray imaging systems for non-destructive testing. Our versatile and expanded product lines include: digital cabinet X-ray systems, flat panel detectors, non-isotope-based irradiators, portable X-ray units, and conveyorized X-ray machines for high volume inspection.
Labcell Ltd was formed in 1992 with the objective to supply specialist instrumentation to carry out difficult measurement and analysis tasks quickly and easily. Labcell manufactures, markets and supports a range of engine test instrumentation suitable for dynamometer and in-vehicle use plus a variety of general industrial and laboratory instruments. Applications include, Flowmetering, Engine Air Intake and Blow-By monitoring, Air to Fuel Ratio, Combustion Analysis, Pressure and Temperature monitoring.
We offer Toolmaking & Precision Engineering Services as well as Prototype Engineering & Component Manufacture. Accredited to BS EN ISO9001:2008
We utilise our engineering expertise to assist customers, to design and develop new tooling and prototypes to meet their precise specification requirements. We offer a full hands on fast-track supply service with a full CAD/CAM support office manufacturing from customer electronic files via our CAD/CAM software to our networked CNC machines, we specialise in 2,3,4 & 5-Axis 3D CNC milling & driven tooling CNC turning, plus spark erosion, mould polishing, fitting etc.
Strict non-disclosure & confidentiality undertaking
In~F1/Motor Sports, Medical, Automotive, Aeronautical, Marine & Defence
The austrian company Langzauner GmbH (www.langzauner.at) exists since 1924.
Quality, flexibility and customer orientation are the main topics in Langzauner’s philosophy.
The Austrian press manufacturer is well known as a reliable, high competent partner for the composite industry.
Automation, aviation, sports and many more!
The product range reaches from small laboratory presses up to large RTM- and moulding presses.
Co-locating with CD (UK) Ltd on STAND: B141
For more than 25 years, LAP has developed and manufactured laser-based systems for high-precision contour projection in industrial and medical applications. LAP laser projection systems generate contours true to scale from CAD data. The easily visible red or green laser lines are used to position and align products or components. An important field of application is the manufacture of high-tech carbon fiber components in the aviation industry.
Laser Lines Limited will be demonstrating the latest FDM (Fused Deposition Modelling) 3D Printing Technology live on the stand. Come and visualise the potential first hand.
In addition Laser Lines will be highlighting successful applications including soluble cores for composite part manufacture, end use parts, jigs, fixture and assembly aids, built utilising the high end FORTUS 3D Production Systems. Including parts built in the new flight approved ULTEM 9085 material.
Laser Projection Technologies (LPT) is the leading manufacturer of the fastest, most accurate and longest range 3D laser-guided assembly and verification templating solutions in the world (6-50 ft.). LPT’s 3D laser templating systems project a glowing image of parts, components and/or location points for operators to utilize to improve cycle time and quality. With over 1,200 systems deployed worldwide, LPT’s laser projection solutions are extensively used throughout the aerospace, automotive, defense, composites, industrial manufacturing, and maritime industries
- Aeronautics / Aerospace
- Buses & Trucks
- Construction / Building
- Industrial Equipment
- Marine / Boatbuilding
- Other sector
- Wind Energy
- Contact Moulding (Hand lay-up)
- Fiber placement
- Other Processing Method
- Pre-preg Lay-Up
LPE is a leading Rapid Prototyping and Additive Manufacturing bureau with over 20 years’ experience working with the Automotive and Aerospace industry. Offering the very latest in Additive Manufacturing technologies LPE is an ISO 9001 and ISO 13485 approved supplier.
With insider knowledge of the Aerospace industry we know the importance of finding the right material for each individual project, from wind tunnel testing, to lightweight high performance components and under bonnet applications.
Lavender International NDT provides quality training programmes to the
Non-destructive Testing (NDT) sector. We are accredited by the British Institute of
Non-destructive Testing (BINDT) to their Trainers’ Accreditation programme and by Investors in People as well as a number of employer based programmes.
We provide training and exams in Magnetic, Penetrant, Visual, Ultrasonics, including Time of Flight Diffraction and Phased Arrays, Eddy Current and Radiography (including Radiation Safety).
Leco provides premium brand laboratory instrumentation. Typical analysers would be Hydrogen, Oxygen, Nitrogen, Carbon and Sulphur in metals analysing down to precise sub ppm levels. Leco also have optical emmission spectrometers for full element analysis that can also measure surface treatments and coatings to micron levels. In addition we have a full range of metallographic preparation and hardness testing equipment both for manual and automatic operation. Recognised market leader.
Lectra is the world leader in integrated technology solutions dedicated to industries using soft materials— composites, glass fibre, industrial fabrics, textiles and leather. Lectra designs, develops, manufactures and supplies the global composites marketplace with industry specific 3D & 2D CAD and nesting software solutions that support Lectra’s comprehensive range of automated cutting technology. As the world leader in this field, Lectra partners with the world’s most prestigious organisations as they manufacture composite and glass fibre structures for use in Aerospace, Wind Energy, Marine, Automotive, Auto-sport, Defence and PPE sectors. Lectra also delivers industry expertise and consultancy services, training and dedicated support to ensure optimisation of client’s solutions and to protect investments
Asset labels, instruction labels, vehicle legal lettering, continuous improvement labelling; equipment ID and rating plates; small data labels; shadow boards; labels incorporating 2D barcodes; electrical marking; safety signs and specialist labels can be produced instantly and economically with a Lighthouse sign and label systems. Lighthouse sign and label systems are used extensively, by vehicle manufacturers, operators, converters and assemblers throughout the UK including Airbus, Cummins Engines, Ford Motor Company and many more. Visit our stand to see the systems in operation, and discover how to achieve substantial operational improvements as well as cost savings with Lighthouse systems.
Lipco was formed in 1980 and provides a highly skilled precision engineering service to
Tier One companies within Aerospace, Defence, Oil and Gas, Automotive, Medical and
Vacuum Industry sectors.
Our capabilities include CAD, CNC milling ( 3, 4 and 5 axis), CNC turning, CNC grinding,
welding, assembly and test.
Some of the projects we are already involved with are;
Eurofighter; Boeing787 Dreamliner; and Airbus A380, A350 & A320 neo.
LMS, A Siemens Business, is an engineering company that provides software and services for use in Acoustics, Vibration, Durability and Systems Simulation. With a portfolio of products for test data acquisition and design simulation, LMS help manufacturing companies deliver quality products to market faster.
LMS, A Siemens Bsiness
LMT UK Ltd is part of the international LMT Group whose range of products and services include precision tools and cutting materials for the most diverse applications in cutting and non-cutting processing.
The sales team at LMT UK specialize on specific applications and processes – from gear-cutting, milling, turning, drilling, reaming, thread-cutting and rolling to mould and die making, composites machining, metallurgy, heavy-duty cutting and the machining of automotive components
STAND E7: Loughborough College was established in 1909 and we are proud of our long standing reputation as an institution providing excellent levels of high quality teaching and training. An extensive range of Further and Higher Education courses are available, including vocational programmes, apprenticeships and professional qualifications, providing learning opportunities for every individual.
Starting in September 2013, Loughborough College in partnership with the National Space Centre, have developed a brand new Higher Apprenticeship that will introduce people to Space Engineering. Our training programmes are designed with the employer in mind and with nearly 200 Apprenticeship job roles, from mechanical manufacturing engineers to engineering technicians, can be tailored to meet the needs of your business.
Our Engineering and Space Engineering Apprenticeships will allow you to attract and train a keen and willing employee within a specific job role, whilst Loughborough College will provide that all-important academic training alongside.
Supporting Media Partner:
Lucintel is a premier global market research and management-consulting firm that creates your equation for growth, whether you need to understand market dynamics, identify new opportunities or increase your profitability. Lucintel’s broad scope of services help you plan your growth, in not only the markets you should pursue, but also the technology and strategy required for success. For more than 14 years, our industry knowledge and expertise has helped thousands of clients create the equation for measurable results. Let us create an equation for you that meet your goals.
Luna develops sensing technology and manufactures instruments that provide precise, distributed temperature and strain measurement to enhance structural design, manufacturing and testing. Luna offers the ultimate in sensing solutions with industry-leading, ultra-high resolution distributed sensing with thousands of sensing points.
Macfarlane Packaging is a leading UK company specialising in the design, manufacture and assembly of bespoke packaging for the protection of valuable and fragile products in both storage and transit.
We use leading 3D design software, SolidWorks, an extensive range of packaging materials and a variety of manufacturing and assembly processes to:
- Deliver enhanced levels of protection for your products
- Help to reduce your packaging and transport costs
- Eliminate excess packaging and reduce waste
- Use sustainable materials wherever possible.
- Make packaging easier to use by freeing up labour and storage space for more productive use.
Come and find us at stand G112
Magnum Venus Products Europe Limited was established in 1988 to serve the needs of the growing composite market. Our factory is conveniently located in the Midlands, which gives us easy access to all parts of the United Kingdom.
We provide equipment and materials for the composites industry in the UK & Ireland and many overseas manufacturing facilities. Our highly trained and experienced technical personnel support the equipment, processes and materials we supply.
Uniquely, we have experience in manufacturing which allows us to provide full technical assistance in all aspects of the production process through a hands on training approach.
We are continually striving to provide our customers with new technology with the support of our major suppliers.
MAKA’s advanced solutions include Carbon Dust Protection & MTB cutter lubrication & cooling, to increase tool life & make high feed-rates practicable.
The UK subsidiary provides after-sales support and project management to guarantee productive, robust and fully integrated solutions, with strong emphasis on energy efficiency, productivity, accuracy & safety.
The company (130 staff, 7 strong UK support team, € 20+ m sales,) is focused on service: the foundation of current & future business. NC Engineers will be on-hand to discuss your specific service & production requirements.
Design and development engineers with facilities for prototype and low volume manufacture. MarchantCain thrives on providing innovative solutions for a range of engineering challenges across all industrial applications, specialising in mechatronic systems.
‘Marineware is a leading provider of high performance coatings and composite materials, bringing innovative and cost effective solutions to many of the world’s most demanding markets, from renewable energy to marine, industrial and automotive.
As a composite supplier to household names in the marine industry and the main European distributors for Durepox , Marineware are the first stop for performance Clear Coats and advanced Composite technology.
Between the Technical Sales Team and the highly experienced Customer Services Team, Marineware have a huge depth of knowledge and supplier resources to offer help and advice throughout their composites and coatings range.’
Master Abrasives are a leading supplier of abrasives for grinding and finishing applications in various markets but particularly the aerospace industry. Manufacturing a comprehensive range of coated abrasives belts with an impressive 5 day lead time. They represent sia, 3M and SGA. Offering Meister superabrasive products and all sizes of conventional grinding wheels – they have the complete precision and surface finishing solutions.
The combination of Mastercam and Robotmaster is rapidly becoming the standard when it comes to robotic programming for both CNC and NDT applications. Robotmaster works as a seamless plug-in to Mastercam and takes the calculated toolpaths and trajectories then optimises them for use with the specified robot. Because the kinematic model of the robot is built into Robotmaster, it easily warns and graphically shows any issues such as joint overtravel, reach limits, singularity etc, which can then easily be corrected without the need to go back end edit the originally calculated toolpaths. Robotmaster can be used to programme a wide range of Robot makes including ABB, Fanuc, Kuka, Motoman, Staubli etc. The combination of a quality 6 axis robot, spindle and Robotmaster makes for a highly flexible and extremely cost effective CNC machining cell for composite and softer materials.
Materion AMC (formerly Aerospace Metal Composites Ltd) is a leading manufacturer of performance metal composites and alloys. Its technology is based on high quality powder metallurgy processing developed since 1993. The product range offers a combination of outstanding thermal and mechanical performance with lightweight characteristics. Our matrix composites have a proven track record in a wide range of demanding structural applications, offering customers significant advantages over conventional materials.
Material is available as billet, forgings, extrusion and machined parts. Materion AMC has the capability and experience to confirm material quality through mechanical and non-destructive test techniques.
Matrix Composite Materials Co. Ltdwww.mcmc-uk.com
MBRAUN and its partners offer clean environment solutions for all stages of OLED/PLED/OPV development and manufacturing-from laboratory systems to automated lines in leading-edge production environments. Supported by process tools including ovens\hotplates, coating equipment, and encapsulation equipment, MBRAUN covers every aspect of OLED/PLED/OPV research and production.
The very best in Force & Torque Testing for Quality Control Assessment
Mecmesin is a leading manufacturer of tension, compression and torque testing equipment used in the quality control and consistent manufacture of components, materials and products worldwide.
Our competitively priced test systems are used by designers and manufacturers to:
• Optimise their designs
• Ensure consistency in manufacture and improve productivity
• Bring products to market faster to maximise growth in turnover and profit
• Reduce material cost and achieve lean manufacturing goals
• Ensure products are manufactured to international standards
Our product range is very versatile and our universal test machines combined with dedicated grips and fixtures can be used to solve a variety of specific test applications including: adhesion/peel, coefficient of friction, compression, flexure, tension and torsion.
MecWash Systems Limited was established in 1993 to specialise in the design and manufacture of aqueous parts cleaning and degreasing systems for engineering components offering a safe and practical alternative to harmful solvents.
Our facilities include:
- Laboratory and R&D area for analysing customer samples
- Design Office with Solid Works 3D modelling software
- Manufacture facility for washing and water recycling systems
- Refurbishment and enhancement capabilities for used machines
- Manufacture facility for cleaners and inhibitors
- Agents/Distributors around the world
Manufacturing excellence in plastic and metal. At MEP we focus on delivering high quality components within your tight timescale from our AS9100 and ISO14001 environment. We specialise in the manufacture of complex metal and plastic parts, and our focus on quality and on-time delivery has led MEP to win multiple SC21 awards and preferred supplier status for some of the most prestigious aerospace and defence companies in the world.
Products & Services
- Composite Materials/Manufacture
- Materials & Components
- Plastic & Composite Component
- Precision Machining/Engineering
St Michaels Close, The Forstal Estate, Aylesford, Kent, ME20 7BU, United Kingdom
Merlin Tools is one of the UK’s leading suppliers of Solid Carbide Round Tooling manufactured in the USA in a facility with over 200 CNC Grinding Machines. With one of the largest stocks in the UK we can deliver the quality tools to meet your needs. The comprehensive range includes Standard, Bright & TiALN Coated in both Metric and imperial Sizes, Corner Radius and Corner Rounding Tools, Ultra High Performance for Aluminium and Variable Helix for High Speed Machining and a comprehensive range of Solid Carbide Performance Drills.
Metal Improvement Company provides quality controlled and cost effective surface treatments to meet our customer’s needs. Our services enhance performance and provide protection from premature metal and material failures.
Our services include:
- Controlled shot peening
- Laser peening
- Peen forming
- Engineered coatings
MIC has over 60 divisions located in Europe, Asia, USA and Canada and using our specialist teams can provide on-site processing worldwide.
Please view www.metalimprovement.co.uk for more information
or call +44 (0)1635 279621.
Meter Mix® Systems Limited is a leading UK manufacturer in the design, development and supply of precision metering, mixing & dispensing equipment for processing single and multi-component resins, adhesives & sealants. Materials processed include Polyurethanes, Epoxies, Silicones, Methacrylates and many more.
Our extensive facilities in Rushden are available for the test & development of existing and innovative resin based products. All machines are built to the highest standards and are rigorously tested prior to on-site commissioning at our customers premises.
Meter Mix® also manufacture a range of vacuum degassing chambers and automated robot applicator systems, including fully programmable XYZ co-ordinate platforms. Our portfolio includes equipment to process shot sizes from microdots up to multiple litres per minute. These machines are supplied to a wide variety of industries including Aerospace, Automotive, Medical, Composites, Filtration, Lighting, Electronic, Structural Glazing, and many more.
The Company prides itself on its UK based service and support team of skilled engineers, with a dedicated after-sales “Service & Care Package”. Meter Mix® machines come with a warranty that can be extended up to 3 years in order to provide the consistent, reliable and trouble-free production that our customers demand.
The MetPro Group is a global industrial packaging company specialising in corrosion prevention and metal protection. Our proprietary Volatile Corrosion Inhibitor (VCI) technology is available as paper and board, foam and as PE film products of all types. We also manufacture water-based additives for metal working, cleaning and coating, all with the added benefit of VCI. Our offering to the automotive, steel and engineering industries is further complimented by a range of packaging materials such as aluminium compound barrier foils, waxed and waterproof papers, steel wrapping films and laminates, plus bespoke constructions in films and papers from our Glasgow facility. The MetPro Group – excellence in metal protection systems.
Metrology Direct is a major supplier of measurement and inspection solutions throughout the UK and Ireland. The company represents a number of world class manufactures whose products range from basic hand held measuring instruments through to fully automated CNC controlled measuring systems. At Aero Engineering, we will be exhibiting the latest non-contact measurement technology with the Hommel-Etamic Opticline shaft measuring system and the Micro-Vu Vertex vision measuring system. A range of Wolpert Wilson Hardness Testers and Hommel-Etamic surface roughness measuring systems will also be on display. Metrology Direct is a progressive company and supports its customers with comprehensive installation, calibration, training and service support packages.
With the latest revolutionary breakthrough in perfect part production, Metrology Software Products Ltd, based in the UK, specialises in the design, development, and supply of world class 5-axis precision software. Our advanced part manufacturing solutions are found throughout the aerospace industry.
MSP’s innovative technology is recognised worldwide by technology leaders. One of numerous projects is development of UCCserver supplied by Renishaw, the only interface for their award winning Revo™.
Metron Advanced Equipment LtdMore
METRON Advanced Equipment Ltd. is a composites engineering consultancy based in Beeston, Nottingham. Our background in composites ranges from aerospace and armour applications to motorsport and highest level sport, primarily cycling. From material selection to tooling design, stress analysis and design for manufacture, METRON are leaders in their field in composite design and engineering. The founder of the company, Dimitris Katsanis, is a composites engineer with a background that blends the latest methods in many fields. Utilising 3D CAD and FEA stress analysis techniques as well as external resources for CFD and wind tunnel testing, METRON can improve each and every aspect of composites structures down to the finest detail.
Micro-Epsilon is an innovative company that understands the importance of providing complete solutions for Research & Technology and program applications. The company develops and manufactures sensors and sensor systems that measure displacement and temperature, distance, position, vibration, dimensions and thickness, using both contact and non-contact techniques, including 2D/3D laser optical, confocal chromatic, eddy current, capacitive, inductive, draw-wire, time-of-flight and non-contact infrared temperature sensors. Micro-Epsilon will be showcasing its unique solid state ECT (Embedded Coil Technology) for eddy current sensor technologies which offers significant benefits for aerospace applications over wound coil designs.
midasFEA provides multi-disciplinary analysis software solutions and services which cover structural FEA, CFD and topology optimization at very competitive prices. midasFEA has extensive experience in Auto, Aerospace, Marine and Civil applications.
midasFEA are the exclusive UK supplier of midasNFX and midasFX+ for the software giant MIDAS Information Technology Co. Ltd. offering a dedicated analysis and simulation capability combined with an excellent reputation for customer service.
With 40 years experience Midland Alloy supply the Automotive, Rail, Aerospace, Medical, Marine, Building and Engineering industries, and specialise in:
Bending Aluminium Extrusions and other metal sections. Small, medium and large extrusions of varying complexity are 2D and 3D shaped to customer’s requirements, using Stretch-forming, Roll-forming, Mandrel Draw-bending and other specialised techniques.
5-axis CNC Machining. In addition to conventional CNC equipment, 5 large machining centres are dedicated to complex 5-axis CNC capability up to 5m x 3m x 1m high maximum component sizes. Aluminium, steel, stainless and cast iron materials are machined.
TIG Welding. Fine penetration welding of aluminium is undertaken by experienced coded staff to BS EN ISO 9606-2:2004. Stainless steel and other metals are also welded.
Tool Design and Manufacture. Jigs, Fixtures and Full Form Tools are produced in-house using CAD/CAM and simulation software ensuring cost effective and efficient introduction of new projects.
CMM Inspection using FARO arms and bridge type equipment assists Quality Control and PPAP, for full component verification. Maintaining quality, accuracy and consistency throughout ongoing production is paramount.
This year we are part of Telford and Wrekin Council “Invest in Telford” stand.
Visit: Hall 5, Stand H19. www.midlandalloy.com Tel: 01952 290961 email@example.com.
MIRA is a world-class vehicle engineering and consultancy company with over 65 years of rich engineering heritage. With more than 500 industry experts, 90km of specialised proving ground and over 30 major test facilities, MIRA continues to lead the way in vehicle engineering, test and design. Our unique offering allows our dedicated staff to carry out an array of advanced modelling and simulation techniques within the same location, enabling us to provide smarter solutions to our customers’ challenging problems.
Mirka has been a leading manufacturer and supplier of abrasives to the automotive industry, automotive refinishing, composite manufacturers, the wood and furniture industries as well as the metal finishing industries for more than three decades. We are specialists in coated, non-woven and dust-free sanding products for surface finishing, manufactured in our modern production facility in Finland. Our extensive product range caters for both individual operations and complete sanding systems. The unique Mirka concept of dust-free sanding, combined with our effective surface finishing solutions has replaced traditional sanding methods in many industries. The abrasive range is complemented with supplementary products and accessories, which enables us to offer our customers complete sanding solutions.
MJ Allen produces low and medium volume, high integrity, complex core assembly, sand castings in aluminium (to 1 tonne), grey iron (to 2 tonne), SG iron (2 tonne) and copper alloys (to 750kg). The recent expansion of our aluminium gravity die casting (to 50kg) facility has now given us a medium to high volume capability. Coupled with this, our fully equipped CNC (now with fine tolerance boring in temperature controlled environment) and conventional machine shop, with assembly and finishing on-site, enable our customers to place a single order for finished components of almost any size and volume.
ML Electronics are a leading electronics design and product development company with our own manufacturing division. We specialise in developing robust, high performance, high reliability solutions for clients operating in highly regulated markets such as automotive.
We have worked with clients from all areas of the industry, ranging from Formula 1 teams to Tier 1 and 2 suppliers and niche manufacturers. To learn more about how we can help you, please visit us on stand I95.
Our History Established over 40 years ago, Momentum Engineering has become a leading supplier to many areas of the automotive, aerospace, railway, construction, petro-chemical, electronics and defence sectors. We are an ISO 9001 company providing high-precision components internationally. Our Service Specialising in high integrity CNC machining, projects range from one-off prototypes through to large batch sizes, requiring 24 hour unmanned machining. Continuous investment in the latest technology and machine tools, we offer exceptional flexibility and versatility, reliability and efficiency, Please refer to our web site or call us directly to support your engineering requirements. www.momentumengineeringltd.co.uk or call + (0) 1675 465024.
MonsterCAM – we are the new name on the block but we combine many years’ experience in Plug, Mould and Composite part manufacture. We have the largest independent 5-axis machining centre in the UK, with a 45 metre capacity. Our coastal based facilities are geared to the Wind Turbine Industry, Marine Industry and Engineering and Architectural Manufacturing sectors. We’re Shaping the Future.
Morgan Advanced Materials Composites and Defence Systems/NP Aerospacewww.morganadvancedmaterials.com/products/composites-defence-systems/ More
“Morgan Advanced Materials – Composites produces specialist components for demanding technical applications using advanced composite materials and manufacturing techniques.
Drawing on 90 years of engineering and materials knowledge in concept design, validation, testing and manufacture we produce a range of composite products. Our focus is highly demanding applications, from high strength composite brackets to large scale supporting structures we can help your products achieve the highest performance at the lowest weight.”
mouldCAM – We shape innovative design.
Large scale CNC Patterns and Moulds or MC3 direct mould tools.
5axis CNC Envelope of (x) 36.5m (y) 6.2m (z) 3m and 0.5mm tolerances.
Production facilities in Poole, Dorset, UK – Brisbane, Australia – Bristol, Rhode Island, USA.
Aerospace – Architectural – Automotive – Defence – Industrial – Marine – Medical – Renewables – Stage and Screen.
Specialists in carbon capable or epoxy monolithic and post cured vacuum capable mould tools and high gloss vinylester systems for low or high volume production.
In-house design, engineering, mould FEA and 3D scanning.
Innovation in CNC accuracy from a truly global partner that supports you locally.
MouldlifeTM are an innovative and internationally recognised supplier of high performance materials.
Operating from a purpose built research, design and manufacturing facility in Suffolk, MouldlifeTM’s specialist team is focused on providing leading technical and professional advice to all their customers. Collectively the team has over 80 years of dedicated technical expertise in the polymer materials field.
MouldlifeTM has invested substantially over the last few years, reinforcing their position as an industry leader. The implementation of ISO9001:2008 QA Management System processes ensure a consistently high quality service to its customers.
Our comprehensive product range is sourced from the world’s leading brands such as Araldite, Bluestar and Polytek and comprises Epoxy, Urethane, Silicone and Acrylic chemistries which cover a multitude of applications from the design through to the production of components.
Our services range from customised resin formulation, With IATA trained staff also safely and correctly export to all countries in the world and comply with all international legislation on the transportation of dangerous goods. MouldlifeTM offer full technical support to complement an extensive and innovative range.
Machining, cutting and kitting services that save you time and money in your processes making then easier to manage.
Foam core materials, fibreglass mat, carbon, pre-pregs and dry fabrics, Kevlar, Sprint.
Waterjet and 3&5 Axis machining:
Foam Core materials, G10, Nylon 66, Tufnol, PVC, Alloys, Honeycomb, sheet carbon, sandwich panels, cork, glass fibre skins.
Ask us about cutting your materials
MSC Software is one of the ten original software companies and the worldwide leader in multidiscipline simulation. As a trusted partner, MSC Software helps companies improve quality, save time and reduce costs associated with design and test of manufactured products. Academic institutions, researchers, and students employ MSC technology to expand individual knowledge as well as expand the horizon of simulation. MSC Software’s engineering simulation technology is used by leading manufacturers for linear and nonlinear finite element analysis (FEA), acoustics, CFD, multi-physics, optimization, fatigue and durability, multi-body dynamics, and control systems simulation.
MULTIAX International CNC, with Headquarters located in North East Italy, designs, manufactures and follows the installations and servicing of CNC routing machines (with relevant dedicated software) for plastic, aluminum and composite materials industries.
MULTIAX aims to be a first-class reference for the satisfaction of its own customers in terms of CNC Machining operations
More than 200 customers worldwide who use MULTIAX machines represent a credible and proudly business card for the company
Nabertherm with 350 employees worldwide have been developing and producing industrial furnaces for many different applications for over 60 years. As a manufacturer, Nabertherm offers the widest and deepest range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer proof of our commitment to excellent design, quality and cost efficiency. Short delivery times are ensured due to our complete inhouse production and our wide variety of standard furnaces.
The National Composites Centre is an independent, open-access centre operating from a state-of-the-art 8,500 m2 facility, delivering world-class innovation in the design and manufacture of composites, to enable widespread industrial exploitation.
The NCC is the leading hub of the UKs regional centres of composites of excellence, is industry led, hosted by Bristol University, and is part of the High Value Manufacturing Technology Innovation Centre.
The NCC links activities across all sectors of the UK in composites research, development, prototype manufacture and training,
Several levels of opportunity for Membership engagement exist.
The NCC facility was part financed by the ERDF, BIS & SWRDA
NPL is a UK national science laboratory responding to the economic and social challenges of government and businesses, translating scientific research to improve quality of life, introduce or improve products and processes, and increase commercial competitive advantage.
We are a world-leading national laboratory where our achievements result from occupying a unique transition point between excellence in state-of-the-art measurement science research and knowledge and market demand for applied technical solutions.
Our expertise and innovation eliminates the need for specialist in-house resources, reduces technical risk, and can deliver revenue, cost and time savings for complex technical challenges
Customers have access to over 500 multi-disciplinary scientists, along with an extensive national and international network of partners
Nemesis is a leading brand supplier to the UK car markets. We provide a wide range of ‘business to business’ and ‘business to consumer’ services for our brands and have been driven by an entrepreneurial enthusiasm since 1997. We have a desire to provide products that solve “challenges” faced by consumers in the car, at home and during leisure time. We are approachable and inquisitive in the way we conduct our business and obsessive on behalf of our brands.
NetComposites is a global research, consultancy and online media company, creating and using innovative technologies to advance the composites industry.
This comprehensive portal contains over 10,000 pages of indispensable information for composites professionals, including a guide to composites, latest industry news, calendar, glossary, industry directory and the world’s largest online stores for composites information.
As well as managing this web site, our activities span research, development, consultancy, networking, brokerage and recruitment. Our experience covers the breadth of composite materials, applications and business issues, and companies use us to create innovative composite products and processes, or to advise on trends in the future of the industry.
NETZSCH Analysing and Testing has a product portfolio for applications in thermal analysis and thermophysical properties testing that rank among the best in the market for meeting the high demands associated with reliable manufacturing and state of the art research and development.
The main techniques include Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), Dilatometry (DIL), Laser Flash Analysis (LFA), Thermogravimetric Analysis (TGA) and Evolved Gas analysis.
These techniques give insight into the thermal properties of polymers and composites, and can be used to characterise plastic and rubber compounds, and to determine information regarding the condition or processing history of specific samples.
Newgate Simms Ltdwww.newgatesimms.co.uk
Nicholsons are global specialists in the design and manufacture of resilient metal seals, gaskets and ancillary components. Our diverse range of precision metal sealing solutions accommodates extreme compression, temperature and pressure. Nicholsons deliver a complete engineering service from design and prototype manufacture to full volume production of standard, optimised and bespoke seals. With ISO/AS/TS and NADCAP accreditations, Nicholsons integrated service includes machining, rolling, forming, heat treatment and chemical processing.
NORCO GRP Ltd established in 1985 in Poole, Dorset. We employ 160 people and specialise in Glassfibre / Composite mouldings for end users all over the world. We operate from four sites with an overall capacity of 70,000 sq ft. Our team provides a complete service from inception and development of ideas through to plug and tool making to the final manufactured product which can include full assembly.
Stringent quality procedures are adhered to throughout all stages of production. We hold ISO 9001, 14001, 18001 and Investors In People accreditations.
If the product you require can be manufactured from composite materials then we will endeavour to not only satisfy but exceed your requirements.
Nord Composites is a formulator of polyester resins and gel coats specialising in innovative products with a solution based approach to product development.
With our main manufacturing facilities in Picardy France, we are able to offer cost effective solutions to the composites industry with speed and efficiency.
With 3 R&D laboratories, we are constantly developing new products based on current and future market demand and we are the leaders in rapid tooling systems, exporting worldwide.
In the UK we specialise in pigment, coloured gel coat and top coat manufacture, with a rapid response to customer needs. We provide a comprehensive portfolio of polyesters, vinylesters, tooling products, reinforcements and ancillary equipment.
North Composites Engineering Ltd is a world class specialist in composite training for Aerospace, Marine, Wind Turbine and the Automotive sectors. Courses can be bespoke or can be accommodated in our scheduled program of training. At North Composites Engineering our highly qualified engineers use their experiences and knowledge base to develop and apply competitive composite design, repair and processing to our in-depth training programs. We are the sole distributor for Aeroform France, enabling us to support your processing and repair equipment needs. Partnered with Midas-NDT we provide bespoke NDT solutions for composites. Our new training facility is now open and fully equipped with the latest ATEX rated clean air extraction system.
Northamptonshire Enterprise Partnership is a private sector led public, private, voluntary sector partnership for Northamptonshire. Its purpose is to develop the Northamptonshire economy, to support local job creation in a key growth area and to build a successful and sustainable economy for the benefit of the county’s communities, businesses and visitors. Our aim is that by 2015, Northamptonshire will be one of the most cutting-edge and competitive sub-regions in Europe and will be recognised as such by its visitors, employers, investors and residents.
The Northwest Automotive Alliance (NAA) has one key objective: to help its member companies to become more successful. The NAA is industry led, with a board chaired by Bentley Motors and comprising of senior managers representing both large and small companies. It is a not-for-profit organisation, which provides membership and project management services to the automotive community. Established in 2010, the £2.2 million ‘Business Excellence Programme’ (BEP)offers flexible funded technical support, networking and promotional opportunities with the aim of improving the competitiveness and profitability of the region’s automotive sector.
Nottingham Trent University, Advanced Textiles Research Groupwww.ntu.ac.uk/research/groupsd centres/art/create More
School of Art and Design – Stand: F19
: Nottingham Trent University is officially ranked one of the top ten ‘new’ universities in the UK (The Complete University Guide, 2013). With an excellent employability record, almost 150 courses are formally accredited or recognised by a professional, statutory or regulatory body. Founded in 1843, the School of Art & Design at NTU is one of the most established in the UK, offering an international reputation for creative excellence, and the Advanced Textiles research group is located within the School. The group is pioneering the way electronic textiles are produced by fully integrating electronics into the core of yarns.
NT CADCAM Ltdwww.ntcadcam.co.uk
OE Systems limited design, develop and manufacture innovative electronic hardware. Focusing on efficiency, integrity and simplicity.
OE Systems will introduce two distinct auto electronic products Bladsense™ and ProSonicA™:
Bladesense™ actively monitors and protects sensitive electronic circuits through the direct replacement of the commonplace blade fuse.
ProSonicA™ is a range of audio modules for portable media streaming catering for all applications from MP3 to CD quality through to esoteric audiophile quality.
With many years’ experience in the field of wear protection, Oerlikon Balzers is promoting its advanced surface technologies applied on precision components and performance tools.
The unique frictional and wear properties of BALINIT® coatings enable higher performance with smaller dimensions and weight, increased service life and functional reliability, replacement of expensive special materials, reduced consumption of lubricants and lower maintenance costs and dry running.
OGP UK delivers the most advanced and accurate multi-sensor measurement systems. From small benchtop non-contact scopes, up to large floor-standing multi-sensor systems, OGP ensures the highest levels of accuracy, repeatability and throughput. Meanwhile, the nature of our multi-sensor measurement capabilities ensures that our machines are truly future-proof. OGP has become the metrology solution of choice for the aerospace and automotive markets in the UK.
Olympus is renowned as the leading manufacturer and supplier of non-destructive testing and remote visual inspection equipment for engineering and maintenance applications throughout the world.
Olympus provides industry-leading testing technologies including ultrasound phased-array, eddy current, and eddy current array. Olympus also offer an extensive range of IPLEX videoscopes, including the new palm sized UltraLite, fiberscopes, borescopes, XRF X-ray Fluorescence analysers, plus world class High Speed Video Cameras
Precision gear and gearbox manufacturer, Ondrives Ltd, have recently ordered and taken receipt of several new grinding and gear cutting machines capable of producing highly precise parts especially suitable for the aerospace sector.
The range of products offered includes spur and anti-backlash gears, pinion shafts, racks, parallel and crossed helical gears – all available in a range of different materials as standard as well as a skive hobbed range.
OPEN MIND is a leading developer of CAD/CAM software to increase productivity, reduce manufacturing costs and manufacture high-quality parts. hyperMILL® offers comprehensive solutions ranging from 2D feature-oriented procedures to 5-axis simultaneous machining and mill-turn. hyperMILL is used in thousands of installations worldwide in aerospace, automotive, motorsport, medical and energy markets.
Optris is a technology company specialized in the development, production and sales of devices for non-contact infrared temperature measurement. The Optris product line includes portable infrared thermometers, stationary industrial infrared thermometers, as well as infrared cameras and calibration sources. With their optimized price-performance characteristics, Optris IR temperature measurement technology sets a new standard for integration in OEM solutions as well as industrial applications with multiple infrared measurement locations.
OSG has long been renowned for innovations in cutting tool technology across a wide range of industries. OSG has been particularly effective within industries such as automotive and aerospace that utilize cutting tools to enhance the capabilities of CNC machining equipment.
New lightweight high strength materials being used in these industries are proving extremely difficult to machine, so tooling technology has had to develop at a breathtaking pace to cope. OSG now has a complete suite of tools, including tapping, drilling & milling products with advanced coatings including diamond.
As the world leader in the ongoing development of new cutting tool technology, OSG take pride in sharing our design capabilities with all of our customers.
Outsourcing B2B Marketing, Northamptonshire, UK
Marketing & PR Specialists for Composites, Engineering Plastics and Adhesives
Using our extensive industrial marketing experience, gained from working for leading Composites and Engineering Plastics multinationals, we help companies deliver key marketing activities including: new business development, sales tools, website updates, e-marketing, exhibitions and global application story PR coverage in target magazines and websites.
“All the benefits of a big marketing team, but only when you need it.”
Website : www.outsourcingb2bmarketing.com
Nigel O’Dea, Founder & Director, Outsourcing B2B Marketing
Tel +44 (0) 1536 210133 Mobile +44 (0)7545 695984
Parkhill Textiles are manufacturers of woven, knitted and tufted two and three dimensional glass fibre reinforcement fabrics for the composites industry. We manufacture many standard fabrics in synthetics, glass fibre and high modulus fibre, however the vast majority of our fabrics are tailor made to our customers requirements to ensure maximum performance, strength and cost benefit to the product.
Our many years of textile knowledge and experience enable us to manufacture two dimensional and complex three dimensional fibreglass fabrics, which are used as pre-forms within the composites industry. Our fabrics are specified for applications in aerospace, automotive, defence, ballistics, marine, wind construction nd other industries.
Patterns and Moulds offer full 5 axis cnc machining on our 2 large scale machines and tooling manufacture to the composites industry.
Using varied materials from MDF through polyurethane and epoxy tooling boards to Epoxy seamless modelling pastes for large scale master patterns and tools.
Grp production moulds using resin systems to suit customers needs and requirements.
Full in house Cad/Cam operation with Solidworks for design, Mastercam pro for cnc machine toolpath creation along with NCSimul for Toolpath verification.
PCB Piezotronics manufacture sensors: Accelerometers, dynamic force and pressure sensors, MEMS, hi-shock , seismic and hi-temperature accelerometers, microphones and accessories. Maintaining a large stock for quick delivery, PCB guarantees Total Customer Satisfaction.
Pendago Career Management (CM) help you get to the core of who you really are, help you to understand what drives you and where your interests lie. From here Pendago CM will support you in creating a strategy map of how your career will move forward from your current position to where you want to be and the route you need to take to get there.
Pentaxia is a new company with a lot of experience! Established in 2008 in a new 10,000sq ft facility in Derby we have three large 5 axis machines with machining envelopes up to 3×2.5×0.5m and three VMC’s. We will be installing a larger 5 axis machine in early 2012. Our bright young team use Delcam Powermill and PowerInspect and can work in most cad formats.
In 2011 we installed a new 3.4×1.9m autoclave with cooling and associated facilities as we expanded our business. We can now offer a complete advanced composite service from design to volume manufacturing. We work with the leading players in the motorsport, aerospace and industrial markets, producing patterns, tooling and finished product. We are ISO 9001 approved.
“Permabond is a global manufacturer of engineering adhesive solutions supplying to a wide variety of markets including aerospace, automotive and composites. Using adhesive is an effective way of joining composites and other materials, helping maintain the structural integrity and performance of your composite, whilst giving a high-strength, high performance bond and an aesthetically pleasing appearance. New for 2012, Permabond is launching a range of new single part and 2 part epoxy adhesives developed for bonding carbon fibre and other composites materials, as well as an Engineer’s Adhesive Guide in the form of an iphone app. For more information on these new products or to discuss your particular application with a view to identifying the optimum adhesive please contact us.”
Pexa is a supplier of high technology materials to the aerospace and defence industries. We are trusted partners of brand leading industrial product manufacturers; we employ progressive supply chain systems to deliver our promises. Our mission is to assist our customers to meet their own business objectives using our products and services; these products include surface finishing materials, aircraft maintenance products, application equipment and unique packaging solutions.
Photron, designer and manufacturer of digital high-speed imaging cameras supply high specification systems to Universities and Industry for applications not limited to:
- Solid Mechanics (tensile and comrpession testing, Split Hopkinson Bar Testing, Crack propogation, DIC)
- Fluid Mechanics (sprays, fluid flows, PIV)
- Defence (balistics, explosives, protection, shock physics)
- Automotive Safety Testing (crash test – on and off-board, airbag, rollover, component testing).
Current products range from miniature multi-head systems offering 2,000fps @ 512 x 512 pixels through to high resolution 4 mega-pixel (2048 x 2048 pixels) @ 1,000fps and high-speed 1 mega pixel @ 10,000fps (max > 1 million fps).
Pico Technology is the world leader in PC-based Oscilloscopes, with over 20 years’ experience and a wealth of engineering talent. Recently short-listed as a finalist in the 2013 NASA Tech Briefs, PicoScopes offer a modern and cost effective alternative to traditional, costly, bench-top test and measurement equipment. PicoScope provides a comprehensive set of features, excellent performance and ‘free for life’ software updates. PicoScopes are used in a wide range of applications across many different industries due to their portability, connectivity and outstanding value for money. Special decoding functions are included as standard for CAN, LIN, Flex Ray, MOST, I2S, I2C and many more. Visit us on booth G62, to find out more.
Plastribution is the UK leading distributor of thermoplastic raw materials, connecting the world’s leading polymer suppliers with designers, specifiers and end users. We specialise in supplying a full range of polyolefin’s, styrenics, engineering polymers, specialities, masterbatches and custom compounds for packaging, construction, automotive, medical, aero, industrial electronic and electrical applications in quantities from 25 kgs to full truck loads, and support this with a comprehensive technical service.
Plastribution are introducing their new metal replacement brochure and associated website at the Auto Engineering show. They will also have parts on display show casing the various properties that can be achieved with their range of high end engineering polymers, and welcome all to their stand to view and discuss these.
They can be found on stand H3.
We provide innovative packaging and dispensing solutions for difficult to handle materials: syringe assemblies, sachet packs, cartridges, and systems for multi-component materials, or virtually any package that is essential to your operations.
We provide packaging for structural adhesives and many other materials to eliminate waste, improve productivity and safety.
No Mess. No Waste. No Problem
Precision Engineering Plastics (PEP) is the manufacturer of close tolerance injection moulded components.
Working in industries as diverse as automotive, electrical/ electronics, engineering, medical and defence, we deliver the fullest range of injection moulding, insert moulding, 2 shot moulding and secondary/ post-processing services.
PEP offers in-house tool design, product design capabilities and a fully-equipped toolroom which together delivers a comprehensive service from initial design evaluation through to new tool manufacture.
PRESI UK is all about supplying an international metallographic brand with a local consultancy, service and delivery. Presi is specialised in cutting, mounting, grinding, polishing, hardness measurement and microscopy.
PRF Composite Materials is a leading supplier of high performance materials for the advanced composite industry. PRF has a comprehensive range of products including high performance reinforcements, prepregs, epoxy resin systems, core materials, vacuum bag materials, consumables and tooling products.
The product range is fully supported by highly experienced technicians and engineers, enabling PRF to offer a complete service to its customers. PRF is committed to supplying materials of the highest quality, whilst simultaneously making products available for immediate despatch from large stocks held in extensive warehouse and cold storage facilities.
Printed Electronics Limited (PEL) is a UK based company and is focused on the development of materials, processes, products and systems for the commercial fabrication of printed electronic circuits, structures and devices using inkjet and other printing methods. PEL offers commercial access to an industry-leading InkTronics laboratory for secure use under short and long term contracts: full training is available. PEL offers design-and-build facilities including electronic functionalisation of 3D structures using a 4-axis printing platform.
Proceq SA of Switzerland, founded in 1954, is a leading manufacturer of high quality portable instruments for non-destructive testing of materials such as concrete, metal or paper. The company’s strong research and development team continues to create products that set industry standards. Proceq is the inventor of the Equotip – the most established and renowned instrument for portable metal hardness testing. Proceq revolutionized the market in 1975 when it launched the first Equotip. The inventor of the Leeb rebound technique has put its many years of experience into the development of the famous Equotip. Proceqs other NDT portable instruments includes Equostat (Static Hardness Tester), Piccolo/Bambino and Zonotip (UPV flaw detector).
Project 12 specialises in spray painting lacquer, clear coat and wet paint on carbon fibre and composites. We are tier 1 suppliers to a number of OEM’s and are well recognised for delivering the very highest standards in quality of product and customer services alike. Please call by our stand to see examples of our work.
Plastics & Rubber Weekly (PRW) is the leading magazine serving the whole of the UK polymer industry, its suppliers and customers. PRW is a genuinely vital source of information for its plastics and rubber readership, wherever they are in their supply chain. In terms of timeliness, independence and coverage, there is no equivalent to PRW’s news section in this industry. Every week PRW also publishes an in-depth feature on the key sectors and processes in the UK plastics industry, along with regular updates on technology, regulation and personnel changes.
The leading supplier of specialist coatings, adhesives & chemicals for aerospace, defence & specialist applications worldwide. We have recently been appointed as official authorised distributor for the Hysol range of structural adhesives from Henkel and will be featuring these products at the show. Hysol is a leading brand for structural assembly solutions for both composites and metal/honeycomb. Offering full technical support with fast, efficient delivery including an emergency service.
Pulstec Industrial Co. Ltd. is a Japanese company, with a permanent office in the UK. We specialise in the design & manufacture of measurement equipment and will be exhibiting our new lab/portable non-destructive Residual Stress equipment the μ-X360 based on X-ray diffraction (XRD). Unlike other XRD systems, the μ-X360 is able to detect and analyse the complete Debye ring with one single short duration low intensity exposure, rapidly giving the value of residual stress, and the Debye ring image reveals crystallographic texture and grain size information. This easy to set up and use, compact system, is now established in many Japanese industries, including aero-space, automotive, and construction. It is particularly suited to the measurement of many metallic components and structures, including, springs, gears, welds, rail track, rolling stock axles and peened surfaces.
Pyromeral Systems specializes in thermostructural composite materials for applications up to 800°C. With our expertise in inorganic polymers and glass-ceramic matrices, we manufacture innovative composite parts and systems exposed to elevated temperatures in motorsport, aerospace, defense and industrial applications. Thanks to a strong focus on process optimization, our technologies are more convenient and quicker to implement than most alternative high-temperature systems. Typical uses include: lightweight structural heat shields, fire barriers, composite exhaust ducts, high temperature composite tooling.
Quality International Assurance (QIA) is a full-service provider of quality inspection, containment, rework, firewall and client representation solutions for automotive, aerospace and many other sectors. At QIA we are committed easing your pain through finding and developing bespoke solutions that will enable us to resolve your concerns quickly and efficiently.
Supporting Media Partner – Stand: D2
QMT Magazine is a multi-media print and on-line magazine for the quality, measurement, inspection and test industries, supported with a fully searchable interactive website –www.qmtmag.com
QMT promotes improvements in manufacturing processes and products through quality control and quality management, from automotive and aerospace to food and pharmaceutical sectors.
QMT is published eight times a year with free subscription for the UK and Europe – Outside Europe, annual print subscription charges apply.
QMT digital is a fully searchable, hyperlinked on-line magazine for on-line Global readership and also publishes e-newsletters with additional circulation.
QMT is supporting Media Partner with Major Trade & Industry Events as listed on the QMT website: www.qmtmag.com.
More information & free registration for QMT Print, Digital & Email Newsletters, visit www.qmtmag.com
QMT – The Voice for Quality in Manufacturing
The Rubber And Plastics Research Association (RAPRA) has been serving industry since 1919 highlighting the latest breakthroughs in science and technology to help companies turn their innovations into viable commercial products. We are therefore extremely pleased to be hosting technical sessions in Open Forum 3 on both days of the 2013 Composites Engineering Show, where expert speakers from the RAPRA Network of Preferred Partners and Service Providers will continue this tradition. To chat with the specialists presenting in the RAPRA sessions, please visit the RAPRA stand in Hall 5, H165. For more information about RAPRA visit www.rapra.org
RDR Aerospace Ltd is a technical distributor working with the Magnolia Plastics and Zyvax to provide high quality materials to the Aerospace and High Performance Composites Industries
Magnolia Plastics manufacture epoxy adhesives, core and edge fill materials, for Structural and Interior (flame retardant) applications for Aerospace and other Industries worldwide. www.magnoliaplastics.com
Zyvax qualified WATERWORKS AEROSPACE RELEASE and STAYZ epoxy adhesive for prepregs and infusion, will be featured along with other AS9100 certified products including the new, solvent-free NANO RELEASE SYSTEM. www.zyvax.com
We are leading optical engineers in the UK manufacture and design of precision optical systems, sub-assemblies and optical components. RDT Precision Optics serves an array of worldwide industries including Defence, Medical, Pre press printing, Semi-conductor, Fluoresence, Optical prcessing and Optical correlators. We manufacture optical systems and optical components at our comprehensive facility, also using outside expertise such as trusted coating facilities when required. Our optical and mechanical engineering staff are highly experienced in polishing, machining through to final inspection to provide a high quality service.
Red Composites is a UK based Composite material manufacturing company. Our primary product is pre-impregnated structural yarns of carbon and glass fibres, commonly termed as Towpreg. These products are used for the fabrication of performance composite tubular structures and pressure vessels in the Industrial, Aeronautical, Defence, Marine and Automotive markets.
We operate a comprehensive, in-house mechanical test/analytical laboratory and can offer other specialised advanced polymer materials to complement our range of structural Towpregs.
Reddie & Grose is a full service firm of UK intellectual property attorneys with a highly experienced and friendly team. Offering an integrated approach to IP, we are able to provide global protection for all aspects of patents, trade marks and designs.
We work closely with a wide variety of businesses in a diverse range of subject matters. Since our foundation in 1907, we have continued to build long lasting relationships with our clients, which include some of the world’s best-known companies and brands.
From design to delivery, Rediweld has a complete service offer for technical moulding of thermoplastics, thermosets and rubber including composite parts. As well as component moulding, we offer design concepts, product introduction, machining & finishing, assembly & testing and parts delivery. Focussed on aerospace & defence Rediweld is AS9100 certified and a member of SC21.
‘SC21 Bronze Accredited’
A world leader in engineering technologies, Renishaw applies its core skills in measurement and precision machining to sectors as diverse as dimensional metrology, spectroscopy, machine calibration, motion control, dentistry and surgical robotics. At Aero Engineering see our latest range of automated sensing systems for co-ordinate measuring machines, machine tool touch probes and laser tool setters that aid process control, and a wireless ballbar for analysing machine tool performance including volumetric tests.
REC Global is a software engineering company providing R&D software services and bespoke software solutions to companies across the globe. From our six dedicated development centers in Poland, Slovakia and Croatia, REC Global works for quality-demanding industries including Automotive, Industry & Automation, Telematics & M2M, Telecommunications, and Web, Mobile and Enterprise Applications. REC Global has more than 350 highly qualified engineers working together to apply their technical knowledge and skills in software engineering. Our engineers have an international reputation for their pro-active approach to software solutions. REC Global’s success is confirmed by trust and references from more than 60 international customers.
Retrac Composites Ltd supply production mould tools (metal and composite), production components (metal and composite) as well as offering design and R & D services to the Aerospace and Motorsport industries. We have NDT incorporating the latest Ultrasonic and Phased array systems and CATIA V5 CAD.
We pride ourselves on the quality of both our product and our service and have a reputation for quality and delivery with our customers. We specialise in producing the more complicated components and tooling for our customers. Our qualifications include AS 9100, SC21, ISO 9001:2008, ISO 14001 and ISO 18001.
Reverie Limited offers UK design and manufacturing services for low-medium volume production hand laminated pre-preg autoclaved composite components.
Our services can take a product from conceptual sketches right through to 3d Cad models to perform FMEA, mass and costing calculations. We produce cad files for required patterns or tooling suitable for the clients volume and cost constraints.
Reverie limited has experience in automotive, mainly motorsport inc WRC and LMP, also telecommunications equipment with proven expertise in EMC compliance and indeed many other sectors inc model yachting, cases, sporting equipment etc.
Please come and talk to Simon on our stand to see if we can help with your composite requirements.
Jenkins is a firm of patent and trade mark attorneys founded in 1937 in London. The firm has built one of the largest and most successful intellectual property practices in the United Kingdom, with offices in London, Bristol, Farnham, Munich & Beijing.
Jenkins’ clients’ interests span a wide range of industries, including fast-moving consumer goods, IT, telecoms, financial services, electronics, materials, manufacturing, life sciences, medtech, pharmaceuticals, media and aviation.
The firm has a reputation for honesty, clarity, creativity and tenacity in the pursuit of its clients’ commercial goals, which are achieved through the highly focused protection, defence and enforcement of patent, design and trade mark rights in the UK and internationally.
Contact information – firstname.lastname@example.org tel: 020 7931 7141
Rical Group, a key manufacturer to the UK and Global Automotive Sector, with capacity for Fine Blank, Complex, Deep drawn Metal Pressings along with zinc and aluminium Die-castings and Sheet Metal Fabrications.
- Privately owned group
- 7 Manufacturing Sites, Midlands based servicing global markets
- Customer segments include:
- Automotive, Rail, Electronics/ General industrial, Commercial catering, White goods, Textile and Jewelry
- Number of employees: 300+ Employees
- Core activities :
- Fine Blanking
- Deep Drawn Presswork
- Conventional Presswork
- Zinc and Aluminum Die Casting
- Multi-slide and Bihler Strip Forms
- Precision Wire Products
- Sheet Metal Fabrication
Special perforation and forming.
RMIG Nold GmbH produces perforated, formed metal products and components for automotive applications:
loudspeaker and ventilation grilles, airbag components, stamping and punching parts, protective covers – all with precision and quality.
We supply components ready to install as a combination of metal and plastics. On request, parts will be completed with logo, chrome frame,
built-in speakers or foam/fleece inlay. We undertake feasibility studies, creation of product concepts, construction and we have our own tooling facilities.
Rockwood Composites specialise in the manufacture of components using ‘Out-of–autoclave’ manufacturing including Bladder, Compression and High CTE and moulding processes.
Established in 2010 with a 20 year foundation of composite manufacturing that serves Industrial, Medical, Defence, Aerospace and Leisure markets with precision, high performance structures.
We provide manufacturing solutions, by providing customers with “Design for Manufacture” support aimed at minimise tooling cost, maximising quality and reducing component cost and lead time.
Rosedale Products Europe Ltd is a leading company in the field of liquid filtration systems and waste reduction products. Our product line includes high performance solutions as well as low-cost approaches to filtration needs. Our core products are bag filters, cartridge filters and basket strainers. Supporting items include centrifugal separators, automatic back-flushing systems, vibrating filters and fabricated pressure vessels.
STAND: B15 – Supporting Industry Partner
The Royal Aeronautical Society (RAeS) is the world’s only professional body dedicated to the entire aerospace community and exists to promote the highest professional standards and further the art, science and engineering of aeronautics.
Established in 1866 the Society now has over 17,000 members and has become an international multidisciplinary institution dedicated to the global aerospace community.
The Society assists with professional development and recognition, provides specialist information on a broad spectrum of technical topics, acts as a central forum for the exchange of ideas and plays a leading role in influencing opinion on aerospace matters.
Sab-bnl stands for assembly tooling, custom made tooling and complete automated systems. Our services and products are offered direct to production and assembly facilities.
Safe Technology is the technical leader in the design and development of fatigue analysis software, specialising in fatigue from FEA. fe-safe® is its flagship product. Previously concerned only with the fatigue of metals, in 2010 Safe Technology partnered with Firehole Composites to market fe-safe/Composites, a unique and advanced solution for the fatigue analysis of composite materials.
Key benefits of fe-safe/Composites: 1. Efficient, multiscale analysis for unidirectional composites structures 2. Superior insight into composite fatigue behaviour 3. Optimised designs with accurate simulation capability, minimising the need for over-design 4. Reduced composites FEA simulation time due to computational efficiency 5. Reduced cost and time-to-market with accurate simulation and reduced need for physical testing 6. Requires only standard, static material properties and minimal fatigue characterization 6. Can handle arbitrarily complex load histories.
With fe-safe as an integrated part of your design process, you have the ability to optimise designs and test programs, reduce prototype test times, product recalls and warranty costs – all with increased confidence that your product designs pass their test schedules as “right first time”.
SAFECHEM Europe, a subsidiary of The Dow Chemical Company, is an experienced solutions provider for the safe and sustainable use of Trichloroethylene, Perchloroethylene and Methylene Chloride solvents as well as modified alcohols in high quality precision parts cleaning. The heart of the SAFECHEM concept is the SAFE-TAINER system, an innovative closed-loop system for the supply of high quality, Dow branded fresh solvents and the take back of used solvents.
Safetykleen offers parts washing, spray equipment cleaning and waste management services to aircraft manufacturers, MRO service providers and airport authorities. We assist our customer base in extending asset life, improving safety and meeting carbon footprint reduction targets.
Our parts washers use aerospace accredited re-circulating cleaning fluids that are recycled; meeting the requirements of the Waste Framework Directive. Our spray equipment cleaning service is ideal for paint workshops, where fuselage and other components are sprayed against tight schedules. And for waste oil collection and waste management services no request is too small. Combining our services means one supplier, one monthly invoice and minimum disruption.
Safran Engineering Services, subsidiary of Labinal, offers high technology engineering services in the aerospace and ground transportation industry. With its 3,300 engineers and technicians, engaged within 9 Business Units around the world (France, Germany, United Kingdom, Spain, United States, Mexico, Morocco, India and Brazil) it is organized into competence centers combining expertise in the areas of Electrical Systems, Aerostructures, Mechanical Systems, Software and Electronic Embedded Systems, and Certification and Safety.
Specialist yarn suppliers offering a service on technical and industrial yarns and sewing threads. Covering composite yarns to fit customers specific demands, to more regular items such as carbon fibre, aramids (Twaron®, Kevlar®, etc), nylon, polyester, polypropylene, polyethylene and various speciality items. Tairyfil Brand high strength carbon fibre yarn offered between 1.5k and 48k and soon due to add high modulus carbon fibre to the range. Technical Application Yarns (TAY) offered for heat resistance, abrasion, cut resistance according to the end users needs.
For over 100 years, STL has been at the forefront of engineering technology, supplying intelligent, cost-effective precision engineering solutions for manufacturing industries across a variety of markets throughout the world. From bi-metal contact rivets, strips and micro-profile tapes to tool design, tool manufacture and component manufacturing, STL has a unique combination of technology, software and innovation which can be targeted at your own particular engineering requirement.
Experts in business systems for manufacturers, Sanderson helps to improve operational efficiency across your supply chain. With software ‘forged in Sheffield’, Sanderson has been supporting 100s of UK manufacturing firms for 30 years. Customers include Mettis Aerospace, GKN, Street Crane, RLC, LTE, Chinn and Kliklok. Learn how Sanderson helps you to improve your ISO/AS9100 compliance, business efficiency and competitive advantage. Sanderson delivers integrated business IT solutions – Order Management to Shop Floor, Quote to Cashbook and Quality Management. Be sure to visit Sanderson on stand H81.
Sandwell UK Ltd is a prime supplier of shot peening and specialist metal coatings to precision and performance engineering companies throughout Europe. Sandwell is run and operated by engineers and prides itself on high quality services approved to ISO9001:2008. Sandwell works with its customers to develop processes and finishes to engineer and develop component performance and reliability. This may be to increase load capacity, increase fatigue life, reduce friction or apply anti corrosion coatings for harsh environments. The company is focused on developing its technology and providing an efficient service to meet the needs of its customers.
Stand: B146 – co-locating with Techni-Modul Engineering
Leader in the manufacturing of tailor-made heating equipment by forced air convection, up to 650°C.
Designer and manufacturer since 1953, the company SAT offers today 4 ranges of industrial machines to meet every industrial needs :
- industrial furnaces & ovens,
- industrial tunnels,
- heat treatment furnaces for light alloys,
- rotomoulding & slush-moulding plants.
The company SAT has also developed a special range of ovens especially dedicated to aeronautical market for composite curing.
The most accurate ovens by the European Expert in forced air convection, vacuum and air pressure management systems included.
SAUER / DMG / MORI SEIKI
Visit Scaglia INDEVA to try our INtelligent DEVices for hAndling components in manufacturing, packaging and assembly. INDEVA offers a wide range of industrial manipulators and will design a system to suit any application. For repetitive, fast cycle times, with accurate positioning, inclination and rotation, our ergonomically designed devices are the answer.
Our expertise covers vacuum, pneumatic, magnetic and mechanical tooling supported by our electronic, zero-gravity, auto-balancing control system.
SCHUNK is a worldwide leading manufacturer of toolholding components, workholding systems and automation components. For more than 60 years, SCHUNK has been serving different markets with products that have set the bench-mark when it comes to technological leadership and long-term capabilities. With more than 2,000 employees worldwide located in 23 subsidiaries and 4 manufacturing facilities, SCHUNK can offer superior customer service and technical support all over the world
SCIGRIP Smarter Adhesives Solutions combines two global leaders in the adhesives industry, Weld-On and Holdtite, enabling the manufacture of world class Structural and Engineering Adhesive products on a global scale.
SCIGRIP has a strong research and development team focused on addressing customers’ specific application demands as well as improving customer productivity to achieve ultimate success.
SCIGRIP is committed to manufacturing quality products and maintains ISO 9001 certification for all of its manufacturing facilities.
SCIGRIP has also achieved multiple third party product certifications including Lloyds, RINA, and BRE that ensure product performance in key applications. With the joining of the Weld-On, Holdtite and Macroplexx brands, SCIGRIP Smarter Adhesive Solutions product offerings have expanded to include industry-leading technologies in 10:1 and 1:1 Methyl Methacrylate (MMA), Toughened Acrylics, Anaerobic, Cyanoacrylate (CA) and Ultra-violet (UV) cure adhesives, RTV Silicones, Epoxies, Polyurethanes, Activators & Primers.
Scott Bader is a multinational specialty chemicals group with combined global sales in excess of £175 million. The Group manufactures specialty resins, gelcoats and structural adhesives for the composites industry as well as emulsion polymers and alkyd resins for various niche markets. It has its headquarters in Northamptonshire, England, with production plants, research and technical service facilities in the UK, France, Croatia, the Middle East and South Africa, sales and distribution operations in Ireland, Scandinavia, North America, and Eastern Europe, and a global network of distributors and licensees, serving over 90 countries worldwide. For further information please visit www.scottbader.com
Sector Development Wales Partnership LtdMore
Seiki Systems has over 20 years experience in the development and provision of real time manufacturing execution systems that provide an immediate, visual and dynamic picture of the ‘plan to make’ production process – your strategic and operational manufacturing management solution. We specialise in software that is designed to maximise the efficiency of production equipment and plant resources by addressing the complete works order lifecycle, from top floor to shop floor.
For over a decade Severn Valley Sailplanes have been manufacturing precision foam cores for leading Aerospace customers from their well equipped facilities based in Gloucestershire. Rohacell® foam components are a particular speciality with expertise in:
• Full machining facilities
• AS9100 accreditation
• Quality and customer satisfaction driven
• Rohacell® material stockist
In 2010 RohaSell-on-line.Com added a new dimension to the business giving customers the opportunity to purchase Rohacell® material in part sheet sizes. Grades like Rohacell® WF, WF-HT and HF not previously stock-held in the UK can be purchased via their web base shop.
SGL Group – The Carbon Company – is one of the worldwide leading manufactures of carbon-based products and has the broadest product and technology portfolio, a global sales network and state-of-the-art production sites in Europe, North America and Asia.
As a technological leader, SGS is committed to providing leading-edge, high-performance products. It addresses the complexities of high-speed/high Efficiency machining with particular focus on Aerospace Alloys & Composites.
SGS manufacture a vast range of Rotary Solid Carbide Tools with High Productivity Milling Cutters a key feature of the portfolio.
Whether the requirement is the rapid roughing of tough Stainless Steels , High Speed Machining of Aluminium Alloys or the machining of Aerospace Carbon Fiber Composite, SGS has a Tool which will drastically reduce Production Cycle Times.
Add to this a full selection of Performance Twist Drills plus a massive array of Rotary Carbide Burrs & you will see why SGS are known as the SOLID CARBIDE TOOL SPECIALISTS.
Co-locating with Composte Test & Evaluation
SHD Composite Materials work at the leading edge of advanced composite technology and specialise in the manufacture of composite material prepregs and resin films.Centrally located in Lincolnshire SHD are currently expanding, moving to larger premises to house a 2nd prepreg manufacturing line and a uni-directional line.Ideally placed to meet individual customer requirements,good sevice and short lead times are as important as the quality of our products.Come and meet Steve and Helen Doughty on stand C146
Stand: D81 (co-locating with AMRC with Boeing)
Sheffield City Region is proud to partner with the Advanced Manufacturing Research Centre at Advanced Engineering 2013 to showcase the best of advanced manufacturing in the region. Home to the FT fDI rated number 1 Enterprise Zone in the UK offering business rate relief and enhanced capital allowances. Sheffield City Region provides investors with a one stop shop offering free services including; impartial property search, HR advice, support with routes to finance and access to business networks.
00 44 (0) 114 254 1313
The Materials and Engineering Research Institute (MERI) are showcasing the Nanofactory (ERDF funded) project, working to promote and encourage the uptake of micro and nano technology into product, process and service offerings by stimulating R&D activity and aiding collaboration between universities and companies.
Based at Sheffield Hallam University, we are a multi-disciplinary pursuing high-quality research & consultancy services. Our experienced team has a highly successful track record applying cutting edge research to find innovative solutions to industry problems.
Supported by a large and advanced range of equipment our experts can help you find or develop the right materials. Please visit our website for more info http://www.shu.ac.uk/research/meri/
Shimadzu’s innovative portfolio of Universal Testing Machines (UTM) is now available directly to the UK market. Founded in Japan, Shimadzu has more than 90 years of experience in designing, manufacturing and selling high precision Universal Testing Machines in every continent worldwide. The company’s highly reliable and operable UTM systems are now available across every industry sector from aerospace to zoology. Shimadzu can offer UK customers an extensive and innovative product range to provide the right solution for any specific budget or technical requirements to support applications from academic to R&D and manufacturing.
sia Abrasives, with its headquarters in Frauenfeld, Switzerland, is one of the world’s leading suppliers of innovative abrasive systems. For over 135 years it has developed and manufactured complete abrasives systems, tailored to specific requirements and applications, for surface finishing on work pieces of all kinds. sia Abrasives employs 250 people in the UK and over 1200 people around the world. It matches market leading products with ‘best in class’ customer service & technical support, holding more stock in the UK than any other abrasives manufacturer to ensure its partners receive a guarantee of maximum efficiency and truly outstanding service.
Siemens offers integrated technologies, vertical market expertise and services for improved productivity, energy efficiency and flexibility to advanced manufacturing customers at all levels of the supply chain. With our globally unmatched offering of automation technology, industrial software industrial control and drive technology, we equip manufacturers with what they need over their entire value chain – from product design and development to production. Our customers can also profit from our comprehensive offering of services tailored for their market and their needs. Don’t miss the opportunity to discuss any questions with us at our stand C16.
SIFCO Applied Surface Concepts provide job shop brush plating and anodizing services that can be carried out on site, at one of our job shops located around the world, or at your facility.
SIFCO is the world leader in selective, brush plating technology. We manufacture and sell SIFCO Process® solutions and portable brush plating equipment for use in OEM and repair plating applications to resize, rebuild, and enhance localized surfaces on industrial components.
At SIFCO we combine our 50 years of hands-on experience with industrial brush plating applications with our world class R&D capabilities to provide application development support to our customers that is second to none.
Sigma Composites Ltd (Sigma), part of the aerospace division of Avingtrans Plc, specialises in the design and manufacture of high quality structural and non-structural composite components for F1, Motorsport and Automotive market sectors, plus global industries including Aerospace, Defence, Security, and Medical.
The AS9100 Rev ‘C’ accreditation and ISO9001 standards are being incorporated throughout all areas of our business. Our highly experienced composite engineering team, constantly review proven manufacturing methods to develop new, innovative, lighter, stronger and cost effective solutions for the production of high quality advanced composite components.
Sigma is at the forefront in the continuing evolution of composites engineering. The focus on quality, delivery and cost efficient production, enables us to build strong relationships with our customers and is of paramount importance to our success.
Sigmatex is a world leader in converting carbon fibre, and other speciality yarns (Zylon, Innegra, S2 glass) into woven, unidirectional, multiaxial and 3-dimensional textiles for a wide number of composite material applications including aerospace, marine, automotive and high performance infrastructure products. Sigmatex uses advanced technologies to create textile solutions which optimise the performance of carbon fibre in complex structures. Sigmatex provides products to global customers through operations in the U.S., Europe and Asia.
Established in 1979, Sil-Mid Limited is a dedicated specialist supplier of Adhesives, Sealants, Lubricants, Silicones, Cleaning Agents and Surface Treatments.
With over thirty years of experience, Sil-Mid is uniquely placed to deliver a huge range of specialist products into new and existing customers. These customers range from small to medium enterprises up to global manufacturers and OEM’s.
We list over 14,000 items and source materials globally.
SL-Laser is a market leader in design and production of high precision 2D/3D laser projection and digitalization systems. For over 20 years we have been enhancing manufacturing processes for many global industries including Composites, Aerospace, Automotive etc. Utilising our in-house SL3D software, data is taken from the customers CAD system to accurately project patterns onto tooling or freeform surfaces eliminating the need for measuring tools or templates during the assembly and hand lay-up process.
www.smitherspira.com / www.rapra.net
The Society of Motor Manufacturers and Traders (SMMT) exists to support and promote the interests of the UK automotive industry at home and abroad. Working closely with member companies, SMMT acts as the voice of the motor industry, promoting its position to government, stakeholders and the media. Whether the industry is your business or it impacts on your organisation in any way, SMMT can deliver real business benefits to help your company meet the challenges of the future.
SMTC is a Composite Panel designer and manufacturer, working in the Aviation Automotive, Rail, Marine and Defence industries. We employ specialists in Solution Finding, Engineering, Project Management and R&D in order to provide complete and ready to assemble subsystems that integrate external components with high level finishing. Everything we do is focused on finding the right solution to enhance the value added of the customer’s products.
Stand: C15 – Co-locating with Pexa
Socomore is a European based company representing ? 31 M sales in 2012. After 3 latest acquisitions in 2013, all Group companies represent together about ? 38 M, 170 people and 13 subsidiaries. Socomore develops, manufactures and sales complete ranges of high added-value specialty chemicals used in critical surface preparation, processing, protection, and control operations. Many products of our ranges are approved by aerospace manufacturers, market that represents 75% of the total turnover.
Solartron Metrology – Taylor Hobson – Ametek Precision Technologes
Solartron Metrology provide precision linear measurement solutions for quality control, test and measurement, and machine control. Originally established in 1946 as Faroll Research, Solartron Metrology, now part of the AMETEK® Corporation, is a world leader in the innovation and manufacture of high-quality precision digital and analogue gauging probes, displacement transducers, optical linear encoders, laser triangulation systems and all associated instrumentation; incorporating the ground-breaking technology of the Orbit®3 Network to enable interaction between lasers and digital probes.
Solvent Replacement Ltd is a solvent replacement technology company. We are experts at replacing dangerous solvents and effectively eliminating hazardous waste production. Our Surfasolve products allow customers around the world in helping contribute to a safer and better environment for all.
While there has been other solvent replacements offered in the past, our products have been designed to address their failures. Surfasolve products have evolved to ensure success by eliminating the need for expensive heated work stations, employee dissatisfaction with performance and higher costs than conventional solvents. We have answered all the past issues with products that actually work better than hazardous solvents.
Because we concentrate exclusively on solvent replacement technology, we are able to focus on the needs of each customer individually to achieve thier goal in eliminating hazardous solvents
Construction & Repair Materials and Products
- Materials/Composite Reinforcement
- Materials/Other Const. Materials
- Supplies for Special Processes
Shop, Yard, and Marina Equipment
- Cleaning and Detailing Products
Sonatest is a global leading supplier of ultrasonic NDT equipment with many global blue chip clients. Our focus is to achieve our goals of “Simplicity, Capability and Reliability”, both within our product development programs and customer relationships. Sonatest has a long history of product innovation and market firsts, this continues today with our advanced NDT instrumentation such as the VEO phased array flaw detector, WheelProbes and Rapidscan real time 3D defect mapping, focussed on the Aerospace and Composite markets.
SpaceClaim, the leading provider of 3D Direct Modeling software, provides the most fit design solution for engineering and manufacturing. SpaceClaim’s acclaimed software is easy to learn and use and is completely CAD-neutral.
It enables engineers and other manufacturing professionals to rapidly create new designs or manipulate and edit existing 2D and 3D geometry, without the complexity of traditional CAD. Customers include Toyota Motor Corporation, Nokia Siemens Networks, Bosch, TE Connectivity, BorgWarner, Medtronic, Lotus Cars, Sharp, Ford Motor Company, LG Electronics, Eaton, K2 Medical Systems, FuelCell Energy, Emhart Glass, GE Aviation, Carl Zeiss, General Dynamics, and the U.S. Navy.
Specialty Fasteners, an ISO9001:2000 approved company, is both a manufacturer and distributor of quick release fasteners and hardware for the Defence, Aerospace and Industrial markets. SFC designed and manufacture the AeroCatch range of panel fasteners used in motorsport applications worldwide. SFC also manufacture Push Turn Fasteners, Snap-in Captive and SEMS screws for the electronics market. SFC distributes the complete Alcoa Fastening Systems range which includes well known brand names Camloc and Tridair. Quick Release Pins, Accuride drawer slides, Camloc gas springs and Hydraflow flexible hose and couplings complete the range.
Specialty Materials manufactures boron and silicon carbide (SiC) fibers by Chemical Vapor Deposition. Boron is used extensively in aerospace and sporting goods applications. Boron/graphite hybrid preforms are used for selective reinforcement to enhance compression, impact and open-hole compression properties. SiC fibers have outstanding high temperature mechanical properties for increasing strength, stiffness and use temperature of titanium matrix composites, and toughness of ceramic matrix composites. SMI has developed nano-sized boron powders for MgB2 superconductors.
Spectrum Metrology are specialists in the field of Optical Metrology, Surface Roughness, Contact and Non-Contact Metrology instruments. From detailed measurements of intricate components to rapid scanning of large assemblies, we offer a range of measurement solutions.
Recognised as a market-leading spraybooth manufacturer, STL delivers high performance, efficient and innovative spraybooth solutions across a broad range of industries. From intricate components to complete aircraft, STL engineers have repeatedly met the needs of the diverse Aerospace and Automotive industries. Energy efficient and versatile spraybooths for the repair, manufacture and refurbishment of all types of vehicles, aircraft, boats & trains. Flexible and innovative paint application facilities that combine quality with fast production times and low running costs, and has benefited a variety of industrial applications from hi-fi equipment to wind turbines.
The Stanford Marsh Group was established in 1965, to provide wide format printing equipment, computer aided design software and large format consumables to anyone with a design requirement or wide format output need.
We are the only company in the UK who can provide in-house manufacturer led service support, hardware and software sales of all the leading market brands, including AutoDesk, Canon, HP, Epson, Kip, Ricoh and Mutoh
For the tools and solutions you can count on when it matters most… the choice is Facom – the name synonymous with strength, durability and quality
Facom is Europe’s leading hand tool brand and has been working for over 95 years with industrial maintenance and automotive professionals. Facom is part of the world’s largest hand and power tool company, Stanley Black & Decker
Facom delivers innovation, continuously designing and improving it’s tools to save time, increase productivity and safety
With a range of over 9,000 products, including storage (trolleys, cabinets, benches, portable storage), standard tools (wrenches, screwdrivers, pliers, hammers) and specialist tools (automotive, electrical, aerospace, FME etc) to meet the needs of all repair technicians
Facom serves professional tools users in agriculture, automotive, aviation, government, industry maintenance, military, mining, oil & gas, transit, utilities and many more markets
For more information visit www.facom.com
‘ITW Stokvis Tapes are the world’s largest converter of PSA tapes and foams. We specialise in supplying to the Automotive Industry, via OEM’s and their tier suppliers. As a TS16949 accredited supplier, we meet the highest standards that our customers demand. For more information, visit www.stokvistapes.co.uk or call our team on 01442 821700’
Stonehill Engineering is a successful manufacturing business located in Cambridgeshire, UK. It provides a personal, time bound service to customers in a wide range of industries, utilising a skilled team and support of a well-respected parent company to ensure high quality engineered components and assemblies. Stonehill Engineering’s strategic planning and implementation of goals has enabled it to continually improve the quality of its production. It has a policy of continuous improvement and innovation and a total commitment to customer satisfaction, adhering to stringent quality checks throughout the production process
See our full range of sensors for pressure, position, force, vibration, acceleration, strain, instrumentation, tilt, inclination and torque. You can also view the Rebel CAN bus data logger system with GPRS which is ideal for mobile automotive applications.
We are exhibiting our NEW Linear Potentiometers which are ideal for the Automotive, Industrial and R&D markets. We will also be showing the most extensive pressure sensor range in the UK.
Superform, the world’s leading supplier of complex lightweight formings to the Auto, Rail and Aero industries is experiencing strong demand and rapid growth. Both our UK and USA facilities are looking to recruit ambitious and dynamic professionals to support all key business functions globally during these exciting times. We have immediate career opportunities within both our CAD/Engineering and Business Development departments. Contact us to find out more about these exciting opportunities and join this successful team. Please visit us at our stand H102 or send your CV to email@example.com
STE will be exhibiting a range of high performance Oil Mist/Oil Smoke separation systems from 3Nine AB. This unique patented technology separates oil particles from mist or coolant using a special centrifugal process. This is able to remove 99.9% of all particles down to 1 micron in size and return the liquid to the machine tool or process. Any smaller particles are processed through a HEPA H13 filter which ensures that pure air can be returned directly into the working environment 99.995% particle free. The unique benefits of the technology are that it separates instead of collecting so maintenance is minimal making life cycle operating costs substantially lower than other technologies. The units even have an automatic self cleaning system for more difficult applications and an indication system for HEPA filter condition.
The exhibition offers the excellent opportunity to view the products and discuss your specific requirements with our technical team and directly with the manufacturer who will be present.
Superior Technologies Europe Ltd.
11 Devonshire Business Park
Knights Park Road
Basingstoke RG21 6XN
Sutton Tools is a focused team of 450 people who have enabled this globally competitive program of high value products.
As one of the world’s largest independent family owned cutting tool companies, Sutton Tools has a long standing commitment to our employees and partners.
We continue to expand our business and produce ever higher levels of specifications that exceed market expectations.
Our aggressive investment policy compliments our product offer with globally integrated logistics, research and development and value added services at world best practice.
We invite our current and potential new partners to visit our facilities and let us demonstrate our value.
SYS are Stratasys UK & Ireland Platinum Partners. We sell, install and support the full range of Stratasys and Objet 3D printers and additive manufacturing systems. These are the industry’s most advanced rapid prototyping solutions, speeding up product development and cutting design costs. SYS is the partner of choice for Stratasys, with a dedicated ISO9001:2008-backed service team. We work with the leading names in automotive and aerospace manufacturing.
Takumi Precision was established in 1998. The company employs 48 full time staff, while occupying a 22,000 sq. ft. custom built facility, complete with a wide range of latest technology CNC machinery , in Raheen Limerick. Takumi has detailed expertise in the manufacture of low to medium volume precision components. This competence has particular relevance to the Aerospace sector.
Aerospace contributes a significant proportion of Takumi revenues. . The business is concentrated in wing and fuselage components. The nature of these parts would be well known across the aerospace industry with elements including Butt-Straps, Shear Ties, Rib Posts and Splices, as well as a wide variety of brackets. The company has invested heavily in the necessary CMM and CAM technology and have developed a major competence in “one hit snap off” machining which guarantees the integrity and repeatability of even the most complex components.
Tappex Thread Inserts Limited is proud of its quality product, technical innovation & exemplary global customer service. Design, development & manufacture of Brass, Steel or Stainless Steel threaded inserts for applications in plastics, composites & light metal alloy offers off-the-shelf standard products or bespoke solutions to suit customers exacting requirements. Grooved pins, thread forming screws for thermoplastics & rivet nuts for composites are available. Our Applications Engineers provide a Technical Advisory Service, prototyping & mechanical testing, providing cost effective solutions for fastener applications throughout the world.
Markets served include OEMs, Automotive, Aerospace, Rail, Medical, Manufacturing Tools & Telecoms.
Tata Technologies, founded in 1989, is a global leader in Engineering Services and Product Development IT services to the global manufacturing industry; enabling ambitious manufacturing companies to design and build better products. Tata Technologies is a company of innovators, specialists in the design engineering space, who apply cutting-edge technology to provide a competitive advantage to customers in the manufacturing sector. The company is a strategic partner for developing complete vehicles (VPD group), engineering subsystems and components (E&D), managing the NPI process and collaborative engineering (PLM), and tying together information created and used throughout the extended manufacturing enterprise (ESG)
Taylor Hobson is an ultra-precision technology company operating at the highest levels of accuracy within the field of surface and form metrology. We provide contact and non-contact measurement solutions to the most demanding applications on a global basis, with a worldwide infrastructure to support our clients, wherever they may be.Taylor Hobson is part of the Ultra Precision Technologies Division of AMETEK Inc, a US corporation based in Paoli, Pennsylvania. With more than 10,000 employees generating annual revenues in excess of $2.5billion and a strong record of earnings growth and cash generation, AMETEK Inc provides a robust environment to assure Taylor Hobson’s continued success into the future.
TCB-Arrow is a successful global organisation providing components and assembly solutions in thermoplastic and elastomer materials. Developing long term partnerships with customers, where ideas take shape from concept through to full scale manufacture.
TCB-Arrow has been established for 25 years with a proven track record in design, development, and manufacturing. We provide total solutions to the Medical, Aerospace, Automotive, Defence and Industrial market sectors.
Solutions through Partnership
TE Wire & Cable, a Berkshire Hathaway Company, is the world’s leading supplier of performance enhancing autoclave thermocouple and thermocouple interconnect solutions. Products are designed for ease of use, cost savings, and to allow curing more parts per autoclave per week. We offer four unique solutions: AccuClave® autoclave thermocouples; AccuFlexT flat reduced markoff thermocouples; AccuClave-XT rugged reusable single circuit thermocouple interconnects; AccuConnectT rugged reusable multicircuit thermocouple interconnect. All products are engineers to meet rigorous customer demand for reduced cost, 0% failures, on-line traceability, no-redundant, labor savings, no vacuum leaks, high accuracy, no surface markoff.
At 87.2 acres Teal Park is the largest new Employment Park in the East Midlands. The fully serviced commercial development near the City of Lincoln links directly to the A46 Lincoln Bypass, therefore provides excellent road access via the dual carriageway A46 to the M1 at Leicester, the A1 at Newark, the north via the A15 to the M180 Humber Bridge and ports of Immingham, Grimsby and Hull.
Teal Park has become the new home for Siemens’ 155,000 sq ft. gas turbine servicing facilities and offices which were completed in late 2012. An outline consent for the entire site was granted in 2011 for 1.3 million sq. ft. of B1, B2, B8 space along with ancillary uses which include a Public House, Hotel, Leisure use and Showrooms.
Do you want extra Temperature Controlled Storage which
- is fully traceable whilst maintaining temperature between -25 and +20⁰C
- could be ready to use within hours?
- has no capital expenditure?
….and is supplied by a company which understands the needs of companies in the Advanced Engineering sector? Team Refrigeration have worked with the NCC and the motorsport industry and is ready and waiting to provide you with the extra coldspace you need, when you need it. Come and talk to Tim on stand E156A.
Tebis develops CAD/CAM solutions for the automobile and aircraft industry as well as their subcontractors from the styling, model making, tool and mould manufacturing sectors. As of today, more than 8200 systems have been installed at more than 1950 sites world-wide, including automobile manufacturers such as Aston Martin, Audi, Bentley, BMW, Daimler, Ford, Honda, Jaguar Land Rover, Opel, Toyota, Volvo, and VW. One important prerequisite for such high acceptance are the high quality results, which Tebis customers achieve on their milling machines. Ultimately, the high competence of Tebis’ application engineers plays an ever more decisive role in supporting and optimizing existing process lines when integrating Tebis CAD/CAM systems.
Techni Measure can supply a wide range of sensors for measuring various parameters. Strain gauges and bonding accessories are available, as well as strain gauge based transducers for load, pressure and displacement. Piezoelectric sensors measure vibration, dynamic force and dynamic pressure, and we have various ways of measuring displacement based on resistive, inductive or capacitive technology. Orientation and wireless systems are available, as well as pressure seals and temperature sensors.
As an integrator for industrial solutions we are specialised in design, manufacture, and commissioning for composite parts production equipment. We can help you for your development, prototyping and industrialization requirement. Our turn-key solutions are viable, cost-effective and specifically engineered to fulfil each specific composite project. All equipment and toolings can be supplied on a bespoke basis. Moreover we have extensive experience with various processing technologies: RTM, FPTM, Infusion, Prepreg and Thermoplastics.
“TFP develop and manufacture high performance nonwoven veils and mats from an exciting portfolio of raw materials including polymers, particulates and speciality fibres such as carbon, aramid, glass, polyester, metal & metal coated materials.
Our customisable range of advanced nonwoven materials offer an effective means of applying surface engineering solutions to the many challenges encountered in the advanced composites industry. Suitable for use in all major composite fabrication techniques, TFP veils can deliver a superior quality surface finish as well as providing additional functionality such as EMI/RFI shielding, electrical conductivity, static dissipation & enhanced corrosion resistance. We pride ourselves on our track record of innovation, expertise & process capability which enables us to customise a solution to suit your requirements.”
Formed in 2002, Tecnico Logix has built a reputation as being a world leader in the application of Dimensional Management and Variation Analysis.
There is probably no other design improvement effort that can yield greater benefits for less cost than the careful analysis and assignment of tolerances.
Working closely with our clients we are able to simulate the variation within assemblies that occurs due to manufacturing tolerances and assembly methods, reducing both assembly costs and time by identifying problem areas.
We have extensive experience of applying tolerance simulation techniques in practical applications, ranging from tolerance allocation in concept development phases, through tolerance analysis in design embodiment, to diagnostic exercises in production runs where non-conformance occurrence can be eliminated.
Tees Valley in the North East of England offers many benefits to advanced engineering companies looking to expand in the UK. The area has a thriving engineering sector, skilled workforce, excellent transport links and a wide range of sites and premises, including a number offering Enterprise Zone incentives.
The Business Investment Team at Tees Valley Unlimited offer free local knowledge, support and advice to companies plus the team have links to both private and public sector support organisations.
Tektronix is a leading supplier of test equipment for engineers focused on electronic design, manufacturing, and advanced technology development – with custom products and solutions for design and debug.
Automotive solutions include debug and verification of the latest embedded designs – such as common automotive serial buses (CAN, LIN, FlexRay and MOST). Aerospace solutions include signal generation and analysis for radar, EW, surveillance and comms.
Telford boasts more serviced commercial land that any other major employment centre in the Midlands. Land values are amongst the most competitive in the UK and within close proximity to major motorway networks, rail and international airports and ports.
Telford offers links to regional, national and international markets, with easy access to automotive supply chains and customers.
A high-tech workforce with a strong bias towards automotive and advanced manufacturing, a fast growing population, and a strong commitment to education and training will equip the future generation with skills needed to support business growth.
Established in the U.K. in 1966 as the sales and service operation of Telonic Industries Incorporated, a U.S. company specialising in R.F. products we became an independent company following a management buy-out in 1982, but continued to sell Telonic Industries products. We became the U.K. distributor for Kikusui Electronics Corporation of Japan in 1976, the U.K. distributor for EPS GmbH (Takasago) in 2000; distributor for Digimess formally Grundig Digimess in 2001 and the U.K Distributor for Magna-Power in 2005. In 1995 we achieved approval to IS09001:2000 with NQA (National Quality Assurance).
We have also launched our new instrument hire website www.hireoption.co.uk
TFC, one of the leading European suppliers of fasteners and components to industry, will be displaying their extensive range of space saving Smalley Crest-to-Crest® flat wire wave springs and Spirolox® edge wound retaining rings.
As a compact alternative to conventional helical coil springs, Crest-to-Crest®wave springs develop similar forces, yet occupy just a third or less of the same axial space.
With a uniform radial profile, Spirolox® retaining rings can fit into tighter radial spaces than conventional circlips as there are no protruding lugs to interfere with the assembly.
The Advanced Engineering Show provides an ideal opportunity to view the products and discuss specific enquiries with our technical team.
The 3D Measurement Company Ltd is a world class ISO 9001 accredited service company, specialising in 3D scanning and professional inspection to 3D motion and strain analysis. We use the market leading GOM optical systems for all of our measurement services. Our 2,000 square foot dedicated measurement facility allows us to accept parts of all shapes and sizes and also helps us control costs at the customer side, to offer a competitive service. As former GOM engineers our system knowledge gives us the unique ability to employ accurate measurement principles to offer services to match the industry high standards.
The Expanded Metal Company is the original pioneer of expanded metal mesh, offering an unrivalled range of meshes, combined with the ability to offer bespoke solutions. Glass, plastics and other materials can either be incorporated into or attached to meshes for increased strength and security purposes or aesthetics.
The Information Daily was founded in 2003. We focus on news and features about public policy and news/opinion that might in some way influence policy development. We maintain two, full time, news video teams headed by trained broadcast news journalists. The majority of our readers are decision makers/ key opinion influencers in the commercial and manufacturing sectors, policy and decision makers in the public sector and individuals in think tanks and the third sector. Each weekday morning we send an email alert to over 11,000+ readers. In September 2013 we had over sixty thousand readers. The Information Daily is free to read.
The Northern Healey Centrewww.northernhealey.co.uk
TRP continues to support the aerospace sector with our bespoke transportation products and services.
We design, manufacture and supply specialist bespoke transport boxes for all sizes of assemblies large and small. Also for high quality machine parts flat and foam details, kit spares and line side components.
Foam lined kitting shadow trays are supplied to a wide range of tier 1 and 2 aerospace companies for the safe transportation of high quality and high costs parts and assemblies.
Component transport handling which includes specialised shelving, racking and protection systems is our forte and manufactured on the premises.
All timber transportation products are manufactured from ISPM15 (Infestation Free) materials.
Thormac Engineering has been manufacturing since 1979 providing quality injection moulding manufacturing to medium and high technology industries. We specialise in large parts and cater for low volumes, moulding in polypropylene and engineered materials such as silicon and memory plastic in addition to nylon, polycarbonate, ABS and polyethylene. We have seventeen injection moulding machine ranging in tonnage from 30 tonne up to 1100 tonne. Thormac currently manufactures for blue chip customers in the automotive, medical, energy and construction industries in the EMEA and Europe.
Tinius Olsen is the leading manufacturer and supplier of materials testing systems which are designed for R&D and QC departments to measure the strength and performance of both materials and finished components. Whole series of physical tests are available including tension, shear, compression, flexure, puncture / burst, friction, tear, and peel strength tests, melt flow index, impact resistance, heat distortion and Vicat penetration, and torsion, in accordance with key ISO, EN, ASTM, DIN, BS, JIS etc and industrial testing standards.
Tiro Associates Limited is a leading recruitment consultancy, working with leading Automotive, Aerospace and Electronics OEM’s, consultancies and their suppliers worldwide. Our experienced consultants specialise in specific industry sectors to ensure they are experts in their field and well placed to advise you on your employment prospects, matching your skills, experience and career aspirations with the needs of our clients. Dedicated to quality and professionalism, we are a corporate member of the Recruitment & Employment Confederation (REC) and an ISO 9001.2008 registered firm.
TML Precision Engineeringwww.tmlcnc.com
TotalSim is a leading Computational Fluid Dynamic (CFD) consultancy providing fluid flow analysis and engineering solutions. We specialise in motorsport and vehicle aerodynamics but also work regularly for customers in industries as varied as renewable energy, elite sports and pharmaceuticals. TotalSim has pioneered the use of design optimisation and open source software in CFD consultancy. TotalSim employs thirteen engineers with many years experience of CFD application and a combined pool of expertise capable of tackling most engineering problems. Our computing hardware and CFD software philosophy is well refined. We combine open source, commercial and in-house codes to provide a competitive and flexible approach to analyses of all sizes.
Trelleborg AEM has developed extensive composite material and application expertise for over 50 years. Our core competencies and unique combination of global manufacturing capabilities and material science have led in our involvement in many cutting edge areas that range from the deepest oceans to outer space. Trelleborg AEM provides a range of proven solutions into the aerospace, industrial, defence and subsea markets.
Trident Foams Ltd is a UK based company and has long been a manufacturer and supplier of Polyurethane foams to the composites industry. We have a very wide range of PU foam products that can be supplied in liquid, sheet and bespoke machined format. Trident has also been successful in the distribution of all the range of AIREX core materials. This association has proved of great benefit to both Trident and AIREX customers alike. With our extensive UK stocks we aim to provide a rapid turnaround of most all products from the AIREX range. This coupled with our in house machining facilities gives all our customers access to a complete and local service.
Trubiquity is headquartered in Troy, Michigan, USA, with other offices in USA, Germany and the United Kingdom as well as an international network of resellers. Trubiquity provides Managed File Transfer (MFT) and business process integration solutions for automotive, aerospace, advanced manufacturing, retail, finance, healthcare and consumer goods industries and enables its customers to connect, move and share key business information with its global teams and valued partners.
TRW Conekt is a consultancy and engineering test services business that generates new ideas and applies science & technology to product development, manufacture and validation.
Combining the skills of specialist engineers with our in-house UKAS accredited test facility, Conekt is uniquely positioned to offer a complete engineering service from concept design and development through prototype and validation testing to low volume manufacture and systems integration.
Conekt’s experienced engineering teams work closely with customers to define the project requirements, taking account of the skills and knowledge of both partners, whether for a part of or the entire product development pipeline.
TTI Group Ltd provides an extensive range of Heat & Surface Treatments (including HIP) to the UK engineering industry through a total of 7 strategic locations. All sites offer a combination of national/ international accreditations from the baseline of ISO9001:2008 through to TS16949 and Nadcap, as well as multiple customer and OEM approvals. The Birmingham site offers three specialised surface engineering processes:
(i) Nitrotec – A process which is used to enhance the surface and strength characteristics of a range of carbon and low alloy steels (wear resistance, fatigue performance and excellent corrosion resistance are among its properties).
(ii) PVD Coatings – Typically applied to a wide range of cutting and metal forming tools for improved life. Decorative coatings are also becoming increasingly popular for PVD because they will not tarnish, chip, fade or corrode.
(iii) Plasma Nitriding – The widest range of Plasma Nitriding and Nitrocarburising facilities available in the UK are supplied by TTI Group Ltd.
With over 50 years’ experience, TÜV SÜD Product Service is a leading international expert in providing testing, certification, qualification, training and consultancy services to a range of industries covering the Aerospace, Defence, Machinery, Medical & Health, Radio & Telecoms, Rail, Trade, Electronics & Consumer sectors. Our expert engineers will listen to you and understand your expectations before any service is delivered. Choose certainty. Add value.
Tygavac Advanced Materials Ltd is a division of Airtech Advanced Materials Group – innovators in the supply and manufacture of vacuum bagging and composite tooling materials. Tygavac supplies leading aerospace, wind energy, motorsport and marine manufacturers with a complete product range, engineered kitting solutions, strong technical support and a worldwide distribution network.
Investing in the future of UK aerodynamics With the global market growing, the UK must move with it in order to stay ahead. To this end, Government, Industry and Academia collaborated to establish the Aerodynamics Growth Partnership (AGP) in 2010. The AGP identified our world-leading aerodynamics capability as key to the UK’s dominance in the aerospace sector. Guided by these findings, Government and Industry decided to come together again and open the UK Aerodynamics Centre in March 2013. Showcasing UK capabilities in complex aerodynamics UK Aerodynamics exists to protect, exploit and position leading advanced UK capabilities, preserving design and manufacturing jobs in the UK.
UK Flow Ltd. offers the technically advanced products of the German suppliers and leading specialist in Fluid Technology, VSE Volumentechnik and Beinlich Pumpen. UK Flow is your competent partner for standard and customer-specific solutions of high precision flow meters, electronic evaluation devices, metering and high capacity pumps as well as pump system solutions for fluid, drive, measuring and process technology applications. We provide distribution, application expertise, quality service and technical support for the UK market.
With professional advisers across 96 international markets, UK Trade & Investment is the government department that helps UK-based companies succeed in the global economy and assists overseas companies in bringing their high quality investment to the UK.
Ultrafine Technology is the UK’s leading independent supplier of endoscopes and video systems, and also has a large international presence supplying leading industrial, scientific, law enforcement and security customers all over the world.
Based in Old Isleworth, West London, Ultrafine is part of the Seven Technologies Group of companies.
Ultrafine was established in 1985 and has built up an enviable reputation for supplying innovative solutions to remote visual inspection problems in industrial, scientific, law enforcement and security fields.
Union Industries are market leaders in the design, manufacture & installation of Heavy Duty Hangar Curtains, Partition Walls and Enclosures for heat/dust retention and toxic containment.
Union pride themselves on their ‘Superior Quality’, with key products designed & made in the UK. This includes a range of Industrial High Speed Doors, as used in industry sectors such as distribution, aerospace, automotive, waste & recycling, food manufacturing and storage.
Uniteam Spa with headquarters in Thiene, Italy was founded in 1990. The company has specialised in CNC machining centres, developing several patented solutions. It was one of the first producers to use five-axis electrical spindle technology. Today, the company is acknowledged as one of the the main CNC producers and reliable source of innovative technology, it is among the market leaders in the area of special composite machinery offering high-quality solution appreciated by many companies in automotive, caravan, yacht, aeronautical industries. Uniteam offers specialised machines customised according to the different individual needs of its customers developing and producing tailor-made solutions.
UNITEMP is a leading supplier and manufacturer of environmental test equipment in the UK, and the main distributor for the ESPEC Corp range of equipment covering from Bench-Top to Walk-In chambers, Burn-In and Evaluation systems.
Also representing CHART Ind, range of HALT & HASS test systems, capable of providing complete turnkey projects, LN2 vessels, pipework , Chamber and Vibration system.
Visit the company website for further information:
Innovation 1st is an exciting University of Wolverhampton project which is part-funded by the European Regional Development Fund. The project helps organisations explore business opportunities through innovative use of technology. Companies are able to try out the various cutting edge devices housed in Visualisation Centres in Wolverhampton and Telford, discuss ideas with advisors who have industry knowledge and experience and explore new and innovative technology for business.
VAC Innovation Ltd supports the composite industry with a range of vacuum bagging process materials developed to offer a technical solution at a highly competitive price. VAC Innovation has a reputation for superior quality of products and service which has established its position as the preferred supplier of vacuum bagging process materials to many high-profile customers within the composite industry. Materials include:- Release Films Peel Plies Flash Tapes Breathers Sealant Tapes Bagging Films Connectors Gauges Vacuum Pumps Hoses
Now part of the Valmiera Glass Group, a leading European manufacturer of glass fibre based products, Valmiera Glass UK’s principle activity is the weaving and finishing of glass fibre fabrics for use in a wide variety of technical applications, including fabric for composites and aerospace industries, for thermal insulation and coated products, filtration fabrics, grinding wheel fabrics, decorative fabrics and architectural membranes. The company benefits from innovative technology and the most up-to-date manufacturing facilities and operates a quality control system that fulfils the strict international requirements for the aerospace, electronics and construction industries.
Variohm EuroSensor Ltd are specialist suppliers of Industrial Sensors and Systems, to monitor:-
Variohm have a large team of experienced technical sales engineers and we pride ourselves on the technical support we offer, ensuring the best sensor is used for the application.
Many of these sensors are supplied from stock or on short lead times, we also have the capability of in-house design, should we not have the ideal sensor from our comprehensive range.
For further information please contact us on:
Tel +44 (0) 1327 351004
Fax +44 (0) 1327 353564
Email sales @variohm.com
VELOX is a European leader in raw material specialities distribution. VELOX offers its customers an extensive product range and specific market know-how for plastics, composites, rubber and paints & coatings applications. VELOX is your one-stop provider for the full range of speciality product expertise, from detailed technical consultancy to carefully targeted product marketing. Our close cooperation with industry-leading manufacturers and worldwide sourcing mean we are best-placed to meet your requirements for innovative industrial raw material products and know-how.
Vertech is a leading Taiwanese PCB manufacturer providing full range PCB production. Our factories are accredited with TS16949 and offer PCB for automotive, industrial, telecommunication and many other applications. We offer heavy copper, high layer count, HDI, gold bonding, MCPCB and flexible PCB. Brightek is a leading Taiwan-based LED company. We are a LED packaging manufacturer specialising in various LED components and modules. Our product portfolio includes PTH Lamp, SMD, Dot Matrix, Superflux, CHIP LED, High power LED…etc. For automotive application we are undergoing the important AEC-Q101 test.
Co-locating with Gerber Technology
Virtek Vision International, the leader in high precision laser-based templating, inspection and CNC manufacturing, member of the Gerber group.
Gerber Technology Inc. the leader in automated composite nesting and cutting.
Gerber Technology and Virtek together offer the widest range of solutions for composite assembly productivity improvement combined with first-class composite process expertise and more than four decades of experience in high-technology, Virtek and Gerber offer LaserQC™, LaserEdge™, LaserPlanner™, GERBERcutters® to help streamline operations. Our proven solutions increase productivity, improve turnaround times and significantly reduce material waste and labor costs at customers around the world.
Visual Management Technologywww.v-m-t.co.uk
Volt Engineering is a dedicated supplier of contract and permanent engineering staff across Europe. Aerospace and automotive companies of all sizes trust us to provide the right people at the right time. Providing true consultancy in a challenging marketplace we offer a level of commitment that is unique in the industry. We deploy professional solutions to build partnerships focused on quality, results and mutual success. Whether you are looking to discuss and develop your career, or require support in recruiting engineering talent, visit our stand for professional, straightforward, and friendly advice.
Von Roll is the recognized market leader in the field of insulation products and systems, as well as for composites materials and parts for various industrial applications. UK is serviced by a central location in Bradford providing distribution of Von Roll products including High/Low pressure laminates, Tubes and Mica products. This is complimented by a comprehensive modern machining facility. BS 9001-2008, BS 18001-2007,BS 14001-2012
As part of the Verify Group of companies, VTR UK benefits from over 35 years of experience within the aerospace and defence markets supporting many of the Top 100 aerospace and defence manufacturers. We are market specialists, and our core business is providing contract and permanent staff in quality, production and manufacturing disciplines. Our unique selling point is that each candidate we submit is technically screened against your specific requirements by one of our in-house engineers. This approach ensures that only qualified candidates are submitted against your vacancy and gives you the confidence that the candidates supplied genuinely bring the skills and experience of their CV.
With 60 years trading experience and 15,000+ products currently held in stock, WDS are the UK’s leading manufacturer of Standard Parts, Machine Accessories, Modular Workholding, Spencer Franklin Hydraulics and Marlco Broaches.
Products on show, will include Quick Release Pins, Clamps, Gas Struts, Castors, Cast Iron/Aluminium & Steel Section and MicroLoc plus many more.
Our products are utilised in industries such as Aerospace, Defence, Automotive, Food and many more.
For Design, Research and Development, our 2D/3D CAD Drawings are FREE to download at www.wdsltd.co.uk in all major design programmes.
With a Technical Support Line and local experienced representatives, WDS strive to find the solution to your requirements.
Weldstone GmbH is the European partner of the American company CMW Inc. and a member of the Weldstone Group. As an expert in the areas of refractory metals (tungsten/ molybdenum), ceramic components and welding technology, the Weldstone Group operates worldwide actively and successfully. Areas such as development, manufacturing and sales of customized products under personalized label for the most various industrial applications, particularly rank as strengths of this corporation group. Among its international wide-ranged sales network with own logistic centers located in USA, Europe and Asia, Weldstone also owns manufacturing sites in China which produce tungsten, molybdenum and ceramic products. Constant quality controls form the production basis in accordance to international standards. Supported by many years of experience as well as continuous research and development, premium products for highest demands are guaranteed, leading last but not least the field of tungsten inert gas electrodes (TIG) and becoming the international market leader. Being part of the IBG Industrie-Beteilungs-Gesellschaft mbH & Co.KG, an industrial holding which has been worldwide active for more than 30 years and claims more than 50 sales and production subsidiaries, the Weldstone group is a component of an exceedingly successful consolidated company.
Wilsons is one of the fastest growing specialist metals stockholders in the country, serving the ferrous and non-ferrous metals requirements of leading-edge industries including Aerospace, Defence, Powergen and Motorsport – all demanding industries where ‘only the best will do’. Wilsons are leaders in the stockholding and distribution of high integrity ferrous and non-ferrous metals and enjoy ‘preferred supplier’ status with many customers.
The stock range held by Wilsons is unequalled – Over 3000 items totalling more than 10,000 tonnes of Aerospace released products with a total value of around £20 million. Just one example is Aluminium Alloy L168 Extrusions in over 500 different sizes. In addition an extensive range of commercial materials including one of the UK’s biggest ranges of Copper Nickel fittings.
For many years Wilsons was recognised as the UK’s main stockist of Aluminium for the Aircraft industry, taking up to 75% of the total stockist business in the sector.
Over time, the company also introduced ranges of other materials, including commercial specifications. This includes Copper Alloys (Aluminium Bronze, Copper Nickel), Stainless Steel, Titanium, Nickel Alloys (Inconel and Monel) and other exotic alloys.
Wilsons offers an industry-leading processing capability that includes; Kasto (TEC A5 & A4), Amada and Behringer bar saws which deliver high-speed, accurate and burr-free cutting of bars and other extrusions up to 540mm. Plate saws that provide cut blanks up to 155mm thick and up to 4m long. Guillotine cutting of Aluminium sheet up to 10mm thick and 3m long. In addition, laser or water-jet cutting can be provided. Sheet can be poly-coated as required.
Established more than 60 years ago, Wilsons is privately owned and independent from manufacturers, yet also part of a large international group of companies. That combination means financial stability, purchasing power and the ability to be forward-thinking and customer-focused.
Wirth Research is a fast growing group of innovative engineering companies specialising in research, development, design and manufacture of advanced composites for the motor racing industry and other high performance technology sectors. Founded in 2003,it has pioneered the use of advanced virtual engineering technologies, developed in-house, which enable the use of a complete simulated design, development and testing process reducing the need for wasteful manufacture of development models and prototypes. This entirely digital development engineering process has reduced overall project timing, costs and created a string of record breaking designs.
The University of Warwick has an outstanding reputation for research and teaching and is the most successful of the recently founded UK universities. WMG is an academic department established in 1980 to reinvigorate manufacturing by applying of value-adding innovation and cutting edge research. WMG is one of the world’s leading research groups, an HVM Catapult partner and an international role model for how universities and business can successfully work together.
With guaranteed delivery before 12:00 noon, six days a week, for any cutting tools ordered before 18:30 the previous working day, combined with industry-leading technical and customer support, WNT (UK) is the first choice cutting tool supplier for the SME engineering manufacturing sector. The in-depth technical expertise is provided by WNT (UK)’s technical sales team who have extensive machining experience, providing a valuable resource to customers and award winning customer service.
Wolfangel is a, ISO 9001:2008 certified, producer of composite equipment such as fibre spray, gel coat spray, metering, RTM or customised equipment with more than 40 years’ experience. Our small composite workshop enables us to run customer tests as well as to test new equipment. Today Wolfangel offers a wide range of PLC equipped machines due to customers’ requirements regarding quality management, process reliability and reproducibility. Today Wolfangel machines are sold to more than 30 countries around the world.
Woodford Engineering Consultancy provides Aircraft Systems Engineering expertise to the Aerospace industry founded upon decades of OEM experience.
We cover the full engineering life-cycle from system architecture studies to in-service support, including equipment specification, testing and certification of equipment and systems as well as systems safety analysis, management of major modification programmes, research projects and data analysis/incident investigation.
Yaplex Ltd is a new name in the materials handling industry offering what the company claim is the most comprehensive range of equipment in the market. Designed specifically with health, safety and profitability as the key objectives, it is claimed it is the fastest handling system on the market today. With its wide range of Manipulators up to 400kgs, Vertical Balancers up to 1000kgs, and Balance Arms up to 500kgs.
At Automotive Engineering 2013 you will have an excellent chance to both hear about and see the latest technology updates from the field and get to know how Yokogawa can help you to overcome your measurement challenges. On the booth we will showcase a wide range of our test and measurement instruments. Come and meet our product experts at stand G91.
Flow calibration laboratory for all types and makes of fluid and gas flow meters. UKAS accredited to ISO 17025 for air flow, water flow, oil flow, air velocity, pressure, electrical and temperature simulation. Extensive experience in automotive and aviation sectors. Full range of onsite calibration supoort.
Zerust is a provider of Volatile Corrosion Inhibiting (VCI) packaging and rust prevention products (polythene film, foam, paper & oil).
Zerust products are used in the automotive, aerospace and oil & gas industries for protecting metal components parts that are shipped or stored as well as the protection of electronics and pipelines.
Zircotec are experts in plasma-sprayed high performance surface coatings and finishes. We have developed a range of ultra-high performance ceramic coatings to protect carbon composite and plastic components from radiant heat or hot gas, provide fire resistance, and protect materials against delamination and resin melt. In addition Zircotec offer hard metal coatings to prevent damage from wear, abrasion, stone chips, etc. and a thin electrically conductive coating to shield composite components for EMC.
Zoller develops the most advanced tool presetting and management systems available to manufacturers. If you need to ensure that tools are accurately and correctly set before production commences, then you need a Zoller system. Zoller has a wide range of inspection and measuring equipment for cutting tools including non-contact vision-based systems and fully-automated all-in-one measuring solutions which cover all application areas and functions of cutting tool presetting, inspection and management.
Zund UK is a leading supplier of automated cutting systems for the Aerospace and Automotive industries. The Zund brand is synonymous with quality and reliability and with our modular tooling concept the machines are well placed for cutting a wide range of composite materials.
Introducing our new workflow software which ensures reduced material and labour costs through precise, one click, component capture and extremely efficient nesting.
Zwick Roell manufactures and supports a wide range of materials testing machines, systems and accessories for use in research, quality control, production environments and academia.
Our extensive portfolio of products can be used to determine the mechanical properties of both materials and components and can accommodate tension, compression, flexure, friction, peel, torsion, impact, melt flow, hardness and fatigue testing procedures.
To complement our products we provide technical support, planned maintenance cover, UKAS calibration and comprehensive operator training.